MCC 95 MCD 95 Thyristor Modules Thyristor/Diode Modules VRSM VDSM VRRM VDRM Type V 900 1300 1500 1700 1900 V 800 1200 1400 1600 1800 Version MCC 95-08 MCC 95-12 MCC 95-14 MCC 95-16 MCC 95-18 Symbol ITRMS = 2x 180 A 2x 116 A ITAVM = VRRM = 800-1800 V 1 1B io1B / io1B / io1B / io1B / io1B / 8B io8B io8B io8B io8B io8B Version MCD 95-08 MCD 95-12 MCD 95-14 MCD 95-16 MCD 95-18 Conditions 1B io1B / io1B / io1B / io1B / io1B / ITSM, IFSM 180 116 A A TVJ = 45C VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 2250 2400 A A TVJ = TVJM VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 2000 2150 A A TVJ = 45C VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 25 300 23 900 A2s A2s TVJ = TVJM VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 20 000 19 100 A2s A2s 150 A/s 500 A/s 1000 V/s 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ 2.5 - 4 2.5 - 4 Nm Nm 85 g I2t (di/dt)cr TVJ = TVJM repetitive, IT = 250 A f = 50 Hz; tp = 200 s; VD = 2/3 VDRM IG = 0.45 A diG /dt = 0.45 A/s non repetitive, IT = ITAVM (dv/dt)cr TVJ = TVJM; VD = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM; tp = 30 s IT = IT(AV)M; tp = 500 s PGAV VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. 3 6 7 4 5 8B io8B io8B io8B io8B io8B Maximum Ratings ITRMS, IFRMS TVJ = TVJM ITAVM, IFAVM TC = 85C; 180 sine 2 3 6 7 1 5 4 2 3 1 5 4 2 MCC Version 1 MCD Version 1 3 6 1 5 2 3 1 5 2 MCC Version 8 MCD Version 8 Features * International standard package, JEDEC TO-240 AA * Direct copper bonded Al2O3 -ceramic base plate * Planar passivated chips * Isolation voltage 3600 V~ * UL registered, E 72873 * Gate-cathode twin pins for version 1 Applications * DC Motor control * Softstart AC motor controller * Light, heat and temperature control Advantages * Space and weight savings * Simple mounting with two screws * Improved temperature & power cycling * Reduced protection circuits 20101116a 1-5 (c) 2010 IXYS All rights reserved http://store.iiic.cc/ MCC 95 MCD 95 Conditions 100 Characteristic Values typ. IRRM, IDRM VR / VD = VRRM / VDRM TVJ = TVJM VT, VF IT / IF = 300 A VT0 rt VGT tp = 30 s tp = 500 s max. 5 mA TVJ = 25C 1.5 V For power-loss calculations only TVJ = TVJM 0.8 2.4 V mW VG VD = 6 V VD = 6 V TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 2.5 2.6 150 200 V V mA mA [V] VGD IGD VD = 2/3 VDRM; TVJ = TVJM 0.2 10 V mA IL tp = 10 s; VD = 6 V IG = 0.45 A; diG /dt = 0.45 A/s TVJ = 25C 450 mA IH VD = 6 V; RGK = ; TVJ = 25C 200 mA tgd VD = 1/2VDRM IG = 0.45 A; diG /dt = 0.45 A/s TVJ = 25C 2 s tq VD = /3 VDRM dv/dt = 20 V/s; -di/dt = 10 A/s IT = 150 A; VR = 100 V; tp = 200 s TVJ = TVJM QS IRM IT / IF = 50 A; -di/dt = 6 A/s TVJ = TVJM RthJC per thyristor; DC current per module per thyristor; DC current per module RthJK dS dA a PGM = 120 W 60 W PGAV = 8 W 1 125C IGT 10 0.1 0.01 IGT (TVJ = -40C) IGT (TVJ = 0C) IGT (TVJ = 25C) 25C Symbol IGD 0.1 1 10 IG [A] Fig. 1 Gate trigger characteristics 100 2 185 other values see Fig. 8/9 Creeping distance on surface Creepage distance in air Maximum allowable acceleration 170 45 C A 0.22 0.11 0.42 0.21 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 Optional accessories for modules Coded gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = Right for pin pair 6/7) CSA class 5851, guide 460-1-1 IXYS reserves the right to change limits, test conditions and dimensions. TVJ = 25C s 10 tgd [s] limit 1 0.1 0.01 typ. 0.1 1 10 IG [A] Fig. 2 Gate trigger delay time 20101116a 2-5 (c) 2010 IXYS All rights reserved http://store.iiic.cc/ MCC 95 MCD 95 