D sub:Layout 1 3/24/09 12:37 PM Page 1 Inside front cvr & TOC:Layout 1 3/24/09 11:55 AM Page 1 Cannon, VEAM, BIW A Historical Achievement of Technology Leadership Defining and Championing Innovation Showcasing a portfolio of creativity, ITTs "Engineered For Life" execution embraces products which have become ubiquitous in a broad collection of markets including: Military/Aerospace, Civil Aircraft, Industrial Instrumentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and Automotive. ITTs rich interconnect history embraces contributions to both technological breakthroughs and social movements. With one of the industrys broadest product offerings, ITTs interconnect products have supported: * Every Free World space mission, bringing the universe to our doorstep. * Commercial and military communications systems, linking the voices of the world. * Motion picture, radio, and television equipment, serving laughter and entertainment to millions. * Computerized tools, reshaping the information highway. * Aircraft, rapid transit, and automobiles, mobilizing our expanding society. * Oil and natural gas production, powering the worlds economies. * Agricultural equipment, attacking the roots of world hunger. First "Cannon Plug" 4 Pole Power Connector Cannon pioneers sound and film connectors with the M Series The first commercial and power connectors Cannon connectors made possible the first radio microphones, the first black and white television cameras as well as the first color television equipment. Cannon founded by James Cannon Cannon creates "K" series connectors for DC-1's The first aviation circular & rack panel connectors developed by Cannon Cannon creates "AN" military plugs Cannon originates the first "D-Sub" connectors Cannon develops the first Tri-Service connector, the mother of modern day military spec's Cannon pioneers guided missle umbilical connectors Cannon's Cannon's AF Firewall connectors X connector is the first microminiature used in early audio connector DC-3 transports Cannon develops Cannon establishes the first "Micro" an aviation milestone connectors through the expansion of Rack and Panel Cannon partners connectors with the BKAD/E Series with technology leaders to develop the first complete fiber optic systems Internet deployed systems 1960 Cannon's first entry into the Medical Electronics market The Beginning 1930 Photo courtesy of The Academy of Motion Pictures, Arts and Sciences. Power, Film, Commercial Aviation Military Telecom Technology Leadership Lean manufacturing 1950 1920 Breakaway 1980 1970 1940 1915 +2000 Space Medical, Transportation Pioneering technologies Engineered solutions Growth Chip-on-Flex PHD Quadrax Stacking Charting the Future www.ittcannon.com NEW TOC:Layout 1 3/26/09 10:34 AM Page 1 Cannon D Subminiature Accessories Description D Subminiature Accessories Accessory Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 * Metal Backshell Die Cast Zinc, EMI Shielded Straight Exit . . . . . . . . . . . . . . . . . . . . 4 Metal Backshell Straight Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Metal Backshell 45 Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 * Plastic Backshell Snap-Together Metalized Plastic, EMI Shielded . . . . . . . . . . . . . . . 9 Locking Hardware for Snap-Together Plastic Backshell . . . . . . . . . 10 Low Cost Metalized Plastic, Straight Exit . . . . . . . . . . . . . . . . . . . 10 Snap-Together Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 One-Piece Snap-Together . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 One-Piece Straight Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 One-Piece Plastic, 90 Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 * Locking Hardware Screw Lock Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 Slide Lock Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Spring Latch Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Jackscrew/Jackpot Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 * Guide Pin Plate Female Guide Pin Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Male Guide Pin Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 * Connector Saver High Reliability Connector Saver . . . . . . . . . . . . . . . . . . . . . . . . . 20 * Miscellaneous Polarizing Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Right Angle Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Wire Hole Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Dust Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Interfacial Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Potting Shell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Product Safety Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 www.ittcannon.com Table of Contents D sub:Layout 1 3/24/09 12:37 PM Page 2 D Cannon D-Subminiature Accessories Selection Guide Locking Hardware Backshell Style EMI Shielded Snap-Together Metalized Plastic Straight Exit see page 9 EMI Shielded Snap-Together Metalized Plastic 50 Exit see page 9 Female Screw Lock see page 14 Male Screw Lock see page 13 Sliding Lock Retainer see page 15 Slide Lock Post see page 15 Spring Latch Plate see page 16 Spring Latch see page 16 -- -- -- -- -- -- -- -- -- -- -- -- EMI Shielded Die Cast Zinc Metal see page 4 -- -- -- -- -- Metal Metal Backshell 45 Exit see page 4 -- -- -- -- -- -- Metal Deep Straight Clamp see page 7 * * * * * * Metal Round Cable Clamp see page 7 * * * * * * Metal Short Straight Clamp see page 8 * * * * * * Metal 90 Entry see page 8 * * * * * * Plastic Snap-Together Universal see page 11 * * -- -- -- -- Plastic One-Piece Snap-Together see page 11 -- -- -- -- -- Plastic One-Piece Plastic Straight Exit see page 12 -- -- * * * * Plastic One-Piece Plastic 90 Exit see page 12 -- -- * * * * Supplied with backshell * Optional compatible locking hardware -- Not compatible 2 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 3 D Cannon D-Subminiature Accessories Selection Guide Locking Hardware Jackscrew Assembly see page 17 Jackpost Assembly see page 17 Recessed Jackscrew see page 10 Extended Jackscrew see page 10 Thumbscrew see page 10 Jackpost for In-Line Connections see page 10 -- -- * * * * -- -- * * * * -- -- -- -- -- -- -- -- -- -- -- -- -- * -- -- -- -- -- * -- -- -- -- -- * -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 3 D sub:Layout 1 3/24/09 12:37 PM Page 4 D Cannon D-Subminiature Accessories Metal Backshell Die Cast Zinc Backshell, Straight Exit, EMI Shielded 9 and 15 Position 25 Position A A B D A D F F Shell Part Size Layout Number DE 9 980-2000-345 DA 15 980-2000-346 DB 25 980-2000-347 DC 37 980-2000-348 DD 50 980-2000-349 Specifications Attenuation: Temperature Range: E Dia. E Dia. F * Improves conformance to FCC DOC #20780 shielding requirements * No crimp ferrule tooling needed * Kit consists of 1 front shell, 1 rear shell, 2 screws, 2 hex nuts, 2 mounting screws, 2 end brackets, 1 set of compression inserts C D E Dia. Product Features C B B Die cast metal backshells reduce EMI/RFI emissions. Die cast metal backshells offer improved shielding in a rugged package. 