Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 1 EMIFILr (Inductor type) Chip Ferrite Bead BLM41P Series (1806 Size) c Dimensions c Equivalent Circuit 1.60.2 0.70.3 4.50.2 1.60.2 (Resistance element becomes dominant at high frequencies.) : Electrode (in mm) c Packaging Code Packaging Minimum Quantity L 180mm Embossed Tape 2500 K 330mm Embossed Tape 8000 B Bulk(Bag) 1000 c Rated Value (p: packaging code) Part Number BLM41PG600SN1p Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range 60ohm (Typ.) - 6000mA 0.009ohm max. -55 to +125C BLM41PG750SN1p 75ohm (Typ.) - 3500mA 0.015ohm max. -55 to +125C BLM41PG181SN1p 180ohm 25% - 3500mA 0.02ohm max. -55 to +125C BLM41PG471SN1p 470ohm 25% - 2000mA 0.05ohm max. -55 to +125C BLM41PG102SN1p 1000ohm 25% - 1500mA 0.09ohm max. -55 to +125C Number of Circuits: 1 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 2 Continued from the preceding page. c Derating of Rated Current In operating temperature exceeding +85C, derating of current is necessary for BLM41PG series. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current Rated Current (mA) 6000 3500 2000 1500 1000 0 0 85 125 Operating Temperature (C) c Impedance-Frequency Characteristics (Main Items) c Impedance-Frequency Characteristics (Main Items) BLM41PG Series (60ohm to 75ohm) BLM41PG Series (180ohm to 1000ohm) 1200 150 BLM41PG102SN1 BLM41PG750SN1 900 Impedance () Impedance () 100 BLM41PG600SN1 BLM41PG471SN1 600 BLM41PG181SN1 50 300 0 0 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 3 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLM41PG600SN1 BLM41PG750SN1 100 125 100 Z Impedance () Impedance () 75 R 50 X 25 0 Z 75 R 50 X 25 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 1000 3000 BLM41PG471SN1 250 600 200 Z Z 450 Impedance () Impedance () 100 Frequency (MHz) c Impedance-Frequency Characteristics BLM41PG181SN1 R 150 100 R 300 X 150 50 0 10 X 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM41PG102SN1 1200 Z Impedance () 900 600 R 300 0 X 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 4 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.7.5 http://www.murata.com/