G6K-2F-RFDC3 - Omron Electronics

High Frequency Relay G6K--RF

586

High Frequency Relay

G6K--RF

Compact High Frequency Relays

with 2 Form C (DPDT) Contacts

HHandles 1 A, 30 VDC discrete load and 1 W

at 1 GHz high frequency load.

HSingle-coil latching models available.

HGullwing surface mount terminals.

HAmbient temperature range:

-- 4 0 °to 70°C.

HLow coil power consumption: 100 mW.

HIdeal for instrumentation and high-speed

LAN network equipment.

HRoHS Compliant.

Ordering Information

Contact form Max. load Coil voltage Non-latching part number Single-coil latching part number

DPDT

(

)

1 A at 30 VDC,

3VDC G6K-2F-RF DC3 G6KU-2F-RF DC3

(2 Form C)

0.3 A at 125 VAC 4.5 VDC G6K-2F-RF DC4.5 G6KU-2F-RF DC4.5

5VDC G6K-2F-RF DC5 G6KU-2F-RF DC5

6VDC G6K-2F-RF DC6 G6KU-2F-RF DC6

9VDC G6K-2F-RF DC9 G6KU-2F-RF DC9

12 VDC G6K-2F-RF DC12 G6KU-2F-RF DC12

24 VDC G6K-2F-RF DC24 G6KU-2F-RF DC24

Specifications

JCONTACT DATA

Contact form DPDT (2 Form C)

Contact material Au alloy on Ag base

Contact resistance 100 mΩmax.

Contact rating High frequency 1 GHz, 1 W (See note)

Resistive load 0.3A,125VAC;1A,30VDC

Operate (set) time 3msmax.

Release (reset) time 3msmax.

Max. switching voltage 60 VDC, 125 VAC

Max. switching current 1A

Max. switching capacity 37.5 VA (AC); 30 W (DC)

Note: This value is for a load with V.S.W.R. ≤1.2

587

High Frequency Relay G6K--RF

JCOIL DATA

Rated voltage Rated current Coil resistance Must operate

voltage

Must release

voltage

Rated power

consumption

Maximum voltage

3VDC 33.0 mA 91 Ω80% max. of

10% min. of

Approx. 100 mW 150% of rated

4.5 VDC 23.2 mA 194 Ωrated voltage rated voltage

voltage

5VDC 21.1 mA 237 Ω

6VDC 17.6 mA 341 Ω

9VDC 11.3 mA 795 Ω

12 VDC 9.1 mA 1315 Ω

24 VDC 4.6 mA 5220 Ω

Note: 1. The value of the above list is measured at ambient temeprature 23°C with the tolerance of rated current and coil resistance ±10%.

2. The maximum voltage is the highest voltage that can be aplied on the relay coil and it is on the ambient temperature under the

operating conditions.

3. Other items are measured at 23°C.

JHIGH FREQUENCY CHARACTERISTICS

Isolation 20 dB min. at 1 GHz between continuous contact

30 dB min. at 1 GHz between non-continuous contact

Insertion loss 0.2 dB max. at 1 GHz

V.S.W.R. return loss 1.2 max. at 1 GHz

Maximum transmission capacity 3W

Maximum switching capacity 1W

Note: Measured with 50 Ωand V.S.W.R. ≤1.2

JCHARACTERISTICS

Dielectric strength Between open contacts 750 VAC, 50/60 Hz for 1 minute

Between contact sets 750 VAC, 50/60 Hz for 1 minute

Between contacts and coil 750 VAC, 50/60 Hz for 1 minute

Contacts and ground 500 VAC, 50/60 Hz for 1 minute

Insulation resistance 1000 MΩmin. at 500 VDC

Operation (set) time At 20°C3msmax.

Release (reset) time At 20°C3msmax.

Shock resistance Malfunction 750 m/s2(approx. 75G)

Destruction 1000 m/s2(approx. 100G)

Vibration resistance Malfunction 0.01 ms min., 10 Hz to 55 Hz (3.3 mm double amplitude)

Destruction 2 hours, 55 Hz to 500 Hz (5 mm double amplitude)

Mechanical life expectancy 50 million operations min.

