AWU6601 HELP3 Band 1 / WCDMA / TD-SCDMA 3.4 V / 28.25 dBm Linear PA Module TM Data Sheet - Rev 2.4 FEATURES * HSPA Compliant * InGaP HBT Technology * Simpler Calibration with only 2 Bias Modes * Low Quiescent Current: 9 mA * Low Leakage Current in Shutdown Mode: <1 A * Internal Voltage Regulator * Integrated "daisy chainable" directional couplers with CPLIN and CPLOUT Ports * Optimized for a 50 System * * AWU6601 Low Miniature Surface Mount Package RoHS Compliant Package, 260 oC MSL-3 M45 Package 10 Pin 3 mm x 3 mm x 1 mm Surface Mount Module WCDMA/HSPA Mode * High (R99 waveform) 40 % @ POUT = +28.25 dBm 25 % @ POUT = +17 dBm Low Quiescent Current: 9 mA and standby time. The self-contained 3 mm x 3 mm x 1 mm surface mount package incorporates matching networks optimized for output power, and linearity in a 50 system. TD-SCDMA Mode 36 % @ POUT = +27 dBm 20 % @ POUT = +16 dBm APPLICATIONS * Wireless Handsets and Data Devices for * WCDMA/HSPA IMT-Band * TD-SCDMA 1.8/2.0 GHz Band GND at Slug (pad) PRODUCT DESCRIPTION The AWU6601 HELP3 PA is a 3rd generation WCDMA product for UMTS handsets. This PA incorporates ANADIGICS' HELP3 TM technology to provide low power consumption without the need for an external voltage regulator. A "daisy chainable" directional coupler is integrated in the module thus eliminating the need of external couplers. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. There are two for selectable bias modes that optimize different output power levels, and a shutdown mode with low leakage current, which increases handset talk VBATT 1 RFIN 2 VMODE2 (N/C) 3 VMODE1 VEN 10 VCC TM 10/2011 9 RFOUT 8 CPLIN 4 7 GND 5 6 CPLOUT CPL Bias Control Voltage Regulation Figure 1: Block Diagram AWU6601 VBATT 1 10 RFIN 2 9 RFOUT VMODE2 (N/C) 3 8 CPLIN VMODE1 4 7 GND VEN 5 6 CPLOUT Figure 2: Pinout (X-ray Top View) Table 1: Pin Description PIN NAME DESCRIPTION 1 VBATT Battery Voltage 2 RFIN RF Input 3 2 VMODE2 (N/C) No Connection Mode Control Voltage 1 4 VMODE1 5 VEN 6 CPLOUT 7 GND Ground 8 CPLIN Coupler Input 9 RFOUT RF Output 10 VCC PA Enable Voltage Coupler Output Supply Voltage Data Sheet - Rev 2.4 10/2011 VCC AWU6601 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Battery Voltage (VBATT) 0 +6 V Control Voltages (VMODE1, VENABLE) 0 +3.5 V RF Input Power (PIN) - +10 dBm -40 +150 C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1920 1880 2010 - 1980 1920 2025 MHz Supply Voltage (VCC) +3.2 +3.4 +4.2 V POUT < +28.25 dBm Enable Voltage (VENABLE) +2.15 0 +2.4 0 +3.1 +0.5 V PA "on" PA "shut down" Mode Control Voltage (VMODE1) +1.6 0 +2.4 0 +3.1 +0.5 V Low Bias Mode High Bias Mode 27.75(1) 26.75(1) 16.5(1) 15.5(1) 28.25 27.25 17 16 28.25 27.25 17 16 dBm 3GPP TS 34.121-1, Rel 8 Table C.11.1.3, Subtest 1 RF Output Power (POUT), TD-SCDMA TD-SCDMA (HPM) TD-SCDMA (LPM) 26.5 15.5 27 16.0 27 16.0 dBm 3GPP TS 25.62 Section 6.2.1 Case Temperature (TC) -30 - +90 C RF Output Power (POUT) R99 WCDMA, HPM HSPA (MPR=0), HPM R99 WCDMA, LPM HSPA (MPR=0), LPM COMMENTS UMTS Band 1 TD-SCDMA Band TD-SCDMA Band