SMCJ5.0(C)A - SMCJ170(C)A
SMCJ5.0(C)A-SMCJ170(C)A, Rev. B
SMCJ5.0(C)A - SMCJ170(C)A
1500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
1998 Fairchild Semiconductor Corporation
Symbol Parameter Value Units
PPPM Peak Pul se P ower Dissipation on 10/1000 µs waveform minimum 1500 W
IPPM Peak Pul se Current on 10/1000 µs waveform see table A
if(surge) Peak Forward Surge Current
superimposed on rated load (JEDEC method) (Note 1) 200 A
Tstg Storage Temperat ure Range -55 to +150 °C
TJOperating Juncti on Temperature -55 to +150 °C
Features
•Glass passivated junction.
•1500 W Peak Pulse Power capability
on 10/1000 µs waveform.
•Excellent clamping capability.
•Low incremental surge resistance.
•Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
•Typical IR less than 1.0 µA above 10V.
DEVICES FOR BIPOLAR APPLICA TIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
21
0.320 (8.12 8)
0.305 (7.74 7)
0.280 (7.11 2)
0.260 (6.60 4)
0.103 (2.61 6)
0.079 (2.00 7)
0.245 (6.22 3)
0.220 (5.58 8)
0.008 (0.20 3)
0.004 (0.10 2) 0.012 (0.305)
0.006 (0.152)
0.060 (1.52 4)
0.030 (0.76 2)
0.124 (3.15 0)
0.108 (2.74 3)
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
SMC/DO-214AB
COLOR BAND DENOTES CATHODE
EXCEPT BIPOLAR
SMCJ5.0(C)A - SMCJ170(C)A
SMCJ5.0(C)A-SMCJ170(C)A, Rev. B
Transient Voltage Supressors
(continued)
Electrical Characteristics TA = 25°C unless otherwise noted
Uni-directional
Bi-direction al (C)
Device
Part
Marking Reverse
Stand-off Voltage
VRWM (V)
Breakdown Volt age
VBR (V)
min max
Test
Current
IT (mA)
Max Clamping
Voltage @IPPM
VC (V)
Max Peak Pulse
Surge Cu rr ent
IPPM (A)
Max Reverse
Leakage VRWM
IR (uA)*
SMCJ5.0(C)A GDE 5.0 6.40 7.0 10 9.2 163.0 1000
SMCJ6.0(C)A GDG 6.0 6.67 7.37 10 10.3 145.6 1000
SMCJ6.5(C)A GDK(BDK) 6.5 7.22 7.98 10 11.2 133.9 500
SMCJ7.0(C)A GDM 7.0 7.78 8.60 10 12.0 125.0 200
SMCJ7.5(C)A GDP(BDP) 7.5 8.33 9.21 1 12.9 116.3 100
SMCJ8.0(C)A GDR(BDR) 8.0 8.89 9.83 1 13.6 110.3 50
SMCJ8.5(C)A GDT(BDT) 8.5 9.44 10.4 1 14.4 104.2 20
SMCJ9.0(C)A GDV(BDV) 9.0 10.0 11.1 1 15.4 97.4 10
SMCJ10(C)A GDX(BDX) 10 11.1 12.3 1 17.0 88.2 5
SMCJ11(C)A GDZ 11 12.2 13.5 1 18.2 82.4 5
SMCJ12(C)A GEE(BEE) 12 13.3 14.7 1 19.9 75.3 5
SMCJ13(C)A GEG 13 14.4 15.9 1 21.5 69.8 5
SMCJ14(C)A GEK(BEK) 14 15.6 17.2 1 23.2 64.7 5
SMCJ15(C)A GEM(BEM) 15 16.7 18.5 1 24.4 61.5 5
SMCJ16(C)A GEP 16 17.8 19.7 1 26.0 57.7 5
SMCJ17(C)A GER 17 18.9 20.9 1 27.6 54.3 5
SMCJ18(C)A GET(BET) 18 20.0 22.1 1 29.2 51.4 5
SMCJ20(C)A GEV(BEV) 20 22.2 24.5 1 32.4 46.3 5
SMCJ22(C)A GEX(BEX) 22 24.4 26.9 1 35.5 42.3 5
SMCJ24(C)A GEZ(BEZ) 24 26.7 29.5 1 38.9 38.6 5
SMCJ26(C)A GFE(BFE) 26 28.9 31.9 1 42.1 35.6 5
SMCJ28(C)A GFG(BFG) 28 31.1 34.4 1 45.4 33.0 5
SMCJ30(C)A GFK(BFK) 30 33.3 36.8 1 48.4 31.0 5