Electrical life expectancy Resistive load 100,000 operations min. (0.3 A, 125 VAC or 1 A, 30 VDC)

Ambient temperature -- 4 0 °to 70°Cwithnoicing

Ambient humidity 5% to 85% RH

Weight Approx. 0.95 g

588 High Frequency Relay G6K--RF

Dimensions

Unit: mm (inch)

JRELAYS

Terminal arrangement/

Internal connections

(top view)

Mounting pads

(top view)

G6K-2F-RF

12.8 (0.504)

10.3

0.6

5.4

(0.212)

0.5

1.35

3.2

5.4

7.6

Lot No.

6.9

(0.272)

0.3

7.8

Orientation

mark

0.5

2.5

1.8

2.5

1.95

7.6

5.4

3.2

Note: 1. Mounting pads tolerance: ±0.1 mm

2. Tolerance for other parts: ±0.3 mm

3. Coplanarity: Max. 0.15

0.8

1.35

11.5

Terminal arrangement

Internal connections

(top view)

Mounting pads

(top view)

12.8 (0.504)

10.3

0.6

5.4

(0.212)

0.5

1.35

3.2

5.4

7.6

Lot No.

6.9

(0.272)

0.3

7.8

Orientation

mark

0.5

2.5

1.8

2.5

1.95

7.6

5.4

3.2

Note: 1. Mounting pads tolerance: ±0.1 mm

2. Tolerance for other parts: ±0.3 mm

3. Coplanarity: Max. 0.15

0.8

1.35

11.5

U-2F-RF

-- +

+--

Precautions

JSOLDERING CONDITIONS

Do not unpack the relay until ready to mount it.

Solder type: JIS Z3282, H63A or equivalent

The temperature profile for infrared reflow soldering (IRS) was

measured on the surface of the PCB.

The recommended thickness of solder paste is from 150 µmto

200 µm.

Time (seconds)

90--120

20--30

Preheating

Soldering

220°--245°

180°--200°

150°

Temperature °C

Coating

The relay mounted on the PCB may be coated or washed, but do

not apply silicone coating or detergent containing silicone, other

wise, the silicone coating or detergent may remain on the surface

of the relay.

589

High Frequency Relay G6K--RF

JMOUNTING

PCB Mounting

If two or more relays are closely mounted with the long sides of

the relays facing each other and the soldering is performed with

infrared radiation, the solder may not be properly exposed to the

infrared rays. Be sure to keep the proper distance between

adjacent relays as shown below to insure formation of good

solder joints.

Two or more relays may be mounted as closely as desired with

the short sides of the relays facing each other.

Claw Securing Force During Automatic Mounting

During automatic insertion of relays, make sure to set the

securing force of each claw to the following so that the relay’s

characteristics will be maintained.

Latching Relay Mounting

Make sure that the vibration or shock that is generated from other

devices, such as relays in operation, on the same panel and

imposed on the latching relay does not exceed the rated value,

otherwise the latching relay that has been set may be reset or

vice versa. The latching relay is reset before shipping. If

excessive vibration or shock is imposed, however, the latching

relay may be set accidentally. Be sure to apply a reset signal

before use.

JOPERATING, STORAGE ENVIRONMENT

1. Use in locations where the relay is not exposed to corrosive

gas such as hydrogen sulfide gas or salty air.

2. Use in locations where no visible dust exists.

3. Use in locations where the product is not exposed to direct

sunlight, rain or snow.

4. Do not apply force to the product which may result in

deformation or change in quality of the product.

5. The relay is sealed to withstand 90°C for 1 minute in

fluorocarbon liquid.

If the relay is stored for a long time in an adverse environment

with high temperature, high humidity, organic or sulfide gases,

sulfide or oxide films will form on the contact surfaces. These

films may result in unstable contact, contact problems, or function

problems. Therefore, operate, store or transport the product

under specified environmental conditions.

JMAXIMUM ALLOWABLE VOLTAGE

The maximum allowable voltage of the coil can be obtained from

the coil temperature increase and the heat--resisting temperature

of coil insulating sheath material. (Exceeding the heat-resisting

temperature may result in burning or short-circuiting.) The

maximum allowable voltage also involves important restrictions

which include the following:

•Must not cause thermal changes in or deterioration of the

insulating material.

•Must not cause damage to other control devices.

•Must not cause any harmful effect on people.

•Must not cause fire.

Therefore, be sure to use the maximum allowable voltage as

specified in the catalog.

As a rule, the rated voltage must be applied to the coil. A voltage

exceeding the rated value, however can be applied to the coil

provided that the voltage is less than or equal to the maximum

allowable voltage. It must be noted that continuous voltage

application to the coil will cause a coil temperature increase

which may affect characteristics such as electrical life and coil

insulation.

Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Ter ms") are deemed

par t of all quotations, acknowledgments, invoices, purchase orders and other

documents, whether electronic or in wr iting, relating to the sale of products or

services (collectively, the "Products") by Omron Electronic Components LLC

("Seller"). Seller hereby objects to any terms or conditions proposed in

Buyer's purchase order or other documents which are inconsistent with, or in

addition to, these Terms.

2. Prices; Payment. All prices stated are current, subject to change without

notice by Seller. Buyer agrees to pay the pr ice in effect at time of shipment.

Payments for Products received are due net 30 days unless otherwise stated

in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of

invoices sent to Buyer after deducting transportation charges, taxes and

duties, and will be allowed only if (i) the invoice is paid according to Seller's

payment terms and (ii) Buyer has no past due amounts owing to Seller.

4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-

lars, Buyer shall make remittance to Seller at the then current exchange rate

most fa vorable to Seller and which is available on the due date; provided that if

remittance is not made when due, Buyer will conver t the amount to U.S. dol-

lars at the then current exchange rate most favorable to Seller available during

the period between the due date and the date remittance is actually made.

5. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Products.

6. Taxes. All taxes, duties and other gover nmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Seller or required to be collected directly or

indirectly by Seller for the manufacture, production, sale, delivery, importation,

consumption or use of the Products sold hereunder (including customs duties

and sales, excise, use, turnover and license taxes) shall be charged to and

remitted by Buyer to Seller.

7. Financial. If the financial position of Buyer at an y time becomes unsatisf actory

to Seller, Seller reserves the right to stop shipments or require satisfactory

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related ag reement, S eller may (without liability

and in addition to other remedies) cancel any unshipped portion of Products

sold hereunder and stop any Products in transit until Buyer pays all amounts,

including amounts payable hereunder, whether or not then due, which are

owing to it by Buyer. Buyer shall in any event remain liable for all unpaid

accounts.

8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Seller fully against all costs or expenses arising in

connection therewith.

9. Force Majeure. Seller shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:

1. Shipments shall be by a carrier selected by Seller;

2. Such carrier shall act as the agent of Buyer and delivery to such carrier

shall constitute delivery to Buyer;

3. All sales and shipments of Products shall be FOB shipping point (unless

otherwise stated in writing by Seller), at which point title to and all risk of

loss of the Products shall pass from Seller to Buyer, provided that Seller

shall retain a security interest in the Products until the f ull purchase price is

paid by Buyer;

4. Delivery and shipping dates are estimates only.

5. Seller will package Products as it deems proper for protection against

normal handling and extra charges apply to special conditions.

11. Claims. Any claim by Buyer against Seller for shortage or damage to the

Products occurring before delivery to the carr ier must be presented in writing

to Seller within 30 days of receipt of shipment and include the original trans-

portation bill signed by the carrier noting that the carrier received the Products

from Seller in the condition claimed.

12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that th

Products will be free from def ects in ma terials and workmanship for a period

twelve months from the date of sale by Seller (or such other period expresse

in writing by Seller). Seller disclaims all other warranties, express or implie

(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATIO

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABI

L-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT TH

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THE

INTENDED USE. Seller further disclaims all warranties and responsibility

any type f or cl aim s or expenses based on infringement by the Products or ot

erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole ob

li-

gation hereunder shall be to replace (in the for m or iginally shipped with Buy

responsible for labor charges for removal or replacement thereof) the no

complying Product or, at Seller's election, to repay or credit Buyer an amou

equal to the purchase price of the Product; provided that in no event sh

all

Seller be responsible for warranty, repair, indemnity or any other claims

expenses regarding the Products unless Seller's analysis confirms that th

Products were properly handled, stored, installed and maintained and not su

ject to contamination, abuse, misuse or inappropriate modification. Retur n

any Products by Buyer must be approved in writing by Seller before shipmen

Seller shall not be liable for the suitability or unsuitability or the results from th

use of Products in combination with any electrical or electronic component

circuits, system assemblies, or any other materials or substances or enviro

ments. Any advice, recommendations or information given orally or in writin

are not to be construed as an amendment or addition to the above warranty.

13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIA

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS O

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON

NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED

CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Fur ther,

no event shall liability of Seller exceed the individual price of the Product o

which liability is asserted.