37 and 50 Position A 0,13 (.005) 31,12 (1.225) 39,12 (1.540) 53,09 (2.090) 69,34 (2.730) 66,70 (2.626) B 0,13 (.005) 37,21 (1.465) 40,64 (1.600) 39,37 (1.550) 45,72 (1.800) 45,72 (1.800) C D oE F 0,13 (.005) 0,13 (.005) 0,13 (.005) 0,13 (.005) 15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984) 15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312) 17,53 (690) 15,75 (.620) 13,34 (.525) 47,17 (1.857) 21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500) 21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406) Materials and Finishes Backshell Material: Backshell Finish: Compression Inserts: Hardware Material: Hardware Finish: -50 dB @ 1000MHz -20 C to 80 C Attenuation Zinc Clear Zinc PVC Steel Clear Zinc Diecast Shell Shielding Performance 0 -10 -20 db -30 -40 -50 -60 -70 100 1000 Mhz Compression inserts (included with die cast zinc metal backshell) Compression inserts accommodate a wide variety of cable sizes. Position 9,15 25 37,50 Cable Diameter 4,83/8,89 (.190/.350) 4,83/11,68 (.190/.460) 7,62/17,27 (.300/.680) 9 and 15 Position* 25 Position* 1 1 37 and 50 Position* 6 2 2 3 5 3 5 4 3 2 1 4 4 5 * Inserts may be supplied mirror image. Position 9,15 25 37.50 #1 O.D. I.D. 12,07 (.475) 8,13 (.320) 15,24 (.600) 11,43 (.450) 16,64 (.655) 14,48 (.570) #2 #3 #4 O.D. I.D. O.D. I.D. O.D. I.D. 9,14 (.360) 8,00 (.315) 9,14 (.360) 6,48 (.255) 9,14 (.360) 7,24 (.285) 11,43 (.450) 10,41 (.410) 11.43 (.450) 9,40 (.370) 11.43 (.450) 7,62 (.300) 17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500) 4 #5 #6 O.D. I.D. O.D. I.D. 9,14 (.360) 5,33 (.210) -- -- 11.43 (.450) 5,84 (.230) -- -- 16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/26/09 7:52 AM Page 5 Metal Backshell D Cannon D-Subminiature Accessories Metal Backshell Straight Exit The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from magnetic and radio interferences to cable assemblies. This backshell series is characterized by simple assembly and fit for ndustrial and telecom applications. Product Features: * No crimp ferrule tooling needed * Material: Zinc, blue chromated * Unique metal filled plastic cable strain relief guarantees 360 shielding * RoHS compliant * -40 - +120C temperature range * Corrosion resistant Part Description With #4-40 UNC Jackscew Part Description With M3 Jackscrew Shell Size Size 15 A B C D Cable Diameter DEFME-101 DEFMX-101 Size 9 39,55mm [1.555inch] 31,3mm [1.232inch] 14,6mm [0.575inch] 25,0mm [0.984inch] DAFME-101 DAFMX-101 Size 15 41,7mm [1.642inch] 39,3mm [1.547inch] 14,6mm [0.575inch] 33,3mm [1.311inch] 4 - 9mm DBFME-101 DBFMX-101 Size 25 49,0mm [1.929inch] 53,5mm [2.106inch] 14,6mm [0.575inch] 47,0mm [1.850inch] 4 - 9mm DCFME-101 DCFMX-101 Size 37 53,3mm [1.098inch] 69,7mm [2.744inch] 14,6mm [0.575inch] 63,5mm [2.500inch] 4 - 9mm Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, and 2 jack screws. Assembly instructions Size 9, 15, 25, 37 Attenuation curve Use two halves of strain relief (different sizes can be mixed) Strip cable 18mm and shape cable to two pigtails Attach the strain relief around the cable Bend cable shielding back on outside of strain relief Mount connector and cable into the backshell Assemble the other half (screwing force: 100-120 Ncm) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 5 4 - 9mm D sub:Layout 1 4/1/09 10:23 AM Page 6 D Cannon D-Subminiature Accessories Metal Backshell Metal Backshell 45 Exit The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from magnetic and radio interferences to cable assemblies. This backshell series is characterized by simple assembly and fit for Industrial and telecom applications. Product Features: * No crimp ferrule tooling needed * Material: Zinc, blue chromated * Unique metal filled plastic cable strain relief guarantees 360 shielding * RoHS compliant * -40 - +120C temperature range * Corrosion resistant Size 15 Size 50 Part Description With #4-40 UNC Jackscew Part Description With M3 Jackscrew Shell Size A B C D Cable Diameter DEFME-100 DEFMX-100 Size 9* 37,5mm [1.476inch] 35,5mm [1.398inch] 14,6mm [0.575inch] DAFME-100 DAFMX-100 Size 15** 41,5mm [1.634inch] 39,5mm [1.555inch] 14,6mm [0.575inch] 33,3mm [1.311inch] 4 - 9mm 4 - 9mm DBFME-100 DBFMX-100 Size 25** 41,5mm [1.634inch] 53,5mm [2.106inch] 14,5mm [0.571inch] 47,0mm [1.850inch] 4 - 9mm DCFME-100 DCFMX-100 Size 37** 41,5mm [1.634inch] 70,0mm [2.756inch] 14,5mm [0.571inch] 63,5mm [2.500inch] 4 - 9mm DDFME-100 DDFMX-100 Size 50*** 45,0mm [1.772inch] 67,5mm [2.657inch] 17,4mm [0.69inch] 61,0mm [2.402inch] 13-16mm *Size 9 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 1 jack screw **Size 15, 25, 37 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 2 jack screws ***Size 50 Backshell: Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 4 mounting crosshead screws, 2 jack screws Assembly instructions Size 9, 15, 25, 37 Attenuation curve Use two halves of strain relief (different sizes can be mixed) Bend cable shielding back on outside of strain relief Strip cable 18mm and shape cable to two pigtails Attach the strain relief around the cable Mount connector and cable into the backshell Assemble the other half (screwing force: 100-120 Ncm) 6 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 7 Metal Backshell D Cannon D-Subminiature Accessories Metal Backshell Metal Backshells provide strain relief. Various profiles available for different cable routing requirements. Product Features Materials and Finishes Backshell Material: Low Carbon Steel or Brass Backshell Finish: Chromate over Cadmium (Mil Spec) or Zinc (RoHS) Hardware Material: Steel Qualified to MIL-Spec M85049 Deep Straight Clamp E CABLE ENTRY IN SHELL B H MAX. G F C A 0,38 0,13 (.015 .005) D MAX. CABLE ENTRY IN SHELL 3,45 0,13 (.136 .005) TWO MTG. HOLES Brass 50 in. Gold over Copper DE24657-16 DA24658-15 