CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts DF005S THRU DF10S Features * Glass Passivated Die Construction * Diffused Junction * Low Forward Voltage Drop, High Current Capability * Surge Overload Rating to 50A Peak * Designed for Surface Mount Application * Plastic Material - UL Flammability Classification 94V-0 L G A B H D E C DF -S J K Mechanical Data * Case : Molded Plastic * Terminals : Solder Plated Leads, Solderable per MIL-STD-202, Method 208 * Polarity : As Marked on Case * Approx Weight : 0.38 grams * Mounting Position : Any * Marking : Type Number Dim Min Max A 7.40 7.90 B 6.20 6.50 C 0.22 0.30 D 0.076 0.33 10.40 E G 1.02 1.53 H 8.13 8.51 J 2.40 2.60 K 5.00 5.20 L 1.00 1.20 A ll Dimens ions in mm Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols DF 005S DF 01S DF 02S DF 04S DF 06S DF 08S DF 10S Units Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRWM VR 50 100 200 400 600 800 1000 Volts RMS Reverse voltage VRMS 35 70 140 280 420 560 700 Volts Io 1.0 Amp Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 50 Amp Forward Voltage (per element) VFM 1.1 Volts Average Rectified Output Current @ TA=40 @ IF=1.0 A @ TA=25 Peak Reverse Current at Rated DC Blocking Voltage (per element) @ TA=100 IRM I2t Rating for Fusing (t<8.3ms) I2t 10.4 A2S Typical Junction Capacitance per element (Note 1) Cj 25 pF Typical Thermal Resistance, Junction to Ambient (Note 2) RJA 40 /W Operating and Storage Temperature Range Tj TSTG 10 500 -65 to +150 Notes: (1) Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. (2) Thermal Resistance, junction to ambient, measured on PC board with 5.02mm (0.03mm thick) land areas. A RATING AND CHARACTERISTIC CURVES DF005S THRU DF10S 1.0 I F , INST ANT ANEOUS FOR WARD CURRENT 0.5 I (AV) , AVERAGE FOR WARD CURRENT (A) (A) 60 Hz Resistive or Inductive load 0 40 60 100 80 120 10 T j = 25C Pulse Width = 300s 2% duty cycle 1.0 0.1 0.01 140 0.4 60 1.0 1.4 1.2 100 T j = 25c f = 1.0 Mhz V sig = 50 mV p-p Single half-sine-W ave (JEDEC Method) C J , CAP ACIT ANCE (pF) 50 40 30 20 10 10 0 1 1 10 1 100 (A) CURRENT 100 T j = 125C 10 1.0 T j = 25C 0.1 0.01 0 10 100 V R , REVERSE VOL TAGE (V) Fi g. 4 Typ Junction Capacitance (per element ) NUMBER OF CYCLES AT 60 Hz Fi g. 3 Max Non-Repetitive Peak Forward Sur ge Current I R , INST ANT ANEOUS REVERSE (A) CURRENT 0.8 V F , INST ANT ANEOUS FOR WARD VOL TAGE (V) Fi g. 2 Typ Forward Characteristics (per element) T A , AMBIENT TEMPERA TURE (C) Fi g. 1 Output Current Deratin g Curve I FSM , PEAK FOR WARD SURGE 0.6 20 40 60 80 100 120 140 PERCENT OF RA TED PEAK REVERSE VOL TAGE (%) Fi g. 5 Typ Reverse Characteristics (per element )