Data sheet
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Surface Mount type 4 Direction Detector
RPI-1035
Operating temperat ur e T
opr
25 to 85 °C
Storag e t em perature T
stg
30 to 85 °C
30 mA
Collector dissipation P
C
80 mW
Output
(Phototransistor)
Collector-emitter voltage
Emitter-collector voltage
Collector curr ent I
C
3) 4 Direction Det ector
Forward current
Reverse voltage
I
F
50
5
4.5
V
Absolute maximum rati ngs ( Ta = 25°C)
mW
UnitLimits
V
R
P
D
V
mA
V
30
V
CEO
V
ECO
Input
(LED)
Power dissipation 80
Applications Dimensions (Unit : mm)
Features
SymbolParameter
• DSC(Digit a l st ill camera)
• DVC(Digit al video camer a)
• Smart phone
1) Surface Mount type
2) Optical Sensor
• Fan heater
• Projector
1/4 2016.12 - Rev.C
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Data Sheet
RPI-1035
1) Input characteristics
2) Output characteristics
3) Transfer characteristics
4) Infrared light emitter diode
Cut-off frequency
Peak light emitting wavelength
1Non-coherent Infrared light emitting diode used.
5) Phototransistor
Maximum sensitivity wavelength
2 This product is not designed to be protected against electromagnetic wave.
Parameter Symbol Conditions Values Unit
Min. Typ. Max.
Response time tr·tf VCC=5V, IC=1mA,
RL=100W2-10
PIF =50mA*1-
-
1
950
-
-
P- 800 --
Parameter Symbol Conditions Values Unit
Min. Typ. Max.
fCMHz
Response