DB24659-15 DC24660-16 DD24661-13 Mil-Spec Parts (Brass) Shell RoHS Compliant Mil-Spec Size Part Number Part Number Part Number DE DE24657-29 M85049/48-1-6F DE24657-5 DA DA24658-28 M85049/48-1-7F DA24658-2 DB DB24659-27 M85049/48-1-8F DB24659-2 DC DC24660-27 M85049/48-1-9F DC24660-11 DD DD24661-27 M85049/48-1-10F DD24661-4 * Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts. Shell Part Mil Spec A B Size Layout Number Part Number* 0,38 (.015) 0,572 (.0225) DE 9 DE24657 M85049/48-1-1F 30,56 (1.203) 12,484 (.4915) DA 15 DA24658 M85049/48-1-2F 38,89 (1.531) 12,484 (.4915) DB 25 DB24659 M85049/48-1-3F 52,78 (2.078) 12,484 (.4915) DC 37 DC24660 M85049/48-1-4F 69,04 (2.718) 12,484 (.4915) DD 50 DD24661 M85049/48-1-5F 66,68 (2.625) 15,253 (.6005) * Parts ordered with no suffix or "Z" suffix will be substituted with "F" suffix. C 0,38 (.015) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D max. 14,68 (.578) 14,68 (.578) 14,68 (.578) 14,68 (.578) 17,45 (.578) E 0,38 (.015) 9,53 (.375) 18,11 (.713) 25,40 (1.000) 34,93 (1.375) 35,71 (1.406) F 0,38 (.015) 9,53 (.375) 7.93 (.312) 7.93 (.312) 7.93 (.312) 10,31 (.406) G 0,38 (.015) 19,05 (.750) 19,05 (.750) 25,40 (1.000) 25,40 (1.000) 28,57 (1.125) H max. 31,75 (1.250) 31,75 (1.250) 39,70 (1.563) 39,70 (1.563) 42,88 (1.688) Round Cable Clamp 3,05 ,013 (.120 .005) DIA. TWO MTG. HOLES A C E B + + G F D MAX. CABLE ENTRY 0,38 0,13 (.015 .005) * Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts. Mil-Spec Parts (Brass) Shell RoHS Compliant Mil-Spec Size Part Number Part Number Part Number DE DE44994-14 M85049/48-2-6F DE44994-3 DA DA20961-26 M85049/48-2-7F DA20961-3 DB DB20962-30 M85049/48-2-8F DB20962-8 DC DC20963-27 M85049/48-2-9F DC20963-8 DD DD20964-32 M85049/48-2-10F DD20964-8 Shell Part Mil Spec A B Size Layout Number Part Number* 0,38 (.015) 0,572 (.0225) DE 9 DE44994 M85049/48-2-1F 30,68 (1.208) 12,70 (.500) DA 15 DA20961 M85049/48-2-2F 38,89 (1.531) 12,70 (.500) DB 25 DB20962 M85049/48-2-3F 52,78 (2.078) 12,70 (.500) DC 37 DC20963 M85049/48-2-4F 69,04 (2.718) 12,70 (.500) DD 50 DD20964 M85049/48-2-5F 66,68 (2.625) 15,47 (.609) * Parts ordered with no suffix or "Z" suffix will be substituted with "F" suffix. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 7 C 0,38 (.015) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D max. 10,31 (.406) 10,31 (.406) 15,06 (.593) 18,23 (.718) 20,62 (.812) E 0,38 (.015) 16,79 (.661) 24,99 (.984) 38,48 (1.515) 55,14 (2.171) 53,16 (2.093) Brass 50 in. Gold over Copper DE44994-2 DA20961-16 DB20962-18 DC20963-17 DD20964-19 F 0,38 (.015) 3,18 (.125) 3,18 (.125) 4,75 (.187) 6,35 (.250) 7,92 (.312) G 0,76 (.030) 26,18 (1.031) 26,18 (1.031) 26,98 (1.062) 26,98 (1.062) 26,98 (1.062) D sub:Layout 1 3/24/09 12:37 PM Page 8 D Cannon D-Subminiature Accessories Metal Backshell Short Straight Clamp A C B G 12,30 0,38 (.484 .015) 3,05 0,13 (.120 .005) DIA. TWO MTG. HOLES F (TYP.) * Kit consists of 1 shell, 2 or 3 screws, 2 or 3 hex nuts E CABLE ENTRY 0,38 0,13 (.015 .005) Mil-Spec Parts (Brass) Shell RoHS Compliant Mil-Spec Size Part Number Part Number Part Number DA DA19678-212 M85049/48-3-7F DA19678-38 DB DB19678-213 M85049/48-3-8F DB19678-53 DC DC19678-214 M85049/48-3-9F DC19678-85 DD DD19678-214 M85049/48-3-10F DD19678-55 No. of Shell Part Mil Spec Cable Locking Size Layout Number Part Number* Screws Included DA 15 DA19678-1 M85049/48-3-2F 2 DB 25 DB19678-2 M85049/48-3-3F 2 DC 37 DC19678-3 M85049/48-3-4F 3 DD 50 DD19678-4 M85049/48-3-5F 3 * Parts ordered with no suffix or "Z" suffix will be substituted with "F" suffix. A 0,38 (.015) 38,88 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500)) 12,70 (.500) 15,47 (.690) C 0,13 (.005) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,38 (.015) 7,51 (.296) 7,51 (.296) 7,51 (.296) 9,91 (.390) Brass 50 in. Gold over Copper DA19678-167 DA19678-168 DA19678-138 DA19678-161 F 0,38 (.015) 7.93 (.312) 20,22 (.796) 17,45 (.687) 17,45 (.687) G 0,98 (.035) 16,36 (.644) 16,36 (.644) 16,36 (.644) 17,63 (.694) 90 Entry #4-40 NC-2B THD. TWO MTG. HOLES E CABLE ENTRY A 2,77 0,25 (.109 .010) B F CABLE ENTRY G H C * Kit consists of 1 shell, 1 cable clamp, 1 screw, 1 nut, 2 rivnuts (assembled) Shell RoHS Compliant Size Part Number DE DE19977-72 DA DA19977-68 DB DB19977-69 DC DC19977-70 DD DC19977-71 Shell Part Mil Spec A Size Layout Number Part Number* 0,38 (.015) DE 9 DE19977-5 M85049/50-1F 30,56 (1.203) DA 15 DA19977-1 M85049/50-2F 38,89 (1.531) DB 25 DB19977-2 M85049/50-3F 52,78 (2.078) DC 37 DC19977-3 M85049/50-4F 69,04 (2.718) DD 50 DD19977-4 M85049/50-5F 66,68 (2.625) * Parts ordered with no suffix or "Z" suffix will be substituted with "F" suffix. B 0,38 (.015) 18,24 (.718) 12,70 (.500) 12,70 (.500)) 12,70 (.500) 15,47 (.690) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 8 Mil-Spec Parts (Brass) Mil-Spec Part Number Part Number M85049/50-6F DE19977-20 M85049/50-7F DA19977-6 M85049/50-8F DB19977-17 M85049/50-9F DC19977-18 M85049/50-10F DD19977-19 E 0,38 (.015) 11,10 (.437) 11,10 (.437) 11,10 (.437) 11,10 (.437) 14,28 (.562) F 0,38 (.015) 11,10 (.437) 11,10 (.437) 15,88 (.625) 20,63 (.812) 23,01 (.906) Brass 50 in. Gold over Copper DE19977-47 DE19977-40 DE19977-43 DE19977-45 DE19977-44 G 0,98 (.035) 11,89 (.468) 11,89 (.468) 11,89 (.468) 11,89 (.468) 13,47 (.531) H 7,14 (.281) 7,14 (.281) 7,14 (.281) 7,14 (.281) 8,71 (.343) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/26/09 7:52 AM Page 9 Plastic Backshell D Cannon D-Subminiature Accessories Snap-Together Metalized Plastic Metalized plastic backshells reduce EMI/RFI emissions. Metalized plastic provides a light weight solution. Includes integral strain relieving cable clamp. CABLE CLAMP CABLE GROUNDING TANG Product Features * Improves conformance to FCC DOC #20780 shielding requirements * No crimp ferrule tooling needed * Quick and simple assembly using snaptogether design feature * Non-metalized, non-shielded versions available Attenuation Curve Note: Cable grounding tang not available on DE size backshell. Specifications Attenuation: Temperature Range: dB kHz MHz MHz Materials and Finishes Material: Thermoplastic, UL 94V-0 rated Finish: Nickel over Copper -49 dB @ 100MHz -20 C to 80 C MHz Straight Exit C * Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws * Optional locking hardware sold separately, see page 10 D OH MAX E 16,990,30 (.669.012) A B Shell Comptuer Cable Size Layout Shielded Non-Shielded Gray Non-Shielded Black DE 9 DE121073-154 DE121073-159 