CBETO-92
C
B
E
BC
C
SOT-223
E
NPN General Purpose Amplifier
This device is designed as a general purpose amplifier and switch.
The useful dynamic range extends to 100 mA as a switch and to
100 MHz as an amplifier.
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Symbol Parameter Value Units
VCEO Collector-Emi t t er Voltage 40 V
VCBO Collector-Base Voltage 60 V
VEBO Emitter-Base Voltage 6.0 V
ICCollector Current - Continuous 200 mA
TJ, Tst
g
Operating and Storage Junction Temperature Ra nge -55 to +150 °C
2001 Fairchild Semiconductor Corporation
Thermal Characteristics TA = 25°C unless otherwise noted
Symbol Characteristic Max Units
2N3904 *MMBT3904 **PZT3904
PDTotal Device Dissipation
Derate above 25°C625
5.0 350
2.8 1,000
8.0 mW
mW/°C
RθJC Thermal Resistance , Junct i on to Case 83. 3 °C/W
RθJA Therm al Resis tance, J unction to Am bi ent 200 357 125 °C/W
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
**Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.
2N3904 MMBT3904
SOT-23
Mark: 1A
PZT3904
2N3904 / MMBT3904 / PZT3904
2N3904/MMBT3904/PZT3904, Rev A
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Max Units
V(BR)CEO Collector-E mitter Break down
Voltage IC = 1.0 mA, IB = 0 40 V
V(BR)CBO Collector-Base Breakdow n Voltage IC = 10 µA, IE = 0 60 V
V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 6.0 V
IBL Base Cutoff Current VCE = 30 V, V EB = 3V 50 nA
ICEX Collector Cutoff Current VCE = 30 V, VEB = 3V 50 nA
OFF CHARACTERISTICS
ON CHARACTERISTICS*
SMALL SIGNAL CHARACTERISTICS
SWITCHING CHARACTERISTICS
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
NPN (Is=6.734f Xti=3 Eg=1.11 Vaf=74.03 Bf=416.4 Ne=1.259 Ise=6.734 Ikf=66.78m Xtb=1.5 Br=.7371 Nc=2
Isc=0 Ikr=0 Rc=1 Cjc=3.638p Mjc=.3085 Vjc=.75 Fc=.5 Cje=4.493p Mje=.2593 Vje=.75 Tr=239.5n Tf=301.2p
Itf=.4 Vtf=4 Xtf=2 Rb=10)
Spice Model
fTCurrent Gain - Bandwidth Product IC = 10 mA , VCE = 20 V,
f = 100 MHz 300 MHz
Cobo Output Capacitance VCB = 5.0 V , IE = 0,
f = 1.0 MHz 4.0 pF
Cibo Input Capacitance VEB = 0.5 V, I C = 0,
f = 1.0 MHz 8.0 pF
NF Noise Figure IC = 100 µA, VCE = 5.0 V,
RS =1.0kΩ,f=10 Hz to 15.7kHz 5.0 dB
tdDelay Time VCC = 3.0 V, VBE = 0.5 V, 35 ns
t
r
Rise Ti me IC = 10 mA, IB1 = 1.0 mA 35 ns
tsStorage Time VCC = 3.0 V, IC = 10mA 200 ns
tfFall Time IB1 = IB2 = 1.0 mA 50 ns
hFE DC Current Gain IC = 0.1 mA, VCE = 1.0 V
IC = 1.0 mA, VCE = 1.0 V
IC = 10 mA, VCE = 1.0 V
IC = 50 mA, VCE = 1.0 V
IC = 100 mA, VCE = 1.0 V
40
70
100
60
30
300
VCE
(
sat
)