The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) For operation at Vcc = +3.2 V, Pout is derated by 0.5 dB. 3 Data Sheet - Rev 2.4 10/2011 AWU6601 Table 4: Electrical Specifications - UMTS/WCDMA Mode (TC = +25 C, VCC = +3.4 V, VBATT = +3.4 V, VENABLE = +2.4 V, 50 system, R99 waveform) PARAMETER MIN TYP MAX UNIT Gain 25 11.5 27.5 13.5 29.5 16 ACLR1 at 5 MHz offset (1) - -41 -44 ACLR2 at 10 MHz offset - POUT VMODE1 dB +28.25 dBm +17 dBm 0V 2.4 V -37 -38 dBc +28.25 dBm +17 dBm 0V 2.4 V -55 -55 -48 -48 dBc +28.25 dBm +17 dBm 0V 2.4 V 36 21 40 24 - % +28.25 dBm +17 dBm 0V 2.4 V Quiescent Current (Icq) Low Bias Mode - 9 13 mA VMODE1 = +2.4 V Mode Control Current - 0.3 0.5 mA through VMODE pin, VMODE1 = +2.4 V Enable Current - 0.3 0.5 mA through VENABLE pin BATT Current - 2.5 5 mA through VBATT pin, VMODE1 = +2.4 V Leakage Current - <1 5 A VBATT = +4.2 V, VCC = +4.2 V, VENABLE = 0 V, VMODE1 = 0 V Noise in Receive Band (2) - -137 -143 -135 -138 dBm/Hz Harmonics 2fo 3fo, 4fo - -42 -50 -35 -35 dBc Input Impedance - - 2:1 VSWR Coupling Factor - 19 - dB Directivity - 19 - dB Coupler IN-OUT Daisy Chain Insertion Loss - <0.25 - dB 698 MHz to 2620 MHz Pin 8 to 6 Shutdown Mode POUT < +28.25 dBm In-band load VSWR < 5:1 Out-of-band load VSWR < 10:1 Applies over all operating conditions Power-Added Efficiency (1) Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure Phase Delta (HPM-LPM) - - -70 dBc 8:1 - - VSWR - 10 - Deg Notes: (1) ACLR and Efficiency measured at 1950 MHz. (2) Noise measured at 2110 MHz to 2170 MHz. 4 COMMENTS Data Sheet - Rev 2.4 10/2011 POUT < +28.25 dBm, VMODE1 = 0V POUT < 17 dBm, VMODE1 = +2.4 V POUT < +28.25 dBm Applies over full operating range AWU6601 Table 5: Electrical Specifications - TD-SCDMA Mode (TC = +25 C, VCC = +3.4 V, VBATT = +3.4 V, VENABLE = +2.4 V, 50 system) PARAMETER MIN TYP MAX UNIT Gain 25 11.5 27.5 13.5 - ACLR1 at 1.6 MHz offset - -42 -42 ACLR2 at 3.2 MHz offset - COMMENTS POUT VMODE1 dB +27 dBm +16 dBm 0V 2.4 V -38 -38 dBc +27 dBm +16 dBm 0V 2.4 V -55 -55 -48 -48 dBc +27 dBm +16 dBm 0V 2.4 V 33 18 36 20 - % +27 dBm +16 dBm 0V 2.4 V Quiescent Current (Icq) Low Bias Mode - 9 12 mA VMODE1 = +2.4 V Mode Control Current - 0.3 0.5 mA through VMODE pin, VMODE1 = +2.4 V Enable Current - 0.3 0.5 mA through VENABLE pin, VEN = +2.4 V BATT Current - 2.5 5 mA through VBATT pin, VMODE1 = +2.4 V Leakage Current - <1 5 A VBATT = +4.3 V, VCC = +4.3 V, VENABLE = 0 V, VMODE1 = 0 V Harmonics 2fo 3fo, 4fo - - -35 -35 dBc Input Impedance - - 2:1 VSWR 8:1 - - VSWR Power-Added Efficiency (without DC/DC Converter) Load mismatch stress with no permanent degradation or failure 5 Data Sheet - Rev 2.4 10/2011 POUT < +27 dBm Applies over full operating range AWU6601 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VENABLE and VMODE1 voltages. Bias Modes The power amplifier may be placed in either a Low Bias mode or a High Bias mode by applying the appropriate logic level (see Operating Ranges table) to VMODE1. The Bias Control table lists the recommended modes of operation for various applications. VMODE2 is not necessary for this PA. Two