https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through header, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Solder/Slip-on connection, color: green, contact surface: Tin, mounting: Direct mounting, pin layout: Linear pinning, solder pin [P]: 9.4 mm The figure shows a 10-position version of the product Your advantages Free choice - permanent solder connection or standardized slip-on connection Cable connection on the inside of the device enables flexible positioning of the panel feed-through Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918051020 Weight per Piece (excluding packing) 2.570 g Custom tariff number 85366990 Country of origin Poland Technical data Item properties Brief article description Feed-through header Plug-in system MINI COMBICON Type of contact Male connector Range of articles DFK-MC 1,5/..-GF Pitch 3.81 mm 09/26/2020Page1/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Technical data Item properties Number of positions 2 Connection method Solder/Slip-on connection Mounting type Direct mounting Pin layout Linear pinning Locking Threaded flange Number of levels 1 Number of connections 2 Number of potentials 2 Electrical parameters Nominal current 8A Nom. voltage 160 V Max. current slip-on connection 8A Rated voltage 160 V Rated voltage (III/2) 160 V Rated voltage (II/2) 320 V Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Connection capacity Connection method Solder/Slip-on connection pluggable Yes Conductor cross section solid 0.14 mm ... 1.5 mm Conductor cross section flexible 0.14 mm ... 1.5 mm Conductor cross section AWG / kcmil 28 ... 16 Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface contact area (top layer) Tin (5 - 7 m Sn) Metal surface contact area (middle layer) Nickel (2 - 3 m Ni), Metal surface soldering area (top layer) Tin (5 - 7 m Sn) Metal surface soldering area (middle layer) Nickel (2 - 3 m Ni) Material data - housing Housing color green (6021) Insulating material PA 09/26/2020Page2/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Technical data Material data - housing Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 16.2 mm Width [ w ] 22.01 mm Height [ h ] 20.4 mm Pitch 3.81 mm Height (without solder pin) 11 mm Solder pin [P] 9.4 mm Pin dimensions 0.8 x 2.8 mm Dimensions of slip-on connection 2,8 x 0,8 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. Ambient conditions Ambient temperature (storage/transport) -40 C ... 70 C Ambient temperature (assembly) -5 C ... 100 C Ambient temperature (operation) -40 C ... 100 C (dependent on the derating curve) Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.14 mm / solid / > 7 N 0.14 mm / flexible / > 7 N 1.5 mm / solid / > 40 N 1.5 mm / flexible / > 40 N Mechanical tests according to standard Test specification IEC 61984 Visual inspection IEC 60512-1-1:2002-02 09/26/2020Page3/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Technical data Mechanical tests according to standard Dimension check IEC 60512-1-2:2002-02 Resistance of inscriptions IEC 60068-2-70:1995-12 Insertion and withdrawal force IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 7N Withdraw strength per pos. approx. 4N Polarization and coding IEC 60512-13-5:2006-02 Contact holder in insert IEC 60512-15-1:2008-05 Test force per pos. 25.5 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 1.5 mm Minimum clearance - inhomogeneous field (III/2) 1.5 mm Minimum clearance - inhomogeneous field (II/2) 1.5 mm Minimum creepage distance value (III/3) 2 mm Minimum creepage distance value (III/2) 1.5 mm Minimum creepage distance value (II/2) 1.6 mm Current carrying capacity / derating curves Caption Type: MC 1,5/...-STF-3,81 with DFK-MC 1,5/...-GF-3,81 (with flat plug) Specification IEC 61984:2008-10 Reduction factor 0.8 Note Representation based on IEC 60512-5-2:2002-02 For number of positions, see diagram Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 7N Withdraw strength per pos. approx. 4N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 2.2 m Insertion/withdrawal cycles 25 Contact resistance R2 2.2 m 09/26/2020Page4/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Technical data Durability tests (B) Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV Insulation resistance, neighboring positions 31T Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 16 Conductor cross section 1.5 mm Test current 8 ADC Upper limiting temperature requirements <100 C Test passed Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 C/2 h Thermal stress 100 C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 C/1 cycle Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV 3 3 Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 09/26/2020Page5/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Drilling diagram Dimension b: 6.19 mm + (no. of pos. x 3.81 mm) Dimension c: Dim. b + 4.7 mm 09/26/2020Page6/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Diagram Type: MC 1,5/...-STF-3,81 with DFK-MC 1,5/...-GF-3,81 (with flat plug) Diagram Type: MC 1,5/...-STF-3,81 with DFK-MC 1,5/...-GF-3,81 (with solder connection) 09/26/2020Page7/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Dimensional drawing Classifications eCl@ss eCl@ss 10.0.1 27440402 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141134 eCl@ss 8.0 27440402 eCl@ss 9.0 27440402 ETIM ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC002637 ETIM 6.0 EC002637 ETIM 7.0 EC002637 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121410 09/26/2020Page8/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Classifications UNSPSC UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals CSA / IECEE CB Scheme / VDE Gutachten mit Fertigungsuberwachung / EAC / cULus Recognized Ex Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ Nominal voltage UN 150 V Nominal current IN 8A IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 160 V Nominal current IN 8A mm/AWG/kcmil 0.2-1.5 VDE Gutachten mit Fertigungsuberwachung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 160 V 13631 DE1-60987-B1B2 40011723 09/26/2020Page9/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Approvals Nominal current IN 8A mm/AWG/kcmil 0.2-1.5 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-20110128 B D Nominal voltage UN 300 V 300 V Nominal current IN 8A 8A Accessories Accessories Coding element Coding profile-CP-MSTB-1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material Labeled terminal marker Marker card-SK 3,81/2,8:FORTL.ZAHLEN-0804109 Marker card, Card, white, labeled, horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 3.81 mm, lettering field size: 3.81 x 2.8 mm Mounting material 09/26/2020Page10/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Accessories Screw set-DFK-MC SS-0710015 Screw set, for securing the header to the housing wall, consists of M2 x 8 screw, spring washer and nut, 1 piece each Screwdriver tools Screwdriver-SZS 0,4X2,5 VDE-1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip Additional products Printed-circuit board connector-MCVR 1,5/ 2-STF-3,81-1828346 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin Printed-circuit board connector-QC 0,5/ 2-STF-3,81-1897542 PCB connector, nominal current: 6 A, rated voltage (III/2): 200 V, nominal cross section: 0.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Displacement connection, color: green, contact surface: Tin Printed-circuit board connector-FK-MCP 1,5/ 2-STF-3,81-1851232 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Push-in spring connection, color: green, contact surface: Tin 09/26/2020Page11/12 https://www.phoenixcontact.com/us/products/1829345 Feed-through header-DFK-MC 1,5/ 2-GF-3,81-1829345 Accessories Printed-circuit board connector-MCVW 1,5/ 2-STF-3,81-1828498 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin Printed-circuit board connector-MC 1,5/ 2-STF-3,81-1827703 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin Printed-circuit board connector-MCC 1/ 2-STZF-3,81-1852367 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1 mm, number of positions: 2, pitch: 3.81 mm, connection method: Crimp connection, color: green, Corresponding female crimp contacts with current [A] and conductor cross section range [mm] data: 5A/MCC-MT 0,2-0,35 (1859988); 8A/MCC-MT 0,5-1,0 (1859991) Printed-circuit board connector-FRONT-MC 1,5/ 2-STF-3,81-1850851 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm, number of positions: 2, pitch: 3.81 mm, connection method: Front screw connection, color: green, contact surface: Tin Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 09/26/2020Page12/12