Collector-Emitter Saturation Voltage IC = 10 mA, IB = 1.0 mA
IC = 50 mA, IB = 5.0 mA 0.2
0.3 V
V
VBE
(
sat
)
Base-Emitte r Saturation Voltage IC = 10 mA, IB = 1.0 mA
IC = 50 mA, IB = 5.0 mA 0.65 0.85
0.95 V
V
2N3904 / MMBT3904 / PZT3904
NPN General Purpose Amplifier
(continued)
2N3904 / MMBT3904 / PZT3904
Typical Characteristics
Base-E mi tter ON Voltage vs
Collector C u rren t
0.1 1 10 100
0.2
0.4
0.6
0.8
1
I - COLLECTOR CURRENT (mA)
V - BASE-EMITTER ON VOLTAGE (V)
BE(ON)
C
V = 5V
CE
25 °C
125 °C
- 40 °C
NPN General Purpose Amplifier
(continued)
Base-Emitter Saturation
Voltage vs Collector Current
0.1 1 10 100
0.4
0.6
0.8
1
I - COLLECTOR CURRENT (mA)
V - BASE-EMITTER VOLTAGE (V)
BESAT
C
β = 10
25 °C
125 °C
- 40 °C
Colle ctor-Emitter S aturation
Vol t ag e vs Collect or Cu rrent
0.1 1 10 100
0.05
0.1
0.15
I - COLLECT OR CURRENT (mA)
V - COLLECTOR-EMITTER VOLTAGE (V)
CESAT
25 °C
C
β = 10
125 °C
- 40 °C
Collect or- Cut of f Curre nt
vs Ambient Temperature
25 50 75 100 125 150
0.1
1
10
100
500
T - AMBIENT TEMPERATURE ( C)
I - COLLECTOR CURRENT (nA)
A
V = 30V
CB
CBO
°
Capacitance vs
Reverse Bias Voltage
0.1 1 10 100
1
2
3
4
5
10
REVERSE BIAS VOLTAGE (V)
CAPACITANCE (pF)
Cobo
C
ibo
f = 1.0 MHz
Typi cal Pu lsed C ur r ent Gai n
vs Col lector Cur ren t
0.1 1 10 100
0
100
200
300
400
500
I - COLLECTOR CURRENT (mA)
h - TYPI CA L P ULSED CU RR EN T GA IN
FE
- 40 °C
25 °C
C
V = 5V
CE
125 °C
Power Dissipation vs
A mbient Temperature
0 25 50 75 100 125 150
0
0.25
0.5
0.75
1
TEMPER ATURE ( C)
P - POWER DI SSI PATIO N (W )
D
o
SOT-223
SOT-23
TO-92
Typical Characteristics (continued)
Noise Figure vs Frequency
0.1 1 10 100
0
2
4
6
8
10
12
f - FREQUENCY (kHz)
NF - NOISE FIG URE (dB)
V = 5.0V
CE
I = 100 µA, R = 500 Ω
CS
I = 1.0 m A
R = 200Ω
C
S
I = 50 µA
R = 1.0 kΩ
C
S
I = 0.5 mA
R = 200Ω
C
S
kΩ
Noise Figure vs Source Resistance
0.1 1 10 100
0
2
4
6
8
10
12
R - SOURCE RESISTANCE ( )
NF - NOISE FIGURE (dB)
I = 100 µA
C
I = 1.0 mA
C
S
I = 50 µA
C
I = 5.0 mA
C
θ - DEGREES
0
40
60
80
100
120
140
160
20
180
Current Gain and Phase Angle
vs Frequency
1 10 100 1000
0
5
10
15
20
25
30
35
40
45
50
f - FREQU ENCY (MHz)
h - CURRENT GAI N (dB)
θ
V = 40 V
CE
I = 10 mA
C
hfe
fe
Tur n- On Time vs Collector Curr en t
110100
5
10
100
500
I - COLLECTOR CURRENT (mA)
TIME (nS)
I = I =
B1
C
B2 Ic
10
40V
15V
2.0V
t @V = 0V
CB
d
t @V = 3.0V
CC
r
Rise Time vs Colle ctor Current
1 10 100
5
10
100
500
I - COLLECTOR CURRENT (mA)
t - RISE TIME (ns)
I = I =
B1
C
B2 Ic
10
T = 125°C
T = 25°C
J
V = 40V
CC
r
J
2N3904 / MMBT3904 / PZT3904
