High Frequency Relay G6K--RF Compact High Frequency Relays with 2 Form C (DPDT) Contacts H Handles 1 A, 30 VDC discrete load and 1 W H H H H H H at 1 GHz high frequency load. Single-coil latching models available. Gullwing surface mount terminals. Ambient temperature range: --40 to 70C. Low coil power consumption: 100 mW. Ideal for instrumentation and high-speed LAN network equipment. RoHS Compliant. Ordering Information Contact form Max. load Coil voltage Non-latching part number Single-coil latching part number DPDT (2 Form F C) 3 VDC G6K-2F-RF DC3 G6KU-2F-RF DC3 4.5 VDC G6K-2F-RF DC4.5 G6KU-2F-RF DC4.5 5 VDC G6K-2F-RF DC5 G6KU-2F-RF DC5 6 VDC G6K-2F-RF DC6 G6KU-2F-RF DC6 9 VDC G6K-2F-RF DC9 G6KU-2F-RF DC9 12 VDC G6K-2F-RF DC12 G6KU-2F-RF DC12 24 VDC G6K-2F-RF DC24 G6KU-2F-RF DC24 1 A at 30 VDC,, 0 3 A at 125 VAC 0.3 Specifications J CONTACT DATA Contact form DPDT (2 Form C) Contact material Au alloy on Ag base Contact resistance Contact rating g 100 m max. High frequency 1 GHz, 1 W (See note) Resistive load 0.3 A, 125 VAC; 1 A, 30 VDC Operate (set) time 3 ms max. Release (reset) time 3 ms max. Max. switching voltage 60 VDC, 125 VAC Max. switching current 1A Max. switching capacity 37.5 VA (AC); 30 W (DC) Note: This value is for a load with V.S.W.R. 1.2 586 High Frequency Relay G6K--RF J COIL DATA Rated voltage Rated current Coil resistance Must operate voltage Must release voltage Rated power consumption Maximum voltage 3 VDC 33.0 mA 91 23.2 mA 194 10% min. of rated d voltage l Approx. pp 100 mW 4.5 VDC 80% max. of rated d voltage l 150% of rated voltage l 5 VDC 21.1 mA 237 6 VDC 17.6 mA 341 9 VDC 11.3 mA 795 12 VDC 9.1 mA 1315 24 VDC 4.6 mA 5220 Note: 1. The value of the above list is measured at ambient temeprature 23C with the tolerance of rated current and coil resistance 10%. 2. The maximum voltage is the highest voltage that can be aplied on the relay coil and it is on the ambient temperature under the operating conditions. 3. Other items are measured at 23C. J HIGH FREQUENCY CHARACTERISTICS Isolation 20 dB min. at 1 GHz between continuous contact 30 dB min. at 1 GHz between non-continuous contact Insertion loss 0.2 dB max. at 1 GHz V.S.W.R. return loss 1.2 max. at 1 GHz Maximum transmission capacity 3W Maximum switching capacity 1W Note: Measured with 50 and V.S.W.R. 1.2 J CHARACTERISTICS Dielectric strength g Between open contacts 750 VAC, 50/60 Hz for 1 minute Between contact sets 750 VAC, 50/60 Hz for 1 minute Between contacts and coil 750 VAC, 50/60 Hz for 1 minute Contacts and ground 500 VAC, 50/60 Hz for 1 minute Insulation resistance 1000 M min. at 500 VDC Operation (set) time At 20C 3 ms max. Release (reset) time At 20C 3 ms max. Shock resistance Malfunction 750 m/s2 (approx. 75G) Destruction 1000 m/s2 (approx. 100G) Malfunction 0.01 ms min., 10 Hz to 55 Hz (3.3 mm double amplitude) Destruction 2 hours, 55 Hz to 500 Hz (5 mm double amplitude) Vibration resistance Mechanical life expectancy Electrical life expectancy 50 million operations min. Resistive load 100,000 operations min. (0.3 A, 125 VAC or 1 A, 30 VDC) Ambient temperature --40 to 70C with no icing Ambient humidity 5% to 85% RH Weight Approx. 0.95 g High Frequency Relay G6K--RF 587 Dimensions Unit: mm (inch) J RELAYS Terminal arrangement/ Internal connections (top view) G6K-2F-RF 6.9 (0.272) 12.8 (0.504) 10.3 0.3 0.6 5.4 (0.212) Mounting pads (top view) Orientation mark 1.8 7.6 5.4 3.2 0.5 Lot No. 0.5 1.35 3.2 5.4 7.6 7.8 7 2.5 2.5 Note: 1. Mounting pads tolerance: 0.1 mm 2. Tolerance for other parts: 0.3 mm 3. Coplanarity: Max. 0.15 G6KU-2F-RF 6.9 (0.272) 12.8 (0.504) 10.3 0.3 Orientation mark 0.6 5.4 (0.212) Terminal arrangement/ Internal connections (top view) Lot No. 0.5 1.35 3.2 5.4 7.6 7.8 11.5 Mounting pads (top view) 1.8 -- + + -- 0.8 1.35 1.95 7.6 5.4 3.2 0.5 7 2.5 2.5 Note: 1. Mounting pads tolerance: 0.1 mm 2. Tolerance for other parts: 0.3 mm 3. Coplanarity: Max. 0.15 1.95 0.8 1.35 11.5 Precautions Coating J SOLDERING CONDITIONS Do not unpack the relay until ready to mount it. Solder type: JIS Z3282, H63A or equivalent The temperature profile for infrared reflow soldering (IRS) was measured on the surface of the PCB. The recommended thickness of solder paste is from 150 m to 200 m. Soldering 220--245 Temperature C 180--200 Preheating 150 90--120 Time (seconds) 588 High Frequency Relay 20--30 G6K--RF The relay mounted on the PCB may be coated or washed, but do not apply silicone coating or detergent containing silicone, other wise, the silicone coating or detergent may remain on the surface of the relay. J MOUNTING