Demonstration and Evaluation Boards
Interface Products
Aug 2007
Evaluation/Demo Board List
OM# Description
OM6270 SPI/I2C to UART Bridge Demoboard (SC16IS750)
OM6271 SPI to I2C Master Bridge Demoboard (SC18IS600)
OM6272 UART to I2C Master Bridge Demoboard (SC18IM700)
OM6273 SPI/I2C to Dual UART/IRDA/GPIO Demoboard (SC16IS752)
OM6275 I2C 2005-1 Demo Board (15 I2C devices w/USB control & GUI)
OM6276 PCA9633 Demo Board (Four Color PWM LED Control)
OM6277 PCA9564 Eval Board (I2C Master)
OM6278 I2C 2002-1A Eval Board (11 I2C devices w/printer port control & GUI)
OM6279 LED Dimmer Demo Board
OM6285 I2C 2002-1A Eval Board (without/printer port control & GUI)
OM10088 PCF8562 LCD Segment Display
More information: www.standardics.nxp.com/support/boards
Contact us: interface.support @ nxp.com or i2c.support @ nxp.com
Experience the variety of I²C peripherals with
the latest I²C Training Board
Fifteen different I²C devices on one board allows easy experimentation and training.
(PCA9531, PCA9536, PCA9538, PCA9540B, PCA9541, PCA9543A, PCA9551, PCF8563, PCF8574, PCF85116-3, SA56004,
SE98)
Add Extra I/O Ports, Temperature Sensors, LED Drivers, Real-time Clock, I²C Bus
Switching
USB Connection to trial version (only devices on board and that fixed address is
operational) Graphics Interface for Windows PC/Laptop
www.standardics.nxp.com/support/boards/i2c20051/
Target Board & USB based GUI (400 kHz) #OM6275
Get the color right with the single chip
four color LED driver (R G B ?)
Individual PWM for each component color, to set your perfect color
– 25 mA per pin
Global PWM, to set your perfect overall brightness or blink LEDs
I²C interface for easy connection to Micro or Baseband IC
– High drive on I²C bus for multiple devices or long distances
www.standardics.nxp.com/support/boards/pca9633/
Demo Board with on board micro #OM6276
– Highlights PCA9633 and LPC900 MCU
– On-board FETs can sink 300mA per LED
Blink an LED without bit banging
Dim and LED with burning a PWM on the MCU
Two PWMs to map across 2,4,8,16 outputs
– 25 mA per pin
I²C interface for easy connection to Micro or Baseband IC
Demo Board with on board micro #OM6279
– PCA9533, PCA9531
– On-board NXP MCU demonstrates capabilities
–www.standardics.nxp.com/support/boards/leddemo
Easily drive a LCD Segment Display with a very
small MCU and PCF8562
Good for a User Interface at the front panel of a system
Scalable to match the complexity of the LCD display
Simple code using industry-standard 8051 core
Easily reprogram micro via USB adapter (#OM10083)
http://www.teamfdi.com/products/lcddemo/lcddemo.shtml
Demo Board with on board micro #OM10088
MCU
PCF
8562
LCD
Driver
LCD
“Glass”
I²C
COG is an option
Need a “fresh” I²C Master ?
NXP has three different options.
Connect to a MCU’s 8-bit peripheral port
– PCA9564 I²C Bus Controller
–http://www.standardics.nxp.com/support/boards/pca9564/
– Demo Board with two on board micros #OM6277
Connect to a MCU’s SPI port
– SC18IS600 SPI to I²C Master + GPIO Bridge
– Demo Board #OM6271
Connect to an extra Async port from MCU or Single Board Computer or ?
– SC18IM700 Async to I²C Master + GPIO Bridge
– Demo Board #OM6272
SPI to I²C Master Async to I²C Master
8 bit to I²C Bus Controller
Break out of “Pin Mux Jail”
Use what you have to make what you need
Add new Async ports using available interfaces on MCUs, ASSPs, SoCs
Code examples for NXP ARM7 MCUs
Fast! Up to 5Mbps… perfect for Bluetooth 2.0 w/EDR
Connects to MCU as a I²C Slave or SPI Slave
Many add extra General Purpose I/O
Dual Channel Demo Board #OM6273
– Features SC16IS752
Single Channel Demo Board #OM6270
– Features SC16IS750
I²C or SPI to Dual Async incl. RS-485 Support
www.standardics.nxp.com/support/boards/sc16is7xx/
Train on many I²C peripherals using parallel
printer port to PC
Eleven different I²C devices on one board allows easy experimentation and
training (LM75A, P82B96/PCA9600, PCA9501, PCA9515, PCA9543, PCA9550, PCA9551, PCA9554, PCA9555, PCA9561, PCF8582C-2)
Add Extra I/O Ports, Temperature Sensors, LED Drivers, I²C Bus Switching
I²C Bus adapter uses parallel printer port for connection to full version (all
devices and addresses operational) of Graphics Interface for Windows
PC/Laptop
www.standardics.nxp.com/support/boards/i2c20021/
Target Board plus parallel printer port control (100 kHz) & GUI #OM6278
Target Board only #OM6285
New generation of interface solutions for managing communication
among various bus interfaces
Purpose : Overcome the limitation of the host bus interface to peripherals
Benefit :
– Greater design flexibility
– Ability to retain original design investment
– Faster time to market
– Link legacy and new systems and vice versa
UART
I2C
SPI
UART
I2C
SPI
IrDA
GPIO
Product focus – UART/I2C/SPI Bridge
Competitive advantages:
-First in the market with broad portfolio of high
speed serial bridge solutions.
-Soul sourced on most products
-Small packaging (4x4 HVQFN) ideal for
handheld
-Low power
-Industrial Temperature at commercial pricing
NXP Bridge
Customer benefits:
-Serial (SPI/I2C/UART) interface simplifies host
connection.
-Greater design flexibility
-Ability to retain original design investment
-Faster time to market
-Link legacy and new systems and vice versa
-Additional GPIO provides broader usage of
ports.
Ideal for:
-All types of applications
Wherever UART/SPI or I2C port expansion is
required
-Protocol conversion
- Link legacy and new systems
- Mobile Handheld, GPS, PDP, Telecom
Networking, Satellite radio, Car Infotainment
Product highlights:
-New : Sc16IS602 : I2C to SPI master and GPIO.
-New : WinCE driver for SC16IS7xx bridges
Leading in
miniaturisation
high speed
low power
NXP Bridge IC – Demo Board Kits
I2C/SPI slave to UART UART to I2C master SPI to I2C master
SC16IS7xx SC18IM700 SC18IS600
•Sample code: RS232
and NXP I2C devices
•User Manual
Kits include
Key Benefit
Easy interface to
UART host and
various I2C and
GPIO devices. On-
board I2C EEPROM
and I2C LED Dimmer
•Sample code: SPI
and NXP I2C devices
•User Manual
Kits include
Key Benefit
Easy interface to SPI host
and various I2C and GPIO
devices. On-board I2C
EEPROM and I2C LED
Dimmer
•Sample code: RS232,
RS485, and IrDA
•User Manual
Kits include
Key Benefit
Easy interface to
I2C/SPI host and IrDA,
RS232/RS485, and
GPIO devices.
Selectable I2C or SPI-
bus interface
OM6270 – SC16IS750
OM6273 – SC16IS752 OM6271 OM6272
•Sample code: I2C
and NXP SPI devices
•User Manual
Kits include
Key Benefit
Easy interface to I2C
host and SPI and GPIO
devices.
Up to 4 SPI chip selects
OM6274
I2C to SPI master
SC18IS602