NPN General Purpose Amplifier
(continued)
2N3904 / MMBT3904 / PZT3904
NPN General Purpose Amplifier
(continued)
Typical Characteristics (continued)
Storage Time vs Collector Current
1 10 100
5
10
100
500
I - COLL E CTOR CURREN T (mA)
t - STORAGE TIME (ns)
I = I =
B1
C
B2 Ic
10
S
T = 125°C
T = 25°C
J
J
Fall Time vs Collector Current
1 10 100
5
10
100
500
I - COLLECTOR CURRENT (mA)
t - FALL TIME (ns)
I = I =
B1
C
B2 Ic
10
V = 40V
CC
f
T = 125°C
T = 25°C
J
J
Cu rr ent Gain
0.1 1 10
10
100
500
I - COLLECTOR CURRENT (mA)
h - CUR R ENT GAIN
V = 1 0 V
CE
C
fe
f = 1 .0 kHz
T = 25 C
A o
Output Admi tta n c e
0.1 1 10
1
10
100
I - COLLECTOR CURRENT (mA)
h - OUTPU T ADM IT TANCE ( mh os)
V = 10 V
CE
C
oe
f = 1.0 kH z
T = 25 C
A o
µ
Input I m pe danc e
0.1 1 10
0.1
1
10
100
I - CO LL ECT O R CURRE NT (mA)
h - INPU T I MPED ANCE (k )
V = 10 V
CE
C
ie
f = 1.0 kH z
T = 25 C
A o
Ω
Voltage Feedback Ratio
0.1 1 10
1
2
3
4
5
7
10
I - COLLE CTOR CURRENT (mA)
h - VO LTAGE F EED B ACK RATIO (x 1 0 )
V = 10 V
CE
C
re
f = 1.0 kHz
T = 25 C
A o
_4
Test Circuits
10 KΩΩ
ΩΩ
Ω
3.0 V
275 ΩΩ
ΩΩ
Ω
t1
C1 <<
<<
< 4.0 pF
Duty Cycle ==
==
= 2%
Duty Cycle ==
==
= 2%
<<
<<
< 1.0 ns
- 0.5 V
300 ns 10.6 V
10 < <
< <
< t1 <<
<<
< 500 µµ
µµ
µs 10.9 V
- 9.1 V
<<
<<
< 1.0 ns
0
0
10 KΩΩ
ΩΩ
Ω
3.0 V
275 ΩΩ
ΩΩ
Ω
C1 <<
<<
< 4.0 pF
1N916
FIGURE 2: Storage and Fall Time Equivalent Test Circuit
FIGURE 1: Delay and Rise Time Equivalent Test Circuit
2N3904 / MMBT3904 / PZT3904
NPN General Purpose Amplifier
(continued)
TO-92 Tape and Reel Data
March 2001, Rev. B1
©2001 Fairchild Semiconductor Corporation
TO-92 Packaging
Configuration: Figure 1.0
AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Pack Options
2000 units per
EO70 box for
std option
FSCINT Label
530mm x 130m m x
83mm
Inter med iate box
10,000 units maximum
per
intermediate box
for std option
FSCINT Label
114mm x 102m m x 51mm
Immed iate Box
Anti-static
Bubble Sheets
(TO-92) BULK PACKING INFORMATION
EOL
CODE DESCRIPTION LEADCLIP
DIMENSION QUANTITY
J18Z TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX
J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX
NO EOL
CODE TO-92 STANDARD
STRAIGHT FOR: PKG 92, NO LEADCLIP 2.0 K / BOX
BULK OPTION
See Bulk Packing
Information table
375mm x 267m m x 375mm
Inter med iate Box
FSCINT
Label
Customized
Label
333mm x 231m m x 183mm
Inter med iate Box
FSCINT
Label
Customized
Label
TO-92 TNR/AMMO PACKING INFROMATION
Packing Style Quantity EOL code
Reel A 2,000 D26Z
E2,000 D27Z
Ammo M 2,000 D74Z