SMCJ33(C)A GFM(BFM) 33 36.7 40.6 1 53.3 28.1 5
SMCJ36(C)A GFP(BFP) 36 40.0 44.2 1 58.1 25.8 5
SMCJ40(C)A GFR(BFR) 40 44.4 49.1 1 64.5 23.3 5
SMCJ43(C)A GFT(BFT) 43 47.8 52.8 1 69.4 21.6 5
SMCJ45(C)A GFV 45 50.0 55.3 1 72.7 20.6 5
SMCJ48(C)A GFX 48 53.3 58.9 1 77.4 19.4 5
SMCJ51(C)A GFZ 51 56.7 62.7 1 82.4 18.2 5
SMCJ54(C)A GGE 54 60.0 66.3 1 87.1 17.2 5
SMCJ58(C)A GGG 58 64.4 71.2 1 93.6 16.0 5
SMCJ60(C)A GGK 60 66.7 73.7 1 96.8 15.5 5
SMCJ64(C)A GGM 64 71.1 78.6 1 103.0 14.6 5
SMCJ70(C)A GGP 70 77.8 86.0 1 113.0 13.3 5
SMCJ75(C)A GGR 75 83.3 92.1 1 121.0 12.4 5
SMCJ78(C)A GGT 78 86.7 95.8 1 126.0 11.9 5
SMCJ85(C)A GGV 85 94.4 104.0 1 137.0 10.9 5
SMCJ90(C)A GGX 90 100.0 111.1 1 146.0 10.3 5
SMCJ100(C)A GGZ 100 111.0 123.0 1 162.0 9.3 5
SMCJ110(C)A GHE 110 122.0 135.0 1 177.0 8.5 5
SMCJ120(C)A GHG 120 133.0 147.0 1 193.0 7.8 5
SMCJ130(C)A GHK 130 144.0 159.0 1 209.0 7.2 5
SMCJ150(C)A GHM 150 167.0 185.0 1 243.0 6.2 5
SMCJ160(C)A GHP 160 178.0 197.0 1 259.0 5.8 5
SMCJ170(C)A GHR 170 189.0 209.0 1 275.0 5.5 5
* For bidirectional parts with VRWM<10V, the IR max limit is doubled.
SMCJ5.0(C)A - SMCJ170(C)A
SMCJ5.0(C)A-SMCJ170(C)A, Rev. B
Transient Voltage Supressors
(continued)
Typical Characteristics
Pul se De ratin g Curve
0 25 50 75 100 125 150 175 200
0
25
50
75
100
AM BI ENT TEMPERATURE ( C )
PULSE PO WER ( %)
º
Non -Repetit ive Surge Cu rre nt
12 51020 50100
10
20
50
100
200
N UMB E R OF CYCL E S AT 6 0Hz
FORWARD SURGE CURRENT (A)
T = T max
8.3m s Single Half Sine-Wave
JEDEC Method
A A
Peak Pulse Po wer R at ing Curve
0.0001 0.001 0.01 0.1 1 10
0.1
1
10
100
PULSE WIDTH (ms)
P ULS E POWER (kW)
T = 25 C
º
A
Junction Capacitance
1 5 10 50 100 200 400
10
100
1000
10000
20000
REVERSE VOLTAGE (V)
CAPACI TANCE (pF)
T = 25 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
Measured at
Zero Bias
Measured at
Stand-Off
Voltage (V mw)
Pulse Wav eform
01234
0
50
100
150
TIME (ms)
PE AK PULSE C URR ENT (% )
T = 25 C
º
A
Pulse Widt h (td) is Def ined
as the Po int W here the P eak
Current Decays to 50% of Ipp
10/1000µs ec Wavefor m
as Defined by R.E.A.
tf = 10µsec
e-kt
Pea k V alue
Ippm
Half Value-Ip p
2
td
SMC/DO-214AB (FS PKG Code P7)
SMC/DO-214AB Package Dimensions
August 1999, Rev. A
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.21
21
0.320 (8.128)
0.305 (7.747)
0.280 (7.112)
0.260 (6.604)
0.103 (2.616)
0.079 (2.007)
0.245 (6.223)
0.220 (5.588)
0.008 (0.203)
0.002 (0.51)
0.012 (0.305)
0.006 (0.152)
0.060 (1.524)
0.030 (0.762)
0.128 (3.25)
0.108 (2.743)
+
6.18
5.98
3.27
3.07
4.69
4.49
7.67
7.47
Minimum Recommended
Land Pattern
TRADEMARKS
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.
As used herein:
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
UHC™
VCX™