operating modes are available to optimize current consumption. High Bias/High Power operating mode is for POUT levels > 16 dBm. At around 17 dBm output power, the PA should be "Mode Switched" to Medium/Low power mode for lowest quiescent current consumption. Table 6: Bias Control (WCDMA/UMTS) POUT LEVELS BIAS MODE VENABLE VMODE1 VCC VBATT UMTS - high power (High Bias Mode) > +16 dBm High +2.4 V 0V 3.2 - 4.2 V > 3.2 V UMTS - med/low power (Low Bias Mode) < +17 dBm Low +2.4 V +2.4 V 3.2 - 4.2 V > 3.2 V Optional lower VCC in low power mode < +7 dBm Low +2.4 V +2.4 V 1.5 V > 3.2 V - Shutdown 0V 0V 3.2 - 4.2 V > 3.2 V APPLICATION Shutdown Table 7: Bias Control (TD-SCDMA) POUT LEVELS BIAS MODE VENABLE VMODE1 VCC VBATT TD-SCDMA - high power (High Bias Mode) > +15 dBm High +2.4 V 0V 3.2 - 4.2 V > 3.2 V TD-SCDMA - med/low power (Low Bias Mode) < +16 dBm Low +2.4 V +2.4 V 3.2 - 4.2 V > 3.2 V - Shutdown 0V 0V 3.2 - 4.2 V > 3.2 V APPLICATION Shutdown 6 Data Sheet - Rev 2.4 10/2011 AWU6601 CHARACTERIZATION DATA (WCDMA Rel 99, VCC = 3.4 V, VEN = 2.4 V, T = 25 8C) Figure 4: Current vs Output Power Figure 3: Gain vs Output Power 550 30 500 25 400 Current (mA) Gain (dB) 1920MHz 1950MHz 1980MHz 450 1920MHz 1950MHz 1980MHz 20 15 10 350 300 250 200 150 100 5 50 0 0 -10 -5 0 5 10 15 20 25 -10 30 -5 0 5 -30 1920MHz 1950MHz 1980MHz -40 25 30 1920MHz 1950MHz 1980MHz -50 ACLR2 (dBc) -45 -45 -50 -55 -60 -55 -60 -65 -70 -65 -75 -70 -10 -5 0 5 10 15 20 25 30 Pout (dBm) -80 -10 -5 0 5 10 Pout (dBm) Figure 7: Efficiency vs Output Power 45 40 35 1920MHz 1950MHz 1980MHz 30 PAE (%) 20 -40 -35 25 20 15 10 5 0 -10 -5 0 5 10 15 20 25 30 Pout (dBm) 7 15 Figure 6: ACLR2 (10 MHz offset) vs Output Power Figure 5: ACLR1 (5 MHz offset) vs Output Power ACLR1 (dBc) 10 Pout (dBm) Pout (dBm) Data Sheet - Rev 2.4 10/2011 15 20 25 30 AWU6601 CHARACTERIZATION DATA (HSPA, Rel 8, VCC = 3.4 V, VEN = 2.4 V, T = 25 8C) Figure 8: Gain vs Output Power Figure 9: Current vs Output Power 30 550 500 25 1920MHz 1950MHz 1980MHz 450 400 1920MHz 1950MHz 1980MHz 350 Current (mA) Gain (dB) 20 300 15 250 200 10 150 100 5 50 0 0 -10 -5 0 5 10 15 20 25 -10 30 -5 0 5 Pout (dBm) Figure 10: ACLR1 (5MHz offset) vs Output Power -40 -30 15 20 25 30 Figure 11: ACLR2 (10MHz offset) vs Output Power -45 -35 1920MHz 1950MHz 1980MHz 1920MHz 1950MHz 1980MHz -50 ACLR2 (dBc) ACLR1 (dBc) -40 -55 -45 -60 -50 -65 -55 -70 -60 -75 -65 -10 -5 0 5 10 Pout (dBm) 15 20 25 30 -80 -10 Figure 12: Efficiency vs Output Power 40 35 30 1920MHz 1950MHz 1980MHz PAE (%) 25 20 15 10 5 0 -10 8 10 Pout (dBm) -5 0 5 10 Pout (dBm) 15 20 25 30 Data Sheet - Rev 2.4 10/2011 -5 0 5 10 Pout (dBm) 15 20 25 30 AWU6601 VBATT VCC C6 2.2 F C1 33 pF C2 0.1 F GND at slug 1 2 RFIN VMODE1 VEN 10 VBATT VCC RFIN RFOUT 9 3 VMODE2 (N/C) CPLIN 8 4 VMODE1 GND 7 5 VEN CPLIN CPLOUT 6 VCC GND GND VBATT Figure 13: Evaluation Board Schematic RFIN RFOUT C3 C2 C1 C4 CPLOUT VMODE1 VEN GND GND VMODE2 C5 CPLIN Figure 14: Evaluation Board Layout 9 Data Sheet - Rev 2.4 10/2011 C4 68 pF RFOUT CPLOUT C5 0.01 F C6 C3 2.2 Fceramic AWU6601 The AWU6601 power amplifier