P2,000 D75Z
U nit weight = 0.22 g m
Reel weight w ith compo nents = 1.04 kg
Ammo w e i g ht w ith components = 1.02 kg
Max q uantity per in te rme d i a te box = 10,000 u n its
F63TNR
Label
5 Ammo boxes per
Inter med iate Box
Customized
Label
327mm x 158m m x 135mm
Immed iate Box
LOT:
CBVK741B019
NSID:
PN2222N
D/C1:
D9842
SPEC REV:
B2
SPEC:
QTY:
10000
QA REV:
FAIRCHILD SEMICONDUCTOR CORPORATI ON
HTB:B
(FSCINT)
F63TNR
Label
Customized
Label
5 Reels per
Inter med iate Box
TAPE and REEL OPTION
See Fig 2.0 for various
Reeling Styles
LOT: CBVK74 1B019
FS ID: PN 2 22N
D/C1: D9842 QTY1: SPEC REV:
SPEC:
QTY: 2000
D/C2: QTY2: CPN: N/F: F (F63TNR)3
F63TNR Label sample
FSCINT Label sample
C
5 EO70 boxes per
intermediate Box
ustomized
Label
94 (NON PROELECTRON
SERIES), 96
L34Z TO-92 STANDARD
STRAIGHT FOR: PKG 94 NO LEADCLIP 2.0 K / BOX
(PROELECTRON SERIES
BCXXX, BFXXX, BSRXXX),
97, 98
TO-92 Tape and Reel Data, continued
September 1999, Rev. B
TO-92 Reeling Style
Configuration: Figure 2.0
Style “A”, D26Z, D70 Z (s/h)
Machine Op tion “A ” (H)
Style “E ”, D2 7Z, D 71Z (s/ h)
Machine Option “E” (J)
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE
D75Z (P)
FIRST WIRE OFF IS COLLECTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
ORDER STYLE
D74Z (M)
TO-92 Radial Ammo Packaging
Configuration: Figure 3.0
FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP
ITEM DESCRIPT I ON
Base of Package to Lead Bend
Com p on en t Heig ht
Lead Clinch Height
Com p on en t Ba s e He ig ht
Com p on en t Al ig nm e nt ( sid e/s id e )
Com p on en t Al ig nm e nt ( front/b ac k )
Com p on en t Pitc h
Feed Hole Pitch
Hole Center to First Lead
Hole Center to Component Center
Lead Spread
Lead Thickness
Cut Lead Length
Taped Lead Length
Taped Lead Thickness
Carrier Tape Thickness
Carrier Tape Width
Hold - down Tape Width
Hold - down Tape position
Feed Hole Position
Sprocket Hole Diameter
Lead Spring Out
SYMBOL
b
Ha
HO
H1
Pd
Hd
P
PO
P1
P2
F1/F2
d
L
L1
t
t1
W
WO
W1
W2
DO
S
DIMENSION
0. 09 8 (m ax )
0. 92 8 (+ /- 0.025)
0. 63 0 (+ /- 0.020)
0. 74 8 (+ /- 0.020)
0. 04 0 (m ax )
0. 03 1 (m ax )
0. 50 0 (+ /- 0.020)
0. 50 0 (+ /- 0.008)
0. 15 0 (+ 0 .00 9, -0.0 10 )
0. 24 7 (+ /- 0.007)
0. 10 4 (+ /- 0 . 01 0)
0. 01 8 (+ 0 .00 2, -0.0 03 )
0. 42 9 (m ax )
0. 20 9 (+ 0 .05 1, -0.0 52 )
0. 03 2 (+ /- 0.006)
0. 02 1 (+ /- 0.006)
0. 70 8 (+ 0 .02 0, -0.0 19 )
0. 23 6 (+ /- 0.012)
0. 03 5 (m ax )
0. 36 0 (+ /- 0.025)
0. 15 7 (+ 0 .00 8, -0.0 07 )
0. 00 4 (m ax )
Note : All dim ensions are in inches.
