Couplers with Connectors (H Type) HDH Series Features 1.High Performance The high frequency characteristics feature extremely low loss, a high degree of matching, and high isolation. HDH-00803GHD HDH-01503GHD 2.Power Uniform Distribution and 90Phase Difference Type This is a one input, two output (or two input, one output) power uniform distribution type having a 90phase difference between the two outputs (or two inputs). HDH-01503GH HDH-03003GHD 3.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. HDH-06003GHD HDH-09003GHD HDH-12803CHD 4.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. Product Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohms 2 to 50 W Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item Standard Conditions 1.Contact resistance 4 m ohms max. 1A 2.Insulation resistance 1000 M ohms min. 100 V DC 3.Vibration 4.Shock Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1 s or more acceleration of 98 m/s2 for 2 hours in each of 3 directions No damage, cracks, or parts dislocation Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : -55c +5c to +35c +85c +5c to +35c 5.Temperature cycle No damage, cracks, or parts dislocation Time : 30 15 max. 30 15 max. (Minutes) 200 cycles The test method conforms to MIL-STD-202. Materials Part 16 Material Finish Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum --------- Board Dielectric Gold plating Ordering Information HD H - 008 03 G H D 1 2 3 4 5 6 7 1 Series Name: HD (Directional Couplers) 4 Coupling 2 Type of Connector 5 Frequency Relative Bandwidth 03:3dB H: Indicates the HRM (SMA) Series B:From 5% to below 10% 3 Center Frequency C:From 10% to below 15% 008: 0.75GHz D:From 15% to below 20% 015: 1.5GHz G:From 30% to below 35% 017: 1.7GHz 6 Form 020: 2.0GHz H:H Type 030: 3.0GHz 7 D:With Termination 040: 4.0GHz 060: 6.0GHz 090: 9.0GHz 128: 12.8GHz Specifications Part Number Frequency Range (GHz) Coupling (dB) Frequency Sensitivity Directivity (dB Min) Primary Line Secondary Line V.S.W.R. V.S.W.R. (Max) (Max) Weight (g) Power (W) HDH-00803GHD 0.5~1.0 0 3+0.2 0.5 20 1.15 1.15 49 02 HDH-01503GH 1.0~2.0 3+0.2 0 0.5 20 1.20 1.20 34 50 HDH-01503GHD 1.0~2.0 0 3+0.2 0.5 20 1.20 1.20 34 2 HDH-01703CH 1.5~1.9 3+0.2 0 0.3 20 1.20 1.20 34 50 HDH-01703CHD 1.5~1.9 0 3+0.2 0.3 20 1.20 1.20 34 2 HDH-02003DHD 1.7~2.3 0 3+0.2 0.3 18 1.20 1.20 34 2 HDH-03003GHD 2.0~4.0 0 3+0.2 0.5 18 1.20 1.20 25 2 HDH-04003BH 3.7~4.2 3+0.2 0 0.3 20 1.20 1.20 23 50 HDH-06003GHD 4.0~7.8 0 3+0.3 0.5 17 1.25 1.25 23 2 HDH-09003GHD 8.0~11.0 3+0.3 0 0.5 15 1.30 1.30 31 2 HDH-12803CHD 10.5~14.5 0 3+0.6 0.5 12 1.40 1.40 31 2 Directivity have had the coupling (nominal value of 3 dB) subtracted. There is a phase difference of 90between the output and the coupling. 17 External Dimensions 18 Typical Data 19 Couplers with Connectors (I Type) HDH Series Features 1.High Performance The high frequency characteristics feature. Extremely high degree of matching, and high isolation. HDH-00810GID HDH-01510GID 2.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 3.Couplers with SMA Connectors HDH-02249AI HDH-03020GID Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. 