DO NOT
SCALE FROM
THIS PRINT
.250 6.35
REF
(TYP)
2
MAX SWAY
"A"
"A"
IPT1-XX-D
.200 5.08
REF
((No OF POS x .1000 [2.540])
+ .0200[.508])
.010[.25]
.025
SQ REF
0.64
SEE NOTE 8
.100
REF
2.54
.060 1.52
(No OF POS -1) x .1000 [2.540]
(TYP)
2
MAX SWAY
01
02
C
L
IPT1-1XX-XX-XX-D-VS-XX-XX
No OF POS PER ROW
-02 THRU -25
ROW SPECIFICATION
-D: DOUBLE (USE IPT1-XX-D)
(SEE NOTE 11)
PLATING SPECIFICATION
-S: SELECTIVE, 30 Au / 50 Ni MIN
ON CONTACT, MATTE TIN TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN
ON CONTACT, MATTE TIN TAIL
MATTE TIN ON TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN
ON CONTACT, MATTE TIN TAIL
LEAD STYLE
-01
OPTION
-K: POLYIMIDE FILM PAD
[AVAILABLE ON POSITIONS -03 THRU
-25 ONLY]
-TR: TAPE AND REEL
-VS: VERTICAL SURFACE MOUNT
TAIL OPTION
-A: ALIGNMENT PIN (USE SM-A11) [4 POS MIN]
-LC: LOCKING CLIP (USE LC-07-TM) [4 POS MIN]
(SEE NOTE 10)
-FL: FRICTION LOCK [POS -05 THRU -25]
(USE IPT1-XX-D-FL-X & T-1S64-05-X)
-PL: POSITION #1 REMOVED
(USE IPT1-XX-D-P)
(SEE NOTE 12)
OPTION
.155
REF
3.94
(SEE NOTE 6)
.050
±.010
1.27
±0.25
.295
MAX
7.49
90°
-
0°
+
5°
SECTION "A"-"A"
T-1S6-25-X-2
SEE TABLE 1
.118
±.003
3.00
±0.08
.368
REF
9.35
IN-PROCESS
PACKAGING VIEW
TUBE: PT-1-24-01-103
PLUG: TP-09
[-02 POSITION TO BE
BULK PACKAGED]
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
-TR: TAPE & REEL PACKAGING OPTION
C
POS 1 (TOWARD
ROUND HOLE)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3]
2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY
BY:
IPT1-1XX-XX-XX-D-VS-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
11-06-2002
2
1
SHEET SCALE: 2.25:1
INSULATOR: LCP, UL 94 VO,
COLOR: BLACK
CONTACT: PHOS BRONZE, 510, 3/4 HARD
F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-VS-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE CUT FLASH: .010[.25].
3. MINIMUM TERMINALT PUSH OUT FORCE: 2 lbs.
4. MAXIMUM VARIATION BETWEEN PIN ROWS: .005[.13].
5. "END WALLS" AFTER CUTTING SHOULD BE .010+/-.003[.25+/-.08].
6. PINS TO BE FLUSH TO .008 [.20] MAXIMUM RECESSED IN BODY.
7. ALL DIMENSIONS TO BE ABOUT CENTERLINE WITHIN +/-.005[.13].
8. PRESENCE OF VOIDS IS OPTIONAL AND PATTERN TO WHICH THEY
OCCUR IS VARIABLE.
9. NOTE DELETED.
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
11. STANDARD BODIES CAN BE CUT TO POSITION. FOR -LC, -FL & -PL
OPTIONS, BODIES MUST BE MOLDED TO POSITION.
12. FOR EXISTING CUSTOMERS ONLY, -POL CAN BE SUBSTITUED FOR -PL.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION X
19
20
01
02
IPT1-XX-D-P
IPT1-XX-D-FL-X
T-1S64-05-X
.105 2.67
.010
REF
0.25
(No OF POS -2) x .1000[2.540]
.056
REF
1.42
LC-07-TM
.105 2.67
(No OF POS -2) x .1000[2.540]
.063
REF
1.59
SM-A11
"R" REF (SEE NOTE)
.2362
±.0050
5.999
±0.127
.018
±.010
0.46
±0.25
"S" (SEE NOTE)
[AVAILABLE ON POSITIONS -03 THRU -25 ONLY]
NOTE: "R" = USE MEASURED DIMENSION
"S" = (("R" - .2362[6.000] / 2)
.020[.51]
.305 7.75
-K: POLYIMIDE FILM PAD OPTION
IPT1-110-01-X-D-VS-LC-FL SHOWN
-LC: LOCKING CLIP OPTION
-PL: POLARIZED OPTION
IPT1-110-01-X-D-VS-PL SHOWN
IPT1-110-01-X-D-VS-FL SHOWN
-FL: FRICTION LOCK OPTION
-A: ALIGNMENT PIN OPTION
IPT1-110-01-X-D-VS-A SHOWN
SHEET OF
.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY
BY:
IPT1-1XX-XX-XX-D-VS-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
11-06-2002
2
2
SHEET SCALE: 2.25:1
REVISION X
F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-VS-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