ITEM DESCRIPT I ON SYSMBOL MINIMUM MAXIMUM
Ree l Di am e ter D1 13. 9 75 14.025
Arb or Hol e Di am et er (S ta nd ard) D2 1.16 0 1.200
(Small Hole) D2 0.650 0.700
Core Diameter D3 3.100 3.300
Hub Recess Inner Diameter D4 2.700 3.100
Hub Recess Depth W1 0.370 0. 570
Flange to Flange Inner Width W2 1.630 1.690
Hub to Hub Center Width W3 2.090
Note: All dimensions are inches
TO-92 Tape and Reel Taping
Dimension Configuration: Figure 4.0
Ha
H1 HO
PO
P2
P1 F1
DO
P Pd
b
d
L1
LS
WO W2
W
t
t1
Hd
W1
TO-92 Reel
Configuration: Figure 5.0
User D ire c tion of Feed
SENSITIVE DEVI CES
ELECTROSTATIC
D1
D3
Customiz ed Label
W2
W1 W3
F63 TNR Label
D4
D2
TO-92 Tape and Reel Data, continued
July 1999, Rev. A
TO-92 (FS PKG Code 92, 94, 96)
TO-92 Package Dimensions
January 2000, Rev. B
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.1977
©2000 Fairchild Semiconductor International
SOT-23 Packaging
Configu rat ion: Figure 1.0
Components Leader Tape
500mm minimum or
125 emp ty pockets
Tr ailer Tape
300mm minimum or
75 empty pocke t s
SOT-23 Tape Leader and Trailer
Configuration: F igure 2.0
Cover Tape
Carrier Tape
Note/Comments
Packaging Option
SOT-23 Packaging Information
Standard
(no flow code) D87Z
Packaging type
Reel Si ze
TNR
7" Dia
TNR
13"
Qty per Reel/Tube/Bag 3,000 10,000
Bo x Dimen si on (m m) 187x107x183 343x343x64
Max qt y per B o x 24,000 30,000
Weight per unit (gm) 0.0082 0.0082
Weight per Reel (kg) 0.1175 0.4006
Human readable
Label
Human Readable Label
Human Read able Label sample
343mm x 342mm x 64mm
Intermediate box for L87Z Opti on
187mm x 107mm x 183mm
Intermediate Box for Standard Option
SOT-23 Unit Orientation
3P 3P 3P 3P
Human Readable
Label
Customized Label
Embossed
Carrier Tape
Antistatic Cover Tape
Packaging Description:
SOT-23
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Acti vated
Adhesive in nature) primaril y composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 uni ts per 7" or 177cm di ameter reel. The reels are
dark blue in color and is made of polystyrene plastic (anti-
static coated). Other option comes in 10,000 units per 13"
or 330cm diameter r eel. Thi s and some other opti ons are
described in the Packaging Information table.
These full reels are indiv idually labeled and pl aced insi de
a standard intermediate made of recyclable corrugated
brown paper wi th a Fai rchil d l ogo pri nt i ng. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes i n different si zes depending on the number of parts
shipped.
parts are shipped in tape. The carrier tape is
SOT-23 Tape and Reel Data
September 1999, Rev . C
©2000 Fairchild Semiconductor International
Dimensions are in millimeter
Pkg type
A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-23
(8mm)
3.15
+/-0.10 2.77
+/-0.10 8.0
+/-0.3 1.55
+/-0.05 1.125
+/-0.125 1.75
+/-0.10 6.25
min 3.50
+/-0.05 4.0
+/-0.1 4.0
+/-0.1 1.30
+/-0.10 0.228
+/-0.013 5.2
+/-0.3 0.06
+/-0.02
Dimensions are in inches and millimeters
Tape Size Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
8mm 7" Dia 7.00
177.8 0.059
1.5 512 +0.020/-0.008
13 +0.5/-0.2 0.795
20.2 2.165
55 0.331 +0.059/-0.000
8.4 +1.5/0 0.567
14.4 0.311 – 0.429
7.9 – 10.9
8m m 13" Dia 13.00
330 0.059
1.5 512 +0.020/-0.008
13 +0.5/-0.2 0.795
20.2 4.00
100 0.331 +0.059/-0.000
8.4 +1.5/0 0.567
14.4 0.311 – 0.429
7.9 – 10.9
See detail AA
Dim A
max
13" Diameter Option
7" Diameter Option
Dim A
Max
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
component
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
SOT-23 Embossed Carrier Tape
