IPD30N06S2-15 OptiMOS(R) Power-Transistor Product Summary Features V DS * N-channel - Enhancement mode 55 R DS(on),max (SMD version) * Automotive AEC Q101 qualified ID V 14.7 m 30 A * MSL1 up to 260C peak reflow * 175C operating temperature PG-TO252-3-11 * Green package (lead free) * Ultra low Rds(on) * 100% Avalanche tested Type Package Marking IPD30N06S2-15 PG-TO252-3-11 2N0615 Maximum ratings, at T j=25 C, unless otherwise specified Parameter Symbol Continuous drain current1) ID Conditions T C=25 C, V GS=10 V T C=100 C, V GS=10 V2) Value 30 Unit A 30 Pulsed drain current2) I D,pulse T C=25 C 120 Avalanche energy, single pulse E AS I D= 240 mJ Gate source voltage V GS 20 V Power dissipation P tot 136 W Operating and storage temperature T j, T stg -55 ... +175 C T C=25 C IEC climatic category; DIN IEC 68-1 Rev. 1.0 55/175/56 page 1 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 Parameter Symbol Values Conditions Unit min. typ. max. Thermal characteristics2) Thermal resistance, junction - case R thJC - - 1.1 Thermal resistance, junction ambient, leaded R thJA - - 100 SMD version, device on PCB R thJA minimal footprint - - 75 6 cm2 cooling area3) - - 50 K/W Electrical characteristics, at T j=25 C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D= 1 mA 55 - - Gate threshold voltage V GS(th) V DS=V GS, I D=80 A 2.1 3.0 4.0 Zero gate voltage drain current I DSS V DS=55 V, V GS=0 V, T j=25 C - 0.01 1 - 1 100 V DS=55 V, V GS=0 V, T j=125 C2) V A Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 1 100 nA Drain-source on-state resistance RDS(on) V GS=10 V, I D=30 A, - 11.3 14.7 m Rev. 1.0 page 2 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 Parameter Symbol Values Conditions Unit min. typ. max. - 1485 - - 464 - Dynamic characteristics2) Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 167 - Turn-on delay time t d(on) - 13 - Rise time tr - 28 - Turn-off delay time t d(off) - 32 - Fall time tf - 19 - Gate to source charge Q gs - 7 24 Gate to drain charge Q gd - 18 53 Gate charge total Qg - 41 110 Gate plateau voltage V plateau - 5.1 - V - - 30 A - - 120 V GS=0 V, V DS=25 V, f =1 MHz V DD=30 V, V GS=10 V, I D=30 A, R G=7.5 pF ns Gate Charge Characteristics2) V DD=44 V, I D=30 A, V GS=0 to 10 V nC Reverse Diode Diode continous forward current2) IS Diode pulse current2) I S,pulse Diode forward voltage V SD V GS=0 V, I F=30 A, T j=25 C - 1 1.3 V Reverse recovery time2) t rr V R=30 V, I F=I S, di F/dt =100 A/s - 45 - ns Reverse recovery charge2) Q rr V R=30 V, I F=I S, di F/dt =100 A/s - 78 - nC T C=25 C 1) Current is limited by bondwire; with an R thJC = 1.1 K/W the chip is able to carry 69 A at 25C. For detailed information see Application Note ANPS071E at www.infineon.com/optimos 2) Defined by design. Not subject to production test. 3) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 m thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.0 page 3 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 1 Power dissipation 2 Drain current P tot = f(T C); V GS 6 V I D = f(T C); V GS 10 V 160 35 140 30 120 25 20 I D [A] P tot [W] 100 80 15 60 10 40 5 20 0 0 0 50 100 150 200 0 50 100 T C [C] 150 200 T C [C] 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 C; D = 0 Z thJC = f(t p) parameter: t p parameter: D =t p/T 1000 100 1 s 100 Z thJC [K/W] 10 s I D [A] 100 s 1 ms 0.5 10-1 0.1 0.05 10 0.01 10-2 single pulse 10-3 1 0.1 1 10 100 10-7 10-5 10-4 10-3 10-2 10-1 100 t p [s] V DS [V] Rev. 1.0 10-6 page 4 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 C R DS(on) = (I D); T j = 25 C parameter: V GS parameter: V GS 120 30 10 V 7V 100 6.5 V 25 80 R DS(on) [m] I D [A] 6V 60 5.5 V 20 6V 5.5 V 40 6.5 V 15 20 7V 5V 10 V 0 10 0 1 2 3 4 5 6 7 0 10 20 30 40 50 60 40 50 60 I D [A] V DS [V] 7 Typ. transfer characteristics 8 Typ. Forward transconductance I D = f(V GS); V DS = 6V g fs = f(I D); T j = 25C parameter: T j parameter: g fs 200 70 60 160 50 I D [A] g fs [S] 120 80 40 30 20 40 10 -55 C 25 C 175 C 0 0 2 3 4 5 6 7 0 Rev. 1.0 10 20 30 I D [A] V GS [V] page 5 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 9 Typ. Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(ON) = f(T j) V GS(th) = f(T j); V GS = V DS parameter: I D = 30 A; VGS = 10 V parameter: I D 23 4 21 3.5 19 17 V GS(th) [V] R DS(on) [m] 400 A 3 15 80 A 2.5 13 2 11 1.5 9 7 1 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [C] T j [C] 11 Typ. capacitances 12 Typical forward diode characteristicis C = f(V DS); V GS = 0 V; f = 1 MHz IF = f(VSD) parameter: T j 104 103 102 I F [A] C [pF] Ciss 103 Coss 101 25 C 175 C Crss 102 100 0 5 10 15 20 25 30 V DS [V] Rev. 1.0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 V SD [V] page 6 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 13 Typical avalanche energy 14 Typ. gate charge E AS = f(T j) V GS = f(Q gate); I D = 80 A pulsed parameter: I D 1200 12 1000 10 800 8 11 V V GS [V] E AS [mJ] 44 V 7.5 A 600 400 4 15 A 200 6 2 30 A 0 0 25 50 75 100 125 150 175 0 10 20 T j [C] 30 40 Q gate [nC] 15 Typ. drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS) = f(T j); I D = 1 mA 66 64 V GS Qg 62 V BR(DSS) [V] 60 58 56 54 52 50 Q gate 48 Q gs Q gd 46 -60 -20 20 60 100 140 180 T j [C] Rev. 1.0 page 7 http://store.iiic.cc/ 2006-07-18 IPD30N06S2-15 Published by Infineon Technologies AG Am Campeon 1-12 D-85579 Neubiberg (c) Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies Office (www.infineon.com) Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies Office. Infineon Technologies' components may only be used in life-support devices or systems with the expressed written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.0 page 8 http://store.iiic.cc/ 2006-07-18