158X Series Type X2 Suppressor Capacitors Metallized Polyester / Radial Leads * Radial Leads in Two Lengths * UL-1414 and CSA Approved * Flame Retardant Case Meets UL94V-0 * Potting End Fill Meets UL94V-0 * Used in applications where damage to the capacitor will not lead to the danger of electrical shock * Lead Material Tinned Copper Clad Steel GENERAL SPECIFICATIONS . Operating Temperature: -40 C to +100 C Voltage Range: 275/250 VAC, 60 Hz Capacitance Range: 0.01 F to 2.2 F Capacitance Tolerance: 20% (Standard) 10% (Special) Dissipation Factor (DF) tg 0.01 Max at 1,000 100kHz International Approvals Safety Agency Standard File Number UL UL-1414 (250VAC) E171988 UL UL-1283 (250VAC) E223166 C22 2, No. 1-98/No.8 (250VAC) 1572961 CSA VDE SEMKO FIMKO DEMKO NEMKO IEC384-14 II F V/s F V/s .010 2800 0.22 1200 .022 2400 0.47 1000 .033 2400 0.68 1000 .047 2000 1.00 800 .068 2000 1.50 800 .100 1600 2.20 600 Outline Dimensions 109365 EN 132400 IEC384-14 II 9817262 EN 132400 IEC384-14 II 11141 EN 132400 IEC384-14 II 9817262 EN 132400 IEC384-14 II Complies with the EU Directive 2002/95/ EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). P98101124 EN 132400 Ratings Inches Catalog Part Number Insulation Resistance (IR) (@ 500 VDC and 20 C) Terminal to Terminal: 0.33F 15,000 M min 0.47F 5,000 M x F min Both Terminals to Body: 100,000 M min Maximum Pulse Rise Time Millimeters Cap (F) L Length T Thickness H Height S Spacing Od L Length T Thickness H Height S Spacing 158X103 0.010 0.669 0.197 0.472 Od 0.591 0.024 17.0 5.0 12.0 15.0 0.6 158X123 0.012 0.669 0.197 158X153 0.015 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6 0.472 0.591 0.024 17.0 5.0 12.0 15.0 158X183 0.018 0.669 0.6 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 158X223 0.022 0.6 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 158X273 0.6 0.027 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6 158X333 0.033 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6 158X393 0.039 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8 158X473 0.047 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8 158X563 0.056 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8 158X683 0.068 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8 158X823 0.082 0.669 0.256 0.591 0.591 0.031 17.0 6.5 15.0 15.0 0.8 158X104 0.100 0.669 0.315 0.591 0.591 0.031 17.0 8.0 15.0 15.0 0.8 158X124 0.120 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8 158X154 0.150 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8 158X184 0.180 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8 158X224 0.220 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8 158X274 0.270 1.181 0.354 0.669 1.083 0.031 30.0 9.0 17.0 27.5 0.8 158X334 0.330 0.984 0.394 0.768 0.886 0.031 25.0 10.0 19.5 22.5 0.8 158X394 0.390 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8 158X474 0.470 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8 158X564 0.560 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8 158X684 0.680 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8 158X824 0.820 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0 158X105 1.000 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0 158X125 1.200 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0 158X155 1.500 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0 158X185 1.800 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0 158X225 2.200 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0 NOTE: If 10% tolerance is required, add 'K' to end of Catalog Number NOTE: Parts are normally supplied with leads 30mm minimum To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number. CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com 158X Series Type X2 Suppressor Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 * www.cde.com