PCB Mounting If two or more relays are closely mounted with the long sides of the relays facing each other and the soldering is performed with infrared radiation, the solder may not be properly exposed to the infrared rays. Be sure to keep the proper distance between adjacent relays as shown below to insure formation of good solder joints. Two or more relays may be mounted as closely as desired with the short sides of the relays facing each other. Claw Securing Force During Automatic Mounting During automatic insertion of relays, make sure to set the securing force of each claw to the following so that the relay's characteristics will be maintained. J OPERATING, STORAGE ENVIRONMENT 1. Use in locations where the relay is not exposed to corrosive gas such as hydrogen sulfide gas or salty air. 2. Use in locations where no visible dust exists. 3. Use in locations where the product is not exposed to direct sunlight, rain or snow. 4. Do not apply force to the product which may result in deformation or change in quality of the product. 5. The relay is sealed to withstand 90C for 1 minute in fluorocarbon liquid. If the relay is stored for a long time in an adverse environment with high temperature, high humidity, organic or sulfide gases, sulfide or oxide films will form on the contact surfaces. These films may result in unstable contact, contact problems, or function problems. Therefore, operate, store or transport the product under specified environmental conditions. J MAXIMUM ALLOWABLE VOLTAGE The maximum allowable voltage of the coil can be obtained from the coil temperature increase and the heat--resisting temperature of coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maximum allowable voltage also involves important restrictions which include the following: * Must not cause thermal changes in or deterioration of the insulating material. * Must not cause damage to other control devices. * Must not cause any harmful effect on people. * Must not cause fire. Latching Relay Mounting Make sure that the vibration or shock that is generated from other devices, such as relays in operation, on the same panel and imposed on the latching relay does not exceed the rated value, otherwise the latching relay that has been set may be reset or vice versa. The latching relay is reset before shipping. If excessive vibration or shock is imposed, however, the latching relay may be set accidentally. Be sure to apply a reset signal before use. Therefore, be sure to use the maximum allowable voltage as specified in the catalog. As a rule, the rated voltage must be applied to the coil. A voltage exceeding the rated value, however can be applied to the coil provided that the voltage is less than or equal to the maximum allowable voltage. It must be noted that continuous voltage application to the coil will cause a coil temperature increase which may affect characteristics such as electrical life and coil insulation. High Frequency Relay G6K--RF 589 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronic Components LLC ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for Products received are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Currencies. If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller and which is available on the due date; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: 1. Shipments shall be by a carrier selected by Seller; 2. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; 3. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; 4. Delivery and shipping dates are estimates only. 5. Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Seller's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies, or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty. 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Product on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Law. These Terms are governed by Illinois law (without regard to conflict of law principles). Federal and state courts in Illinois shall have exclusive jurisdiction for any dispute hereunder. (d) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice.. (g) Definitions. As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii)Use in consumer products or any use in significant quantities. (iv)Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. JB301-E3-01 3/05 OMRON CANADA, INC. OMRON ON-LINE 885 Milner Avenue Toronto, Ontario M1B 5V8 Global - http://www.omron.com USA - http://www.components.omron.com Canada - http://www.omron.ca 416-286-6465 Specifications subject to change without notice Printed in USA