SHANGHAI SUNRISE ELECTRONICS CO., LTD.
VOLTAGE: 50 TO 1000V CURRENT: 1.0A
FEATURES
• For surface mount application
• Reliable low cost construction utilizing
molded plastic technique
• Surge overload rating: 50 A peak
• High temperature soldering guaranteed:
250oC/10sec/ at terminals
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: UL-94 Class V-O recognized flame
retardant epoxy
• Polarity: Polarity symbol marked on body
• Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SYMBOL DF
005S DF
01S DF
02S DF
04S DF
06S DF
08S DF
10S UNITS
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
(Ta=40oC)
Peak Forward Surge Current (8.3ms single
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
(at forward current 1.0A)
Maximum DC Reverse Current Ta=25oCµA
(at rated DC blocking voltage) Ta=125oCµA
Typical Junction Capacitance (Note 1) CJpF
Storage and Operating Junction Temperature TSTG,TJoC
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc http://www.sse-diode.com
A
BRIDGE RECTIFIER
SINGLE PHASE GLASS
IFSM 50
VF1.1 V
25
DF005S THRU DF10S
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,
derate current by 20%)
RATINGS
IF(AV) 1.0 A
PASSIVATED SURFACE MOUNT
-55 to +150
IR10.0
500
DF-S
TECHNICAL
SPECIFICATION
Dimensions in inches and (millimeters)
