PNP Power Darlington Transistor Pin Configuration: 1. Emitter 2. Collector 3. Base Absolute Maximum Ratings Parameter Symbol BD682 Collector Base Voltage VCBO Collector Emitter Voltage VCEO Emitter Base Voltage VEBO 5 Collector Current IC 4 Base Current IB 0.1 Total Power Dissipation at Ta = 25C Derate above 25C 100 Unit V A 1.25 10 W mW/C 40 0.32 W W/C Tj, Tstg -55 to +150 C Junction to Case Rth (j-c) 3.13 Junction to Ambient in Free Air Rth (j-a) 100 Total Power Dissipation at TC = 25C Derate above 25C Operating and Storage Junction Temperature Range PD Thermal Resistance C/W www.element14.com www.farnell.com www.newark.com Page <1> 20/12/12 V1.0 PNP Power Darlington Transistor Electrical Characteristics (Tc = 25C unless specified otherwise) Parameter Symbol Test Condition Min. Max. Unit Collector Emiiter Voltage VCEO* IC = 50mA, IB = 0 100 - V Collector Cut off Current ICEO ICBO 500 0.2 A mA 2 mA 2 mA 2.5 V VCE = Half Rated VCEO, IB = 0 VCB = Rated VCBO, IE = 0 - ICBO VCB = Rated VCBO, IE = 0 TC = 100C IEBO VEB = 5V, IC = 0 - Collector Emitter Saturation Voltage NON A VCE (sat)* IC = 1.5A, IB = 6mA - Base Emitter On Voltage NON A VEB (on)* IC = 1.5A, VCE = 3V - DC Current Gain NON A hFE* IC = 1.5A, VCE = 3V 750 - - |hfe| IC = 1.5A, VCE = 3V f = 1MHz 1 - - Emitter Cut off Current Small Signal Current Gain *Pulse Test : Pulse Width = 300s, Duty Cycle = 2%. Dimensions Min. Max. A 7.4 7.8 B 10.5 10.8 C 2.4 2.7 D 0.7 0.9 E F Pin Configuration: 1. Emitter 2. Collector 3. Base 2.25 (Typical) 0.49 0.75 G 4.5 (Typical) L 15.7 (Typical) M 1.27 (Typical) N 3.75 (Typical) P S 3 3.2 2.5 (Typical) Dimensions : Millimetres Part Number Table Description Part Number Darlington Transistor, TO-126 BD682 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 20/12/12 V1.0