module is based on ANADIGICS proprietary HELP3TM technology. The PA is designed to operate up to 17 dBm in the low power mode, thus eliminating the need for three gain state, while still maintaining low quiescent current and high efficiency in low and medium power levels. The PA can still be operated as 3 gain state device if the customer chooses to. The directional "daisy chainable" coupler is integrated within the PA module, therefore there is no need for external couplers. AWU6601 requires only two calibration sweeps for system calibration, thus saving calibration time. Figure 16 shows one application example on mobile board. C1 and C2 are RF bypass caps and should be placed nearby pin 1 and pin 10. Bypass caps C9 and C5 may not be needed. Also a "T" matching topology is recommended at PA RFIN and RFOUT ports to provide matching between input TX Filter and Duplexer / Isolator. The AWU6601 has an integrated voltage regulator, which eliminates the need for an external constant voltage source. The PA is turn on/off is controlled by VEN pin. A single VMODE control logic (VMODE1) is needed to operate this device. 31.5 mA Average Current over Current DG09 Profile Figure 15: PDF and 500 0.150 0.140 DG09 PDF 0.130 AWU6601 (mA) 0.120 400 0.110 350 0.100 DG09 PDF The DG09 power distribution (fig 15) highlights the need to improve the current consumption in low and medium power level. The AWU6601 is designed to operate up to 17 dBm in the low power mode with very low quiescent current. Current consumption for AWU6601 is also plotted in the figure 5. 450 300 0.090 0.080 250 0.070 200 0.060 0.050 150 0.040 100 0.030 0.020 50 0.010 0.000 0 -60 -50 -40 -30 -20 -10 0 10 20 Antenna Power (dBm) VBATT C6 GND C1 GND RFIN C7 C8 TX filter L2 BB VBATT VCC RFIN RFOUT VMODE2 (N/C) CPL IN VMODE1 C9 GND C2 GND at slug VEN GND GND C4 L1 50 GND GND GND PA_R1 PA_R0 PA_0N To Detector C5 GND Figure 16: Typical Application Circuit 10 Data Sheet - Rev 2.4 10/2011 RFOUT Duplexer CPLOUT (N/C) C10 30 AWU6601 Current (mA) HELP3 AWU6601 PACKAGE OUTLINE Figure 17: M45 Package Outline - 10 Pin 3 mm x 3 mm x 1 mm Surface Mount Module Pin 1 Identifier Date Code YY=Year; WW=Work week 6601R Part Number LLLLNN YYWWCC Lot Number Country Code (CC) Figure 18: Branding Specification - M45 Package 11 Data Sheet - Rev 2.4 10/2011 AWU6601 PCB AND STENCIL DESIGN GUIDELINE Figure 19: Recommended PCB Layout Information 12 Data Sheet - Rev 2.4 10/2011 AWU6601 COMPONENT PACKAGING Pin 1 Figure 20: Tape & Reel Packaging Table 8: Tape & Reel Dimensions 13 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 3 mm x 3 mm x 1 mm 12 mm 4 mm 2500 7" Data Sheet - Rev 2.4 10/2011 AWU6601 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION AWU6601RM45Q7 -30 oC to +90 oC RoHS Compliant 10 Pin 3 mm x 3 mm x 1 mm Tape and Reel, 2500 pieces per Reel Surface Mount Module AWU6601RM45P9 -30 oC to +90 oC RoHS Compliant 10 Pin 3 mm x 3 mm x 1 mm Partial Tape and Reel Surface Mount Module COMPONENT PACKAGING ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 14 Data Sheet - Rev 2.4 10/2011