Confi guration: Figure 3.0
SOT-23 Reel Configuration: Figure 4.0
P1 A0
D1
FW
E1
E2
Tc
Wc
K0
T
B0
D0P0 P2
SOT-23 Tape and Reel Data, continued
September 1999, Rev . C
SOT-23 (FS PKG Code 49)
SOT-23 Package Dimensions
September 1998, Rev . A1
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Par t Weight per unit (gram): 0.0082
©2000 Fairchild Semiconductor International
SOT-223 Packaging
Configuration: Figure 1.0
Components Leader Tape
500mm min imum or
62 empty poc kets
Tr aile r Tape
300mm min imum or
38 empty poc kets
SOT-223 Tape Leader and Trailer
Configuration: Figure 2.0
Cover Tape
Carrier Tape
Note/Comments
Packaging Option
SOT-223 Packaging Information
Standard
(no flow code) D84Z
Packaging type
Reel Size
TNR
13" Dia
TNR
7" Dia
Qty per Reel/Tube/Bag 2,500 500
Box Dimension (mm) 343x64x343 184x187x47
Max qty per Box 5,000 1,000
Weight per unit (gm) 0.1246 0.1246
Weight per Reel (kg) 0.7250 0.1532
SOT-223 Unit Orientat io n
F
852
014
F
852
014
F
852
014
F
852
014
F63TNR Label
343mm x 342mm x 64mm
Intermediate box for Standard
184mm x 184mm x 47mm
Pizza Box for D84Z O p tion
F63TNR Label
LOT: CBVK741B019
FSID: PN2222A
D/C1: D9842 QTY1: SPEC REV:
SPEC:
QTY: 3000
D/C2: QTY2: CPN: N/F: F (F63TNR)3
F63TNR Labe l sample
F63TNR Label
Antistat ic Cover Tape
Customized Label
Static Dissipative
Embossed Carrier Tape
Packaging Description:
SOT-223 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
2,5 00 uni t s pe r 13" or 33 0c m d ia met er re el . The re el s are
dark blue in color and is made of polystyrene plastic (anti-
static coated). Other option comes in 500 units per 7" or
177cm diameter reel. This and some other options are
further described in the Packaging Inform ation table.
These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains two reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
co me s in di ffe re nt s iz es depe nd ing on th e nu mbe r of pa rts
shipped.
SOT-223 Tape and Reel Data
September 1999, Rev . B
©2000 Fairchild Semiconductor International
Dimensions are in millimeter
Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-223
(12mm) 6.83
+/-0.10 7.42
+/-0.10 12.0
+/-0.3 1.55
+/-0.05 1.50
+/-0.10 1.75
+/-0.10 10.25
min 5.50
+/-0.05 8.0
+/-0.1 4.0
+/-0.1 1.88
+/-0.10
0.292
+/-
0.0130
9.5
+/-0.025 0.06
+/-0.02
P1
A0 D1
P0
F
W
E1
D0
E2
B0
Tc
Wc
K0
T
Dimensions are in inches and millimeters
Tape Size Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
12m m 7" Dia 7.00
177.8 0.059
1.5 512 +0.0 20/-0.008
13 +0.5/-0.2 0.795
20.2 5.906
150 0.488 +0.078/-0.000
12.4 + 2/0 0.724
18.4 0.469 – 0.606
11.9 – 15.4
12m m 13" Dia 13.00
330 0.059
1.5 512 +0.0 20/-0.008
13 +0.5/-0.2 0.795
20.2 7.00
178 0.488 +0.078/-0.000
12.4 + 2/0 0.724
18.4 0.469 – 0.606
11.9 – 15.4
See detail AA
Dim A
max
13" Diameter Option
7" Diamet er Option
Dim A
Max
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
component
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
SOT-223 Embossed Carrier Tape
Configuration: Figure 3.0
SOT-223 Reel Configur at io n: Figure 4.0
SOT-223 Tape and Reel Data, continued
July 1999, Rev . B
SOT-223 (FS PKG Code 47)
SOT-223 Package Dimensions
1 : 1
Scale 1:1 on letter size paper
Part Weight per unit (gram): 0.1246
September 1999, Rev . C
©2000 Fairchild Semiconductor International
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF F AIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART ST ART™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Rev . G
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
FAST
SyncFET™
TinyLogic™
UHC™
VCX™