14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates an

its employees from and against all liabilities, losses, claims, costs an

expenses (including attorney's fees and expenses) related to any claim, inve

tigation, litigation or proceeding (whether or not Seller is a par ty) which arise

or is alleged to arise from Buyer's acts or omissions under these Terms or

any w ay with respect to the Products . Without li miting the foregoing, Buyer (

its own expense) shall indemnify and hol d harmless Seller and defend or sett

any action brought against Seller to the extent that it is based on a claim th

any Product made to Buyer specifications infringed intellectual property r igh

of another party.

15. Property; Confidentiality. The intellectual property embodied in the Products

the exclusive property of Seller and its affiliates and Buyer shall not attempt

duplicate it in any way without the written permission of Seller. Notwithstan

ing any charges to Buyer for engineering or tooling, all engineering and toolin

shall remain the e xclusive property of Seller . Al l information and materials su

plied by Seller to Buyer relating to the Products are confidential and prop

ri-

etary, and Buyer shall limit distribution thereof to its trusted employees an

strictly prevent disclosure to any third party.

16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any rig

and no course of dealing between Buyer and Seller shall operate as a waiv

of rights by Seller. (b) Assignment. Buyer may not assign its rights hereund

without Seller's written consent. (c) Law. These Terms are governed by I

lli-

nois law (without regard to conflict of law principles). Federal and state cour

in Illinois shall have exclusive jurisdiction for any dispute hereunde

(d) Amendment. These Terms constitute the entire agreement between Buy

and Seller relating to the Products, and no provision may be changed

waiv ed unless in writing signed b y the parties. (e) Se v erabili ty. If any provisio

hereof is rendered ineffective or invalid, such provision shall not invalidate an

other provision. (f) Setoff. Buyer shall have no right to set off any amoun

against the amount owing in respect of this invoice.. (g) Definitions. As use

herein, "including" means "including without limitation".

Certain Precautions on Specifications and Use

1. Suitability for Use. Seller shall not be responsible for conformity with any stan-

dards, codes or regulations which apply to the combination of the Product in

Buyer's application or use of the Product. At Buyer's request, Seller will pro-

vide applicable th ird party certification documents identifying r atings and li mita-

tions of use which apply to the Product. This information by itself is not

sufficient f or a complete determination of the suitability of the Product i n combi-

nation with the end product, machine, system, or other application or use.

Buyer shall be solely responsible for determining appropriateness of the partic-

ular Product with respect to Buyer's application, product or system. Buyer

shall take application responsibility in all cases but the following is a non-

exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii)Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to

separate industry or government regulations.

(iii)Use in consumer products or any use in significant quantities.

(iv)Systems, machines and equipment that could present a risk to life or

property. Please know and obse rve all prohibi tio ns of use appli ca ble to this

product.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DES IGNED TO ADDRESS THE RISKS, AND THAT

THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE

INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Seller shall not be responsible for the user's

programming of a programmable product, or any consequence thereof.

3. Performance Data. Performance data giv en i n this pub lica tion is pro vided a

s a

guide for the user in determining suitability and does not constitute a warran

ty.

It may represen t the re sult of Sel ler's test co nditions, and the users must cor

re-

late it to actual application requirements. Actual performance is subject

Seller's Warranty and Limitations of Liability.

4. Change in Specifications. Product specifications and accessories may

changed at any time based on improvements and other reasons. It is our pra

tice to change part numbers when published ratings or features are change

or when significant construction changes are made. However, some specific

tions of the Product may be changed without any notice. When in doubt, sp

cial part numbers may be assigned to fix or estab lish k e y specifications f or y o

application. Please consult with your Seller representative at any time to co

firm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefu

lly

checked and is believed to be accurate; however, no responsibility is assum

for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance. Where indicated, our products currently comply, to the b

est

of our knowledge as of the date of thi s publication, with the requirements of t

European Union's Directive on the Restriction of certain Hazardous Su

stances ("RoHS"), although the requirements of RoHS do not take effect u

ntil

July 2006. These requirements may be subject to change. Please consult o

website for current information.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

Canada - http://www.omron.ca

Cat. No. JB301-E3-01 Printed in USA

OMRON CANADA, INC.

885 Milner Avenue

Toronto, Ontario M1B 5V8

416-286-6465

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

3/05 Specifications subject to change without notice

Complete “Terms and Condition s of Sale” for product purchase and use are on Omron’s website

at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.