GU (General Use) Type [2-Channel (Form A) Type] 6.4 .252 3.90.2 .154.008 9.78 .385 9.78 .385 6.4 .252 3.60.2 .142.008 mm inch FEATURES 1. Compact 8-pin DIP size The device comes in a compact (W) 6.4 x (L) 9.78 x(H) 3.9 mm (W) .252x(L) .385x(H) .154 inch, 8-pin DIP size (through hole terminal type). 2. Applicable for 2 Form A use as well as two independent 1 Form A use 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. High sensitivity, high speed response Can control a maximum 0.13 A load current with a 5 mA input current. Fast operation speed of 310 s (typical). (AQW214) 5. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes whereas the PhotoMOS relays has only 100 pA even with the rated load voltage of 400 V (AQW214). PhotoMOS RELAYS 6. Low-level thermal electromotive force (Approx. 1 V) 7. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 8. Stable ON resistance. 9. Eliminates the need for a power supply to drive the power MOSFET TYPICAL APPLICATIONS * High-speed inspection machines * Telephones equipment * Computer TYPES 1. AC/DC type Output rating* Load voltage 60V 100 V 200 V 350 V 400 V 600 V Load current 350 mA 300 mA 160 mA 120 mA 100 mA 40 mA Part No. Through hole Surface-mount terminal terminal Tube packing style Tape and reel packing style AQW212 AQW212A AQW212AX AQW212AZ AQW215 AQW215A AQW215AX AQW215AZ AQW217 AQW217A AQW217AX AQW217AZ AQW210 AQW210A AQW210AX AQW210AZ AQW214 AQW214A AQW214AX AQW214AZ AQW216 AQW216A AQW216AX AQW216AZ Packing quantity Tube Tape and reel 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. AC/DC type 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A) IF 50 mA VR 3V f = 100 Hz, Duty factor = 0.1% Peak forward current IFP 1A Power dissipation Load voltage (peak AC) Pin 75 mW VL 60 V 100 V 200 V 350 V 400 V 600 V IL 0.35 A (0.40A) 0.30 A (0.35 A) 0.16 A (0.2 A) 0.12 A (0.14 A) 0.10 A (0.13 A) 0.04 A (0.05 A) Peak load current Ipeak 1.0 A 0.9 A 0.48 A 0.36 A 0.3 A 0.12 A Power dissipation Total power dissipation Pout PT 800 mW 850 mW I/O isolation voltage Viso 1,500 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F Continuous load Output current Temperature limits Remarks ( ): in case of using only 1 channel A connection: Peak AC, DC A connection: 100 ms (1 shot), VL = DC Between input and output/ between contact sets Non-condensing at low temperatures 471 AQW21 2. Electrical characteristics (Ambient temperature: 25C 77F) Item LED operate current LED turn off current Input LED dropout voltage On resistance Output Transfer characteristics Typical Maximum Minimum Typical Typical Maximum Typical Maximum Off state leakage Maximum current Typical Turn on time* Maximum Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/C isolation Minimum resistance Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A) Condition 0.9 mA IFon IL = Max. 3 mA 0.4 mA IFoff IL = Max. 0.8 mA 1.14 V (1.25 V at IF = 50 mA) VF IF = 5 mA 1.5 V 0.83 2.3 11 23 30 70 IF = 5 mA Ron IL = Max. 2.5 4.0 15 35 50 120 Within 1 son time IF = 0 1 A ILeak VL = Max. 0.65 ms 0.60 ms 0.25 ms 0.25 ms 0.31 ms 0.28 ms IF = 5 mA Ton IL = Max. 2 ms 2 ms 1.0 ms 0.5 ms 0.5 ms 0.5 ms 0.08 ms Toff Ciso 0.06 ms 0.05 ms 0.05 ms 0.2 ms 0.8 pF 1.5 pF 0.05 ms IF = 5 mA IL = Max. f = 1 MHz VB = 0 1,000 M Riso 0.04 ms 500 V DC *Turn on/Turn off time Input 90% Output 10% Ton Toff For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 445. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) On resistance vs. ambient temperature characteristics 2.-(2) On resistance vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 500 AQW212 300 200 100 AQW215 AQW217 AQW210 AQW214 120 100 4 AQW215 3 2 AQW212 1 On resistamce, Load current, mA 400 On resistamce, 5 AQW216 80 60 AQW214 40 AQW210 20 AQW216 0 -40 -20 472 8085 100 0 20 40 60 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 AQW217 -40 -20 0 20 40 60 8085 Ambient temperature, C AQW21 3. Turn on time vs. ambient temperature characteristics 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 1.5 AQW212,AQW215 1.0 AQW214 0.3 0.2 AQW212,215 AQW216,210,217 0.1 0.5 LED operate ourrent, mA 0.4 Turn off time, ms Turn on time, ms 2.0 4 3 2 1 AQW216,AQW210,AQW217 0 -40 -20 0 20 40 60 0 8085 -40 -20 0 20 AQW214 40 60 0 8085 -40 -20 Ambient temperature, C Ambient temperature, C 0 20 40 60 8085 Ambient temperature, C 6. LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics 8.-(1) Voltage vs. current characteristics of output at MOS portion Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 0.5 4 3 2 Current, A 1.5 LED dropout voltage, V LED turn off current, mA 5 1.4 1.3 1.2 -0.2 -0.3 1.0 0 20 40 60 8085 Ambient temperature, C 8.-(2) Voltage vs. current characteristics of output at MOS portion Current, mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F -0.4 -40 -20 -0.5 0 20 40 60 8085 Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 1.2 AQW217 160 AQW210 AQW214 120 80 AQW216 40 1 -40 2 3 4 5 Voltage, V -80 10-3 1.0 10-6 10-9 AQW212,AQW215 0.6 AQW210,AQW216,AQW217 AQW216 0.2 AQW214 10-12 -160 -200 0 20 60 40 80 Load voltage, V 100 0 10 20 30 40 50 LED forward current, mA 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 200 Output capacitamce, pF 0.12 0.10 AQW212 Turn off time, ms 0.8 0.4 AQW214 -120 0.08 AQW215 0.06 AQW216 AQW210,217 0.04 AQW214 150 100 AQW216,AQW210 AQW217 AQW214 AQW212 AQW215 50 0.02 0 10 20 30 40 50 LED forward current, mA 9/1/2000 Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 200 -5 -4 -3 -2 -1 0 10. LED forward current vs. turn on time characteristics Turn on time, ms -20 Off state leakage current, A -40 0.2 0 0.2 0.4 0.6 0.8 1.0 -0.1 Voltage, V 50mA 30mA 20mA 10mA 5mA 1.1 0 AQW212 AQW215 0.3 0.1 -1.0 -0.8 -0.6 -0.4 -0.2 1 0 0.4 0 0 10 20 30 40 50 Applied voltage, V All Rights Reserved, (c) Copyright Matsushita Electric Works, 473 Ltd. Go To Online Catalog