4.Full Coupling Variations Full variations of coupling over 6 dB are available. HDH-06020GID HDH-09010GID HDH-12806CID Product Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohms 4 to 50 W Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item Standard Conditions 1.Contact resistance 4 m ohms max. 1A 2.Insulation resistance 1000 M ohms Max. 100 V DC 3.Vibration 4.Shock Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1 s or more acceleration of 98 m/s2 for 2 hours in each of 3 directions No damage, cracks, or parts dislocation Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : -55c +5c to +35c +85c +5c to +35c 5.Temperature cycle No damage, cracks, or parts dislocation Time : 30 15 max. 30 15 max. (Minutes) 200 cycles The test method conforms to MIL-STD-202. Materials Part 20 Material Finish Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum --------- Board Dielectric Gold plating Ordering Information HD H - 008 10 G I D 1 2 3 4 5 1 Series Name: HD (Directional Couplers) 6 7 4 Coupling 06 : 6dB 10 : 10dB 20 : 20dB 30 : 30dB 37 : 37dB 49 : 49dB 2 Type of Connector H: Indicates the HRM (SMA) Series 3 Center Frequency 008 : 0.8GHz 009 : 0.9GHz 015 : 1.5GHz 017 : 1.7GHz 022 : 2.2GHz 030 : 3.0GHz 060 : 6.0GHz 090 : 9.0GHz 128 : 12.8GHz 5 Frequency Relative Bandwidth C: From 10% to below 15% G: From 30% to below 35% 6 Form I: I Type, H: H Type 7 D: With Termination Isolation port with termination is designated as D at the end of each part No. Specifications Part Number Secondary Primary Line Frequency Frequency Insertion Coupling Directivity Line V.S.W.R. Range Sensitivity Loss (dB MIN) (dB) V.S.W.R. (dB) (GHz) (dB MAX) (MAX) (MAX) Weight (g) Power (W) HDH-00810GID 0.5~1.0 101.0 0.75 0.3 20 1.15 1.15 49 10 HDH-00820GID 0.5~1.0 201.0 0.75 0.3 18 1.15 1.15 50 50 HDH-00937CI 0.8~1.0 371.0 0.5 0.3 20 1.20 1.20 50 50 HDH-01510GID 1.0~2.0 101.2 0.75 0.4 20 1.20 1.20 34 10 HDH-01520GID 1.0~2.0 201.2 0.75 0.4 18 1.20 1.20 34 50 HDH-01530CI 1.4~1.6 +1.0 30_2.0 0.25 0.5 20 1.20 1.20 34 50 HDH-01537CI 1.4~1.6 37 0.3 0.5 20 1.20 1.20 34 50 HDH-01706CID 1.5~1.9 61.0 0.3 0.4 18 1.20 1.20 34 05 HDH-01710CID 1.5~1.9 101.2 0.3 0.4 20 1.20 1.20 34 10 HDH-01720CID 1.5~1.9 201.2 0.4 0.4 20 1.20 1.20 34 50 HDH-01730CID 1.5~1.9 301.5 0.4 0.4 18 1.20 1.20 34 50 HDH-02210AI 2.11~2.2 101.0 0.25 0.8 18 1.20 1.20 42 50 HDH-02220AID 2.11~2.2 201.0 0.25 0.3 16 1.20 1.20 42 50 HDH-02249AI 2.11~2.2 491.0 0.25 0.3 15 1.20 1.20 42 50 HDH-03010GID 2.0~4.0 101.2 0.75 0.5 18 1.20 1.20 25 10 HDH-03020GID 2.0~4.0 201.2 0.75 0.5 18 1.20 1.20 25 50 HDH-06010GID 4.0~7.8 101.2 0.75 0.5 17 1.25 1.25 23 10 HDH-06020GID 4.0~7.8 201.2 0.75 0.5 17 1.25 1.25 23 50 HDH-09006GID 8.0~11.0 61.2 0.75 0.5 15 1.30 1.30 24 04 HDH-09010GID 8.0~11.0 101.2 0.75 0.5 15 1.30 1.30 24 10 HDH-09020GID 8.0~11.0 202.0 0.75 0.5 13 1.30 1.30 24 10 HDH-12806CID 10.5~14.5 61.0 0.5 2.1 15 1.30 1.35 28 04 HDH-12810CID 10.5~14.5 101.25 0.5 1.1 15 1.30 1.35 28 10 HDH-12820CID 10.5~14.5 201.25 0.5 0.6 15 1.30 1.35 28 50 +1.0 _1.5 The coupling loss component is not included in the insertion loss (unless the item is marked with an symbol) 21 External Dimensions 22 Typical Data 23