DE121073-259 DA 15 DA121073-150 DA121073-155 DA121073-255 DB 25 DB121073-151 DB121073-156 DB121073-256 DC 37 DC121073-152 DC121073-157 DC121073-257 DD 50 DD121073-153 DD121073-158 DD121073-258 Ribbon Cable Shielded Non-Shielded Gray DE121073-164 DE121073-169 DA121073-160 DA121073-165 DB121073-161 DB121073-166 DC121073-162 DC121073-167 - A 0,15 (.006) 24,95 (.982) 33,30 (1.311) 47,00 (1.850) 63,45 (2.498) 61,10 (2.410) B 0,30 (.012) 30,81 (1.213) 39,09 (1.539) 53,01 (2.087) 69,29 (2.728) 66,90 (2.634) C 0,30 (.012) 23,70 (.933) 31,80 (1.252) 45,01 (1.772) 60,30 (2.374) 58,30 (2.295) D 0,30 (.120) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) oH Max. 7,32 (.288A 8,31 (.327) 10,52 (.414) 12,32 (.485) 13,00 (.512) 50 Exit D E * Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws * Optional locking hardware sold separately, see page 5 Shell Shielded Non-Shielded B C Size Layout Part # Part # Gray 0,30 (.012) 0,30 (.012) DE 9 DE121073-54 DE121073-59 35,99 (1.417) 22,00 (8.66) DA 15 DA121073-50 DA121073-55 44,29 (1.744) 27,31 (1.075) DB 25 DB121073-51 DB121073-56 57,99 (2.283) 41,00 (1.614) DC 37 DC121073-52 DC121073-57 74,50 (2.933) 57,51 (2.264) DD 50 DD121073-53 DD121073-58 72,97 (2.873) 54.99 (2.165) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 9 D 0,30 (.012) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) Cable Diameter Min. Max. 3,51 (.138) 7,49 (.295) 6,50 (.256) 8,99 (.354) 6,50 (.256) 11,00 (.433) 6,50 (.256) 11,00 (.433) 8,99 (.354) 13,00 (.512) D sub:Layout 1 3/24/09 12:37 PM Page 10 D Cannon D-Subminiature Accessories Plastic Backshell Locking Hardware for Snap -Together Plastic Backshell Recessed Jackscrew Thumbscrew Extended Jackscrew 13,50 (.531) 9,00 (.354) 4,50 (.177) DIA. 19,00 (.748) 4,30 9,00 (.169) (.354) #4-40 Threads 6,00 (.236) MIN. 50,00 (1.969) 4,30 (.169) #4-40 Threads 9,00 (.354) 6,00 (.236) #4-40 THREADS 6,00 (.236) MIN. 4,10 (.161) DIA. Materials and Finishes Part Number Material Finish 250-8501-004 250-8501-009 (M3) ,250-8501-010 (#4-40) 250-8501-013 Brass Brass Brass Nickel Nickel Nickel Quantity Required per Connector 2 2 2 Jackpost for In-Line Connections Rectangular Nut Jackpost Assembly Jackpost 11,00 (.433) 5,00 (.197) 4,60 (.189) 5,00 (.197) 1,81 (.075) #4-40 UNC-2B 6,00 (.236) 4,90 (.193) 3,00 (.118) MIN 6,00 (.236) #4-40 UNC-2B 5,00 (.197) (ACROSS FLATS) #4-40 UNC-2A Assembly consists of 1 rectangular nut, 1 jackpost, 1 # 4-40 lock washer. Part Number: Material: Finish: Quantity required per connector: Straight Exit - Metalized Plastic Low Cost D121073-19 Brass Nickel 2 50 POSITION IS MARKED "CANNON" ONLY C F B ITT CANNON OE D * Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 Part Number 980-2000-350 980-2000-351 980-2000-352 980-2000-353 980-2000-354 A A B C D oE F 30,91 (1.217) 39,24 (1.545) 53,09 (2.090) 69,44 (2.734) 67,18 (2.645) 39,29 (1.547) 38,23 (1.505) 42,04 (1.655) 46,48 (1.830) 47,12 (1.855) 16,26 (.640) 16,26 (.640) 18,03 (.710) 23,01 (.906) 23,88 (.940) 16,26 (.640) 16,26 (.640) 16,26 (.640) 16,26 (.640) 19,56 (.770) 10,16 (.400) 10,16 (.400) 13,26 (.522) 18,44 (.726) 18,44 (.726) 24,99 (.984) 33,32 (1.312) 47,17 (1.857) 63,50 (2.500) 61,11 (2.406) Materials and Finishes: Thermoplastic, UL 94V-0 rated, Nickel plated 10 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 11 Plastic Backshell D Cannon D-Subminiature Accessories Snap -Together Universal 42,50 (1.673). B DIA. MAX. CABLE ENTRY 39,50 (1.555). C D * 2-piece snap-together design for quick assembly. * Customer furnishes tie-wrap. Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Shell Part oB C D Size Layout Number max. 0,20 (.008) 0,20 (.008) DE 9 DE115339-20 7,01 (.276) 17,00 (.669) 19,51 (.768) DA 15 DA115339-21 9,60 (.378) 17,00 (.669) 27,79 (1.094) DB 25 DB115339-22 11,61 (.457) 17,00 (.669) 41,61 (1.638) DC 37 DC115339-23 13,00 (.512) 17,00 (.669) 59,99 (2.283) DD 50 DD115339-24 16,00 (.630) 19,81 (.780) 52,32 (2.060) Note: Part Numbers above replace the following part number series: DE110963-1 to DD110963-5 One-Piece Snap-Together A C 16,21 (.638) CLAMP, THERMOPLASTIC CLAMP, METAL * Low cost * Easy to assemble * Mounting hardware included * 2 thumbscrews, 2 cable clamps Materials and Finishes Backshell Material: Polypropylene Hardware Material: Steel Hardware Finish: Black Nickel Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DEBS-9 DABS-15 DBBS-25 DCBS-37 DDBS-50 11 D A 35,20 (1.386) 43,31 (1.705) 57,20 (2.252) 72,00 (2.83) 73,70 (2.90) E 48,00 (1.890) ITT CANNON C 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 62,00 (2.44) 63,70 (2.50) oD max. 5,69 (.224) 5,69 (.224) 6,50 (.256) 7,80 (.307) 8,20 (.322) E 27,51 (1.083) 31,19 (1.228) 38,30 (1.508) 43,08 (1.69) 48,04 (1.89) D sub:Layout 1 3/24/09 12:37 PM Page 12 D Cannon D-Subminiature Accessories Plastic Backshell One-Piece Plastic Straight Exit B * Kit consists of 1 shell, 1 cable clamp, 1 set screw * Mounting hardware included * 2 screws #4-24 x 5/16 long self tapping * Accommodates spring latches Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Hardware Material: Steel Hardware Finish: Chromate over Zinc G Cable Entry A C oE F Cable Entry Cable Entry D TWO SCREWS 4-24 X 5/16 long SELF-TAPPING Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51218 30,94 (1.218) 25,40 (1.000) DA 15 DA51210 39,27 (1.546) 25,40 (1.000) DB 25 DB51212 53,16 (2.093) 31,75 (1.250) DC 37 DC51214 69,44 (2.734) 38,10 (1.500) DD 50 DD51216 67,06 (2.640) 38,10 (1.500) C D oE 0,13 (.005) 0,38 (.015) 0,25 (.010) 24,99 (.984) 12,70 (.500) 7,14 (.281) 33,33 (1.312) 12,70 (.500) 9,14 (.360) 47,04 (1.852) 12,70 (.500) -- 63,50 (2.500) 12,70 (.500) -- 61,11 (2.406) 15,47 (.690) -- F 0,25 (.010) -- -- 12,52 (.493) 17,63 (.694) 18,64 (.734) G 0,25 (.010) -- -- 9.15 (.360) 9.15 (.360) 11,89 (.468) 90 Exit K Cable Entry A oH Cable Entry J B * Kit consists of 1 shell, 1 cable clamp, 1 set screw * Mounting hardware included * 2 screws #4-24 x 5/16 long self tapping Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Hardware Material: Steel Hardware Finish: Chromate over Zinc C Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51219 37,95 (1.494) 25,40 (1.000) DA 15 DA51211 46,28 (1.822) 25,40 (1.000) DB 25 DB51213 60,15 (2.368) 31,75 (1.250) DC 37 DC51215 76,43 (3.009) 38,10 (1.500) DD 50 DD51217 74,04 (2.915) 38,10 (1.500) 12 D C D oH 0,13 (.005) 0,38 (.015) 0,25 (.010) 24,99 (.984) 12,70 (.500) 7,14 (.281) 33,33 (1.312) 12,70 (.500) 9,14 (.360) 47,04 (1.852) 12,70 (.500) -- 63,50 (2.500) 12,70 (.500) -- 61,11 (2.406) 15,47 (.690) -- J 0,25 (.010) -- -- 12,52 (.493) 17,63 (.694) 18,64 (.734) K 0,25 (.010) -- -- 9.15 (.360) 9.15 (.360) 11,89 (.468) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/26/09 7:52 AM Page 13 Locking Hardware D Cannon D-Subminiature Accessories Screw Lock Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Rear Panel Mount Front Panel Mount Product Features * Ensures positive mating * Provides locking and latching for high vibration applications SCREW CLIP WITH THREAD D SUBMINATURE CONNECTOR PIN OR SOCKET NUT SCREW D SUBMINATURE CONNECTOR PIN OR SOCKET CLIP WITH THREAD MOUNTING PANEL NUT WASHER MOUNTING PANEL LOCK WASHER HEX NUT WASHER LOCK WASHER D SUBMINATURE CONNECTOR PIN OR SOCKET HEX NUT Male Screw Lock SCREW #4-40 UNC-2A THD A B C CLIP GAP * Kit consists of 1 screw and 1 clip * Order 2 per connector * Similar to M24308/25 Materials and Finishes Material: Finish: Shell Size DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DD DD DD DD Steel Trivalent Chromate over Zinc each P/N D20419 D20419-18 D20419-21 D20419-104 D20420 D20420-13 D20420-15 D20420-86 2 each P/N D20419-119 D20419-121 D20419-122 D20419-216 D20420-097 D20420-099 D20420-100 D20420-162 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com CLIP A 0,38(.015) 14,10 (.555) 14,10 (.555) 14,10 (.555) 14,10 (.555) 16,66 (.656) 16,66 (.656) 16,66 (.656) 16,66 (.656) B 0,2 (.010) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) 13 C 0,13 (.005) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) RoHS Compliant P/N each D20419-211 D20419-212 D20419-213 D20419-214 D20420-157 D20420-158 D20420-159 D20420-160 RoHS Compliant P/N 2 each D20419-218 D20419-219 D20419-220 D20419-221 D20420-163 D20420-164 D20420-165 D20420-166 D sub:Layout 1 4/1/09 10:23 AM Page 14 D Cannon D-Subminiature Accessories Locking Hardware Female Screw Lock Rear Panel Mount Front Panel Mount 6,35 (.250) APPROX. REMOVE ONE WASHER FOR EACH 0,76 (.030) OF PANEL THICKNESS WHEN REAR MOUNTING 1,52 (0.60) MAX. PANEL #4-40 NC-2B THD. 4,78 0,38 (.188 .015) Hex across Flats * Kit consists of 1 nut, 3 washer, 1 lock washer, 1 hex nut. * Order 2 per connector. A 4,78 0,38 (.188 .015) REAR FLANGE (REF.) #4-40 NC-2A THD Material: Finish: Steel Chromate over Cadmium (Mil Spec) or Zinc (RoHS) Yellow Chromate Over Cadmium each Kit of 2 each D20418-2 D20418-82 D20418-50 D20418-131 D20418-39 D20418-83 D20418-74 D20418-132 Chromate Over Zinc Kit of 2 each D20418-128 D20418-129 - NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. RoHS Compliant Part Number D20418-134 D20418-135 D20418-136 D20418-137 A 0,38 (.015) 7,92 (.312) 12,70 (.500) 15,88 (.625) 19,05 (.750) Mil-Spec Part Number M24308/26-1F M24308/26-2F - Screw Locks for Connectors with Integral Threaded Inserts 3,50 (.138) MIN THD A 5,75 (.226) Part Number D121073-39 D112041 * D121073-42 * without lock washer 4,50 (.177) 5,00 (.197) HEX (ACROSS FLATS) THD B 3,50 (.138) MIN THD A # 4-40 UNC-2B # 4-40 UNC-2B M3 Thread Type THD B # 4-40 UNC-2A # 4-40 UNC-2A M3 * Kit consists of 1 jackpost, 1 lock washer. * Order 2 per connector. Loose Spacer Part Number: 253-0343-000 (D*M Style) Dim A 5.84 .08 (.230 .003) Part Number: 253-0343-011 (D*MA Style) 9.40 .13 (.370 .005) Material: Finish: A .120 .116 Aluminum Chromate over Cadmium 14 .192 .182 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/26/09 7:52 AM Page 15 Locking Hardware D Cannon D-Subminiature Accessories Slide Lock Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. #4-40 HEX. NUT LOCK WASHER Product Features * Ensures positive mating * Provides locking and latching for high vibration applications SLIDE LATCH #4-40 SCREW FLAT WASHERS #4-40 POST LOCK WASHER HEX NUT Sliding Lock Retainer Assembly 2 SCREWS #4-40 NC-2A THREAD 2,84 (. 112) 3,66 0,38 (.144 .015) RETAINER SLIDING LOCK A 2,36 (.093) TRAVEL REF. C B * Kit consists of 1 sliding lock plate, 2 mounting screws, 2 lock washer, 2 hex nuts * Order 1 kit per connector Descriptions Sliding Lock Plate Screw, Mounting Washer Lock Nut, Hex Material Finish/ Treatment Stainless Steel Passivated Steel Steel Steel Trivalent Chromate over Zinc Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE51224-1 DA51220-1 DB51221-1 DC51222-1 DD51223-1 Slide Lock Post Assemblies A 0,38 (.015) 35,05 (1.380) 43,70 (1.720) 57,40 (2.260) 73,86 (2.908) 71,47 (2.814) SPACER WASHER B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 25,00 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) LOCK WASHER #4-40 HEX NUT 4,60 (.180) HEX * Consists of 1 post, 2 washers, 1 lock washer, and 1 hex nut.1 * Order 2 per connector.2 Part Number: Each1,2 D53018 D53018-14 Kit of 2 each D53018-11 D53018-20 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 2,59 (.102) 0,13 (.005) 10,57 (.416) 0,25 (.010) Material: Steel, Finish: Chromate/Zinc Material: Stainless Steel, Finish: Passivated 15 NOTE: When rear-mounting connector to a 1/16" panel, delete the second spacer washer. D sub:Layout 1 3/24/09 12:37 PM Page 16 D Cannon D-Subminiature Accessories Locking Hardware Spring Latch Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Locked Unlocked Product Features * Low Cost * Minimizes field connection time * Positive lock between connectors * Packaged 2 kits per bag Materials and Finishes Material: Stainless Steel Treatment: Passivated Spring Latch Plate Assembly #4-40 SCREW 15,37 0,64 (.605 .025) #4-40 THD. x 7,92 (.312) LONG SCREW 2,41 (.095) 1,52 (.060) A B LATCH PLATE #4-40 HEX. NUT CONNECTOR EITHER PIN OR SOCKET Shell Size DE, DA, DB, DC DD Layout 9,15, 25, 37 50 Part Number D110278 D110280 A 0,38 (.015) 12,42 (.489) 15,47 (.609) B 0,38 (.015) 14,35 (.565) 17,09 (.673) Part Number Kit of 2 each D110278-4 D110280-3 LOCK WASHER #4-40 HEX NUT * Kit consists of 1 plate, 1 screw, 1 lock washer,1 hex nut. * Order 2 kits per connector. Spring Latch Assembly SPRING LATCH 15,57 0,64 #4-40 SCREW #4-40 THD. x 7,92 (.312) LONG SCREW (.613 .025) B A C 2,41 (.095) 1,52 (.060) SPRING LATCH MOUNTING BRACKET #4-40 HEX. NUT CONNECTOR EITHER PIN OR SOCKET Shell Size DE, DA, DB, DC DD LOCK WASHER #4-40 HEX. NUT Layout 9,15, 25, 37 50 Part Number D110277 D110279 A 0,38 (.015) 12,42 (.489) 15,47 (.609) B 0,38 (.015) 14,35 (.565) 17,09 (.673) C 0,51 (.020) 18,59 (.732) 18,59 (.732) Part Number Kit of 2 each D110277-2 D110279-3 D110277-4 Rear panel mount version also available * Kit consists of 1 spring, 1 screw, 1 bracket, 1 lock washer, 1 hex nut. * Order 2 kits per connector. Front panel mounting. 16 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 17 Locking Hardware D Cannon D-Subminiature Accessories Jackscrew/Jackpost Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Jackscrew Assembly Jackpost Assembly HEAD, JACKSCREW # 2-56 UNC THD # 4-40 UNC THD # 4-40 UNC-2B THD RETAINING COMPOUND # 4-40 UNC-2A THD WASHER, #4 LOCK O 3,05 (.120) #4 HEX NUT STUD, JACKSCREW FEMALE POST O 3,05 (.120) Jackscrew Assembly 0,89 (.035) 0,13 (.005) 5,59 (.220) DIA. MAX. 9,40 (.370) MAX. 1,73 (.068) MAX. 16,26 (.640) MAX. * Kit consists of 2 studs, 2 heads, 1 tube retaining compound (US only) * Order one kit per connector Part Number: Materials and Finishes Material: Treatment: 4,57 (.180) MAX. D110550 #4-40 UNC THREAD 5,59 (.220) DIA. MAX. Stainless Steel Passivated 0,64 (.025) 0,13 (.005) Jackpost Assembly 4,75 (.187) HEX (ACROSS FLATS) CONNECTOR ASSY #4-40 UNC THREAD 5,84 (.230) 0,13 (.005) 14,10 (.555) 0,13 (.005) * Kit consists of 2 posts, 2 hex nuts, 2 lock washer * Order one kit per connector 1,14 (.045) 0,13 (.005) 5,59 (.220) MIN. PERFECT THD. PANEL 3,18 (.125) MAX. LOCK WASHER HEX NUT Part Number: Materials and Finishes Material: Treatment: Stainless Steel Passivated Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com #4-40 UNC THREAD D110551 NOTE: Jack post is not compatible with rear-panel mount connectors. 17 D sub:Layout 1 3/24/09 12:37 PM Page 18 Guide Pin Plate D Cannon D-Subminiature Accessories Guide Pin Plate Female 9,60 (.378) MAX MOUNTING PANEL A B E + + * Useful in blind mate applications. * Kit consists of 1 plate, 2 screws. * Guide pin inserts for Size 8 cavities for Combo D(R) connectors also available. Refer to Combo D Catalog. Part Number DE111920 DA22214 DB22254 DC22071 DD21961 A 0,41 (.016) 49,61 (1.953) 57,96 (2.282) 71,63 (2.820) 88,11 (3.469) 85,72 (3.375) B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,59 (3.094) 76,20 (3.000) F G + 1,57 (.062) 6,35 (.250) MAX. SOLDER POT EXTENSION C D 4,04 (.159) DIA. MIN. 2 PLACES MOUNTING HOLE #4.40 UNC-2B THREAD (SCREW SUPPORT) 2 PLACES Plate and Hardware Material: Steel Plate and Hardware Finish: Chromate over Zinc Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 + + F C 0,13 (.005) 25,00 (.986) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) E F 0,13 (.005) 0,13 (.005) 15,27 (.601) 9,52 (.375) 19,43 (.765) 9,52 (.375) 26,29 (1.035) 9,52 (.375) 34,52 (1.359) 9,52 (.375) 33,32 (1.312) 11,10 (.437) G 0,41 (.016) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 28,58 (1.125) 1,60 (.063) 0,41 (.016) RAD. 4 PLACES H J K 0,41 (.016) 0,41 (.016) 0,41 (.016) 30,58 (1.204) 12,29 (.484) 6,15 (.242) 38,91 (1.532) 12,29 (.484) 6,15 (.242) 51,21 (2.016) 11,91 (.469) 5,94 (.234) 67,49 (2.657) 11,91 (.469) 5,94 (.234) 65,10 (2.563) 14,30 (.563) 7,16 (.282) Recommended Panel Cutout K RADIUS 4,22 0,05 (.166 .002) DIA. 2 PLACES B E 3,66 0,13 (.144 .005) DIA. 2 PLACES + + + F + F + J D H 18 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 19 Guide Pin Plate D Cannon D-Subminiature Accessories Guide Pin Plate Male A 4,78 0,30 (.188 0.12) 6,35 (.250) MAX SOLDER POT EXTENSION B C 1,57 (.062) MAX. D 3,66 0,13 (.144 .005) 2 PLACES ITT CANNON 4,01 (.158) DIA. MAX. * Useful in blind mate applications. * Kit consists of 1 plate, 2 sems screws, 2 rivets, 2 guide pins, 2 washer * Guide pin inserts for Size 8 cavities for Combo D(R) connectors also available. Refer to Combo D Catalog. 4,06 (.160) REF DIA MAX. 1,57 0,13 (.062 .005) Part Number DE111919 DA22213 DB22255 DC22070 DD21962 A 0,41 (.016) 49,61 (1.953) 57,96 (2.282) 71,63 (2.820) 88,11 (3.469) 85,72 (3.375) B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,59 (3.094) 76,20 (3.000) G 4,06 0,25 (.160 .010) C 0,13 (.005) 33,91 (1.335) 42,24 (1.663) 55,96 (2.203) 72,42 (2.851) 69,82 (2.749) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) E F G H 0,13 (.005) 0,13 (.005) 0,41 (.016) 0,41 (.016) 25,40 (1.000) 19,05 (.750) 25,00 (.984) 12,29 (.484) 25,40 (1.000) 19,05 (.750) 33.32 (1.312) 12,29 (.484) 25,40 (1.000) 19,05 (.750) 47,04 (1.852) 12,29 (.484) 25,40 (1.000) 19,05 (.750) 63,50 (2.500) 12,29 (.484) 28,58 (1.125) 22,20 (.874) 61,11 (2.406) 15,06 (.593) Recommended Panel Cutout B C K RADIUS D + F H + + + + 3,66 0,13 DIA. (.144 .005) 2 PLACES + CL J Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com E CL 8,71 0,38 (.343 .015) 22,22 0,76 (.875 .030) Plate and Hardware Material: Steel Plate and Hardware Finish: Chromate over Zinc Guide Pin Material: Stainless Steel Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 F 19 5,54 0,13 DIA. (.218 .005) 2 PLACES J K 0,41 (.016) 0,41 (.016) 30,58 (1.204) 6,15 (.242) 38,89 (1.531) 6,15 (.242) 51,99 (2.047) 6,15 (.242) 68,25 (2.687) 6,15 (.242) 66,93 (2.635) 7,52 (.296) D sub:Layout 1 3/24/09 12:37 PM Page 20 D Cannon D-Subminiature Accessories Connector Saver High Reliability Connector Saver Engaging Face, Pin Side 21,95 0,51 (.864 .020) A B C 5,97 0,25 (.235 .010) 6,17 0,25 (.243 .010) CONTACT (SOCKET) 2X 11 9 CONTACT (PIN) SHELL PIN FRONT SPACER SHELL SOCKET FRONT NOTE: Hardware removed for clarity. Shell Size DE DA DB DC Layout 9 15 50 37 Part Number DEBMAM9PS DABMAM15PS DBBMAM25PS DCBMAM37PS A 0,40 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,25 (.010) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) C 0,25 (.010) 16,92 (.666) 25.25 (.994) 38,96 (1.534) 55,42 (2.182) DD 50 DDBMAM50PS 66,93 (2.635) 61,11 (2.406) 52,81 (2.079) Specifications Temperature: -55 C to 105 C Current Rating: 7 A Dielectric withstanding Voltage: 500 VAC at Sea Level Materials and Finishes Description Material Shells Steel Insulator White Thermoplastic, UL 94V-0 Contacts Copper Alloy Locking Hardware Stainless Steel 20 Finish Yellow Chromate over Zinc -- Gold Over Copper Passivated Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 21 D Cannon D-Subminiature Accessories Miscellaneous Polarizing Plates Polarizing Scheme Material: Black plastic, 94-V-O rated Part Number by Shell Size DE 115398 DA 115398-1 DB 115398-2 DC 115398-3 A B 1.208 (30.7) 1.535 (39,0) 2.082 (52,9) 2.726 (69,2) 0.629 (16) 0.629 (16) 0.629 (16) 0.629 (16) DD 115398-3 2.630 (66,8) 0.749 (19) Polarizing Keys Position 1 2 A B C D E F G H 3 4 5 6 7 8 9 10 Cut Key on pin connector Right Angle Brackets (Used with 90 Printed Circuit Connector D*M, D*, D*C,/D*U) Material: Black Polyester, UL-94V-0 Rated D*/D*M Shell Size DE DA DB