Dimensions in mm (1 mm = 0.0394") MCC... Version 1B MCD... Version 1B A 2.8 - 0.8 DIN 46244 92 0.5 92 0.5 80 0.3 4.4 25 0.3 5.5 0.1 6 10 0.1 14.8 10 M5 4.4 5 20.8 0.25 4.4 25 0.3 45 0.3 45 0.3 65 0.3 65 0.3 Optional accessories: Keyed gate/cathode twin plugs Wire length: 350 mm, gate = yellow, cathode = red UL 758, style 1385, CSA class 5851, guide 460-1-1 Type ZY 200L (L = Left for pin pair 4/5) Optional accessories: Keyed gate/cathode twin plugs Wire length: 350 mm, gate = yellow, cathode = red UL 758, style 1385, CSA class 5851, guide 460-1-1 Type ZY 200L (L = Left for pin pair 4/5) Type ZY 200R (R = Right for pin pair 6/7) MCC... Version 8B MCD... Version 8B A 2.8 - 0.8 DIN 46244 0.25 65 x 19 General tolerance: DIN ISO 2768 class c" General tolerance: DIN ISO 2768 class c" 92 0.5 92 0.5 80 0.3 5.5 0.1 10 M5 25 0.3 25 0.3 45 0.3 65 0.3 IXYS reserves the right to change limits, test conditions and dimensions. 6 6.9 10 0.1 14.8 6.9 6.9 6 20.8 0.25 10 M5 10 0.1 5.5 0.1 80 0.3 (c) 2010 IXYS All rights reserved 23.5 +0.4 28.5 65 x 19 0.25 7.5 - 01 30.2 +0.8 - 02 23.5 29.7 0.2 28.5 7.5 - 01 30.2 +0.8 - 02 +0.4 3.5 3.5 A 2.8 - 0.8 DIN 46244 29.7 0.2 5.5 0.1 14.8 10 M5 6 10 0.1 20.8 0.25 80 0.3 14.8 23.5 General tolerance: DIN ISO 2768 class c" General tolerance: DIN ISO 2768 class c" 20.8 0.25 29.7 0.2 +0.4 28.5 65 x 19 0.25 65 x 19 0.25 7.5 - 01 30.2 +0.8 - 02 23.5 29.7 0.2 28.5 7.5 - 01 30.2 +0.8 - 02 +0.4 3.5 3.5 A 2.8 - 0.8 DIN 46244 45 0.3 65 0.3 20101116a 3-5 MCC 95 MCD 95 3000 105 250 VR = 0 V 2500 2000 ITSM 1500 DC 180 sin 120 60 30 200 50 Hz 80% VRRM TVJ = 45C TVJ = 125C ITAVM 150 2 [A] It [A] 2 [A s] 100 TVJ = 45C 1000 50 500 TVJ = 125C 0 0.001 0.01 t [s] 0.1 104 1 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration 1 0 10 t [ms] 0 25 50 75 100 125 150 TC [C] Fig. 4a Maximum forward current at case temperature Fig. 4 I2t versus time (1-10 ms) 250 RthKA K/W 0.4 0.6 0.8 1 1.2 1.5 2 3 200 Ptot 150 [W] DC 180 sin 120 60 30 100 Fig. 5 Power dissipation versus on-state current & ambient temperature (per thyristor or diode) 50 0 0 50 100 150 0 50 100 150 Ta [C] ITAVM, IFAVM [A] 1000 RthKA K/W 0.03 0.06 0.08 0.12 0.15 0.3 0.5 800 Ptot 600 [W] 400 Circuit B6 3x MCC95 or 200 0 Fig. 6 Three phase rectifier bridge: Power dissipation vs. direct output current and ambient temperature 3x MCD95 0 100 200 IdAVM [A] 300 0 50 100 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2010 IXYS All rights reserved 150 Ta [C] 20101116a 4-5 MCC 95 MCD 95 1200 Circuit W3 3x MCC95 or 3x MCD95 1000 RthKA K/W 0.03 0.06 0.08 0.12 0.15 0.3 0.5 800 Ptot [W] Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature 600 400 200 0 0 50 100 150 IRMS [A] 200 250 0 50 Ta [C] 100 150 0.30 Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) 0.25 RthJC for various conduction angles d: 30 60 120 180 DC 0.20 ZthJC 0.15 [K/W] d DC 180 120 60 30 0.10 Constants for ZthJC calculation: 0.05 0.00 10-3 10-2 10-1 t [s] 100 101 102 0.5 [K/W] 30 60 120 180 DC 0.3 Rthi (K/W) 0.0066 0.0678 0.1456 ti (s) 0.0019 0.0477 0.344 RthJK for various conduction angles d: d DC 180 120 60 30 0.2 0.1 0.0 10-3 i 1 2 3 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) 0.4 ZthJK RthJC (K/W) 0.22 0.23 0.25 0.27 0.28 RthJK (K/W) 0.42 0.43 0.45 0.47 0.48 Constants for ZthJK calculation: 10-2 10-1 100 101 t [s] IXYS reserves the right to change limits, test conditions and dimensions. (c) 2010 IXYS All rights reserved 102 103 i 1 2 3 4 Rthi (K/W) 0.0066 0.0678 0.1456 0.2 ti (s) 0.0019 0.0477 0.344 1.32 20101116a 5-5