MILITARY DATA SHEET Original Creation Date: 10/30/95 Last Update Date: 10/21/96 Last Major Revision Date: 10/30/95 MN100370-X REV 0C0 LOW POWER UNIVERSAL DEMULTIPLEXER/DECODER General Description The 100370 universal demultiplexer/decoder functions as either a dual 1-of-4 decoder or as a single 1-of-8 decoder, depending on the signal applied to the Mode Control (M) input. In the dual mode, each half has a pair of active - LOW Enable (E) inputs. Pin assignments for the E Inputs are such that inthe 1-of-8 mode they can easily be tied together in pairs to provide two active-LOW enable (E1a to E1b, E2a to E2b). Signals applied to auxiliary inputs Ha, Hb and Hc determine whether the outputs are active HIGH or active LOW. In the dual 1-of-4 mode the Address inputs are Aoa, A1a and Aob, A1b with A2a unused (i.e., left open, tied to VEE or with LOW signal applied). In the 1-of-8 mode, the Address inputs are Aoa, A1a, A2a with Aob and A1b LOW or open. All inputs have 50K ohm pulldown resistors. Industry Part Number NS Part Numbers 100370 100370DMQB 100370FMQB Prime Die F370 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN100370-X REV 0C0 Features - 35% power reduction of the 100170 2000V ESD protection Pin/function compatible with 100170 Voltage compensated operating range= -4.2V to -5.7V 2 MILITARY DATA SHEET MN100370-X REV 0C0 (Absolute Maximum Ratings) (Note 1) Storage Temperature (Tstg) -65C to +150C Maximum Junction Temperature (Tj) Ceramic Plastic Vee Pin Potential to Ground Pin +175C +150C -7.0V to +0.5V Input Voltage (DC) Vee to +0.5V Output Current (DC Output HIGH) -50 mA ESD (Note 2) >2000V Note 1: Note 2: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. ESD testing conforms to MIL-STD-883, Method 3015. Recommended Operating Conditions Case Temperature (Tc) Commercial Industrial Military Supply Voltage (Vee) 0 C to +85 C -40 C to +85C -55C to +125C -5.7V to -4.2V 3 MILITARY DATA SHEET MN100370-X REV 0C0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vee Range: -4.2V to -5.7V, Tc= -55C to +125C, VCC=VCCA=GND SYMBOL IIH PARAMETER Input HIGH Current CONDITIONS NOTES VEE=-5.7V, VM=-0.87V PINNAME MIN MAX UNIT SUBGROUPS 1, 3 INPUTS 240 uA 1, 2 1, 3 INPUTS 340 uA 3 uA 1, 2, 3 IIL Input Low Current VEE=-4.2V, VM=-1.83V 1, 3 INPUTS VOH Output HIGH Voltage VEE=-4.2V/-5.7V, VIH=-0.87V, VIL=-1.83V, LOADING: 50 Ohms to -2.0V 1, 3 OUTPUTS -1025 -870 mV 1, 2 1, 3 OUTPUTS -1085 -870 mV 3 1, 3 OUTPUTS -1830 -1620 mV 1, 2 1, 3 OUTPUTS -1830 -1555 mV 3 1, 3 OUTPUTS -1035 mV 1, 2 1, 3 OUTPUTS -1085 mV 3 VOL VOHC VOLC Output LOW Voltage Vee=-4.2V/-5.7V, VIH=-0.87V, VIL=-1.83V, LOADING: 50 Ohms to -2.0V Output HIGH Voltage Corner Point High Vee=-4.2V/-5.7V, VIH=-1.165V, VIL=-1.475V, Loading: 50 Ohms to -2.0V Output LOW Voltage Corner Point High Vee=-4.2V/-5.7V, VIH=-1.165V, VIL=-1.475V, LOADING: 50 Ohms to -2.0V 0.5 1, 3 OUTPUTS -1610 mV 1, 2 1, 3 OUTPUTS -1555 mV 3 VIH Input HIGH Voltage 1, INPUTS 3, 7 -1165 -870 mV 1, 2, 3 VIL Input LOW Voltage 1, INPUTS 3, 7 -1830 -1475 mV 1, 2, 3 IEE Input LOW Voltage 1, 3 INPUTS -105 -36 mA 1, 2, 3 VEE=-4.2/-5.7V 4 MILITARY DATA SHEET MN100370-X REV 0C0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: VEE Range: -4.2V to -5.7V, LOADING: 50 Ohms to -2.0V, VCC=VCCA=GND SYMBOL PARAMETER tPLH/tPHL( 1) Propagation Delay tPLH/tPHL( 2) tPLH/tPHL( 3) tPLH/tPHL( 4) tTLH/tTHL Propagation Delay Propagation Delay Propagation Delay Transistion Time Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: CONDITIONS NOTES VEE=-4.2/-5.7V VEE=-4.2/-5.7V VEE=-4.2/-5.7V VEE=-4.2/-5.7V VEE=-4.2/-5.7V PINNAME MIN MAX UNIT 2, 4 Ena/Enb 0.4 to Zn 2.2 ns 9 2, 4 Ena/Enb 0.4 to Zn 2.7 ns 10 2, 4 Ena/Enb 0.3 to Zn 2.4 ns 11 2, 4 Ana/Anb 0.4 to Zn 2.4 ns 9 2, 4 Ana/Anb 0.4 to Zn 2.9 ns 10 2, 4 Ana/Anb 0.3 to Zn 2.6 ns 11 2, 4 Ha/Hb/H 0.4 c to Zn 2.4 ns 9 2, 4 Ha/Hb/H 0.4 c to Zn 2.9 ns 10 2, 4 Ha/Hb/H 0.3 c to Zn 2.6 ns 11 2, 4 M to Zn 0.6 2.8 ns 9 2, 4 M to Zn 0.7 3.7 ns 10 2, 4 M to Zn 0.4 3.1 ns 11 6 1.6 ns 9, 10, 11 Zn 0.3 Screen tested 100% on each device at -55 C, +25 C and +125 C temp., subgroups 1, 2, 3, 7 & 8. Screen tested 100% on each device at +25 C temp only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, +125 C & -55 C temp., subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, subgroup A9, and at +125 C & -55 C temp., subgroups A10 & 11. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C temp. only, subgroup A9. Not tested at +25 C, +125 C & -55 C temp. (DESIGN CHARACTERIZATION DATA). Guaranteed by applying specified input condition and testing VOH/VOL. 5 SUBGROUPS MILITARY DATA SHEET MN100370-X REV 0C0 Graphics and Diagrams GRAPHICS# DESCRIPTION J24ERJ CERDIP(J), 24LD .400 CENTERS (P/P DWG) P000090A CERDIP (J), 24LD .400 CENTERS (PIN OUT) P000091A CERPAC, QUAD, 24 LEAD (PIN OUT) W24BRE CERPAC, QUAD, 24 LEAD (P/P DWG) See attached graphics following this page. 6