DC Part Number 015-0338-000 015-0339-000 015-0340-000 015-0341-000 D*C/D*U DD 015-0342-000 A .015 1.224 (31.1) 1.552 (39.4) 2.092 (53.1) 2.740 (69.0) B .005 .984 (24.0) 1.312 (33.3) 1.852 (47.0) 2,500 (63.5) C .010 .340 (8.63) .340 (8.63) .340 (8.63) .340 (8.63) D .010 .484 (12.3) .484 (12.3) .484 (12.3) .484 (12.3) E .010 24.7 (6.27) 24.7 (6.27) 24.7 (6.27) 24.7 (6.27) F .010 .283 (7.2) .283 (7.2) .283 (7.2) .283 (7.2) 2.646 (67.2) 2.406 (61.1) .395 (10.0) .594 (15.1) .302 (7.67) .283 (7.2) Shell Size DE DA DB DC Part Number 015-0348-000 015-0349-000 015-0350-000 015-0351-000 A .015 1.224 (31.1) 1.552 (39.4) 2.092 (53.1) 2.740 (69.0) B .005 .984 (24.0) 1.312 (33.3) 1.852 (47.0) 2,500 (63.5) C .010 .340 (8.63) .340 (8.63) .340 (8.63) .340 (8.63) D 010 .484 (12.3) .484 (12.3) .484 (12.3) .484 (12.3) E .010 24.7 (6.27) 24.7 (6.27) 24.7 (6.27) 24.7 (6.27) F .010 .283 (7.2) .283 (7.2) .283 (7.2) .283 (7.2) DD 015-0352-000 2.646 (67.2) 2.406 (61.1) .395 (10.0) .594 (15.1) .302 (7.67) .283 (7.2) Wire Hole Fillers (D*MA Series Only) Material: Nylon Part Number DMA 51236-1 Insert Type Socket DMA 51235-1 Pin Pin Socket Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com Insert this end first From Terminal end of Connector 21 Cut Key on socket connector D sub:Layout 1 4/10/09 11:43 AM Page 22 Miscellaneous D Cannon D-Subminiature Accessories Dust Cap RAISED GATE MARK R. TYP. 6,35 (.250) A B ITT CANNON XX-XX-XX C Dust caps provide protection from moisture and dust for unused I/O ports. Product Features * Dust Caps meet the static decay test requirements of MIL-B- 81705C, Type II. * Dust Caps have an integral flange for easy application and removal Materials and Finishes Material: D 1,02 .04 WALL TYP. B NOTE: C dim. applies at point of maximum Integral interface length. Drawing shown for Black Anti-static caps. Dimensions shown are reference only. Black Antistatic Red Caps (Surface Resistivity <1x105 ohm/sq) (Surface Resistivity I.D. 105-1012 ohm/sq) Polyethylene DE-59-20BA DA-59-20BA DB-59-20BA DC-59-20BA DD-59-20BA DE-60-20BA DA-60-20BA DB-60-20BA DC-60-20BA DD-60-20BA DE-59-20RC DA-59-20RC DB-59-20RC DC-59-20RC DD-59-20RC DE-60-20RC DA-60-20RC DB-60-20RC DC-60-20RC DD-60-20RC Socket Socket Socket Socket Socket Pin Pin PIn Pin Pin A 20,32 (.800) 28,45 (1.120) 42,42 (1.670) 58,93 (2.320) 56,90 (2.240) 21,84 (.860) 30,48 (1.200) 44,20 (1.740) 60,71 (2.390) 58,17 (2.290) B 11,43 (.450) 11,68 (.460) 11,68 (.460) 11,68 (.460) 14,48 (.570) 12,95 (5.10) 12,95 (.510) 13,46 (.530) 13,46 (.530) 16.00 (.630) C 16,36 (.644) 24,59 (.968) 38,25 (1.506) 54,81 (2.158) 53,11 (2.091) 17,78 (.700) 26,52 (1.044) 39,60 (1.559) 56,90 (2.240) 54,28 (2.137) D 7,59 (2.99) 7,62 (.300) 7,49 (.295) 7,37 (.290) 10,41 (.410) 8,92 (.351) 9,02 (.355) 9,09 (.358) 9,37 (.369) 12.04 (.474) Interfacial Seal 10 TYP. A B Interfacial seals provide moisture resistance at the mating interface. Product Features * Other Interfacial Seals in the Combo D(R) layouts are available upon request. Material: Silastic Sheet 0,79 + 0,38 - 0.00 (.031 + .015 - .000) o 0,91 +_ 0,18 (.036 +_ .007) DIA. TYP. Shell Size DE DA DB DC DD DC DE DA DB DC DD Layout 9 15 25 37 50 21WA4 15 26 44 62 78 Part Number DE53750 DA53750-1 DB53750-2 DC53750-3 DD53750-4 075-0354-003 273-0333-000 273-0334-000 273-0335-000 273-0336-000 273-0337-000 A 16,66 (.656) 24,99 (.984) 38,88 1.531) 55,14 (2.171) 52,78 (2.078) 55,14 (2.171) 16,66 (.656) 24,99 (.984) 38,88 1.531) 55,14 (2.171) 52,78 (2.078) B 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) 11,10 (.437) 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) 11,10 (.437) Potting Shell 15,20 (.600) + + 4,70 (.185) 0,76 (.030) 3,25 (.128) DIA. Potting shells are molded with a thin flange 0,76 (.030) to permit the use of D Subminiature locking devices. Materials and Finishes Material: Color: Nylon Natural (white) Shell Size DE DA DB DC DD 22 Layout 9 15 25 37 50 Part Number DE50904-1 DA50905-1 DB50906-1 DC50907-1 DD50908-1 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 23 Index D Cannon D-Subminiature Accessories Standard RoHS Part # 075-0354-003 250-8501-004 250-8501-009 250-8501-010 250-8501-013 273-0333-000 273-0334-000 273-0335-000 273-0336-000 273-0337-000 980-2000-345 980-2000-346 980-2000-347 980-2000-348 980-2000-350 980-2000-351 980-2000-352 980-2000-353 980-2000-354 D110277 D110278 D110279 D110280 D110550 D110551 D121073-19 D121073-39 D121073-42 D20418-2 D20418-39 D20418-50 D20418-74 D20419 D20419-104 D20419-18 D20419-21 D20420 D20420-13 D20420-15 D20420-86 D53018 DA115339-21 DA121073-150 DA121073-50 DA19678-1 DA19977-1 DA20961 DA22213 Part # Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same D20418-134 D20418-136 D20418-135 D20418-137 D20419-211 D20419-214 D20419-212 D20419-213 D20420-157 D20420-158 D20420-159 D20420-160 Same Same Same Same DA19678-212 DA19977-68 DA20961-26 Same Page # 22 5 5 5 5 22 22 22 22 22 6 6 6 6 12 12 12 12 12 16 16 16 16 17 17 5 14 14 14 14 14 14 13 13 13 13 13 13 13 13 15 11 4 4 10 10 9 19 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com StandardRoHS Part # DA22214 DA24658 DA50905-1 DA51210 DA51211 DA51220-1 DA53750-1 DA-59-20 DA-60-20 DABMA15PS DABS-15 DB115339-22 DB121073-151 DB121073-51 DB19678-2 DB19977-2 DB20962 DB22254 DB22255 DB24659 DB50906-1 DB51212 DB51213 DB51221-1 DB53750-2 DB-59-20 DB-60-20 DBBMA25PS DBBS-25 DC115339-23 DC121073-152 DC121073-52 DC19678-3 DC19977-3 DC20963 DC22070 DC22071 DC24660 DC50907-1 DC51214 DC51215 DC51222-1 DC53750-3 DC-59-20 DC-60-20 DCBMA37PS DD115339-24 DD121073-153 Part # Same DA24658-28 Same Same Same Same Same Same Same Same Same Same Same Same DB19678-213 DB19977-69 DB20962-30 Same Same DB24659-27 Same Same Same Same Same Same Same Same Same Same Same Same DC19678-214 DC19977-70 DC20963-27 Same Same Same Same Same Same Same Same Same Same Same Same Same 23 Page # 18 9 22 12 12 15 22 22 22 20 11 9 4 4 10 9 10 18 19 9 22 12 12 15 22 22 22 20 11 11 4 4 9 9 9 19 18 7 22 12 12 15 22 22 22 20 11 4 StandardRoHS Part # Part # DD121073-53 DD19678-4 DD19977-4 DD20964 DD21961 DD21962 DD24661 DD50908-1 DD51216 DD51217 DD51223-1 DD53750-4 DD-59-20 DD-60-20 DDBMA50PS DE111919 DE111920 DE115339-20 DE121073-154 DE121073-54 DE19977-5 DE24657 DE44994 DE50904-1 DE51218 DE51219 DE51224-1 DE53750 DE-59-20 DE-60-20 DEBMA9PS DEBS-9 Same Same Same DD20964-32 Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same DE19977-72 DE24657-29 DE44994-14 Same Same Same Same Same Same Same Same Same Page # 4 10 10 9 18 19 9 22 12 12 15 22 22 22 20 19 18 11 4 4 10 9 9 22 12 12 15 22 22 22 20 11 D sub:Layout 1 3/24/09 12:37 PM Page 24 Product Safety and Warranty 1. M ATER IAL CO NTEN T AND P H YS IC AL F OR M Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. F IRE CH AR ACTE RISTIC S AND E LEC TRIC SH OC K HAZAR D Th er e i s n o fi r e h a za r d w he n t he c o nn e ct o r i s co rr ec t ly w ir ed a nd us ed w i th i n t he s pec if ie d pa r a me te rs . In c or re ct w ir i ng o r a ss em bl y o f t he c o nn e ct or or c a re le ss u se o f me t al t o o ls o r co n duc t iv e fl u ids , o r t r a n s i t d a m a g e t o an y o f t h e c o m p o n e n t p a r t s m a y c au s e e l e c t r i c s h o c k o r b u r n s . L i v e ci r cu i t s m u s t n o t b e b r o k e n b y s e p a r a t i n g m a t e d c o n n e c to r s a s t h i s m a y c a us e a r ci n g, i on i za t io n a n d bu rn i ng . Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HAN DL I NG Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DI SP OS AL Incineration of certain materials may release noxious or even toxic fumes. 5. AP P L IC ATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IM P OR TANT G ENERAL INF ORMATION (i ) Air an d c re epa g e pa t h s/Op er at i ng v o lt a g e . The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (i i ) Tem pe ra t ur e All information given are temperature limits. The operation temperature depends on the individual application. ( i i i ) O th e r i m p o r t a nt i n f o r m a ti o n Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. P r od uc t War ra n ty A limited warranty applies to Cannon products. In general, except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. Please refer to www.ittcannon.com (General Terms of Sale) for the complete text of Cannon's applicable Terms and Conditions, including Warranty. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. "Engineered for life" is a registered trademark of ITT Corporation (c)2006. All other trademarks or registered trademarks are property of their respective owners. All dates subject to change without notice. Commodities in this catalog may be controlled for export by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR) when specifically designed modified, or configured for articles controlled by the United States Government. ITT Interconnect Solutions, a Division of ITT Corporation manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. 24 www.ittcannon.com D sub:Layout 1 D 3/24/09 12:37 PM Page 25 Circular/Filter/Hermetic/Fiber Optic Connectors As a world leader in circular, filter, and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments. Our wide variety of fiber optic products include hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including MIL and ARINC standard solutions.ITT can meet numerous specs, including NATO and MIL standards. www.ittcannon.com/circulars * www.ittcannon.com/filter * www.ittcannon.com/hermetics * www.ittcannon.com/fiberoptics D-Subminiature Connectors Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. ITT D-Sub connectors are qualified to the MIL-DTL24308 specification. www.ittcannon.com/dsubs Microminiature Connectors Developed first by Cannon in the 1960' s, Interconnect Solutions microminiature connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular, and strip configurations for countless applications, many of our connectors meet or exceed applicable requirements of the MILDTL-83513 specification. www.ittcannon.com/micro Rack and Panel Connectors Initially pioneered by Cannon during the 1930s, Interconnect Solutions is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and insert arrangements, materials, plating, and contact options. Many of our standard and custom designs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards. www.ittcannon.com/rackandpanel RF Connectors ITT Interconnect Solutions has been providing interconnect products to the Microwave and RF industry since 1963 (formerly The Sealectro Corporation). The RF 50 & 75 Ohm product lines cover UHF band through Ku band requirements. These connectors and cable assemblies are available with a thread type, snap type, bayonet type or slide on coupling method. The frequencies range from DC to 18+ GHz. www.ittcannon.com/RF50 * www.ittcannon.com/RF75 Transportation The ITT ICS interconnect range includes sealed circular and rectangular connectors in metal or plastic shells. These configurations include board to cable or cable to cable/ bulkhead applications. Both signal and power contacts can be combined in various layouts. All product lines within the Transportation segment offer very low contact resistance providing maximum signal integrity. www.ittcannon.com/transportation ITT Interconnect Solutions is an international manufacturer and supplier of connectors including circular, rectangular, fiber optic, RF, power and high voltage, audio, PMCIA, Compact Flash Card, enclosures, cable assemblies, and application specific custom solutions. The Interconnect Solutions portfolio includes the brands Cannon, VEAM, and BIW. As a worldwide leader in connector technology for nearly a century, ITT offers one of the broadest product offerings, six sigma manufacturing capability, Value Based Product Development with exceptional engineering capability, and an extensive sales, distribution, and customer support network. D sub:Layout 1 3/24/09 12:37 PM Page 26 Customer Support Locations CHINA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 phone: +86.755.2726.7238 fax: +86.755.2726.7515 GERMANY Cannonstrasse 1 Weinstadt, 71384 phone: +49.7151.699.0 fax: +49.7151.699.217 FRANCE 15, Boulevard Robert Thiboust Serris, France 77700 phone: +33.1.60.04.93.93 fax: +33.1.60.04.93.90 HONG KONG Units 2405-6, 24/F, ING Tower 308 Des Voeux Road Central Hong Kong phone: +852.2732.2720 fax: +852.2732.2919 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 phone: +39.02938721 fax: +39.0293872300 JAPAN 11-3, 5 Chome,Hibarigaoka, Zama-shi Kanagawa, Japan 228-0003 phone: +81.462.57.2010 fax: +81.462.57.1680 UK Jays Close, Viables Estate Basingstoke, RG22 4BA phone: +44.1256.311200 fax: +44.1256.323356 USA 666 East Dyer Road Santa Ana, CA 92705 toll free: 1.800.854.3028 phone: +1.714.557.4700 fax: +1.714.628.2142 (c)2008 ITT Corporation. "Engineered for life" and "Cannon" are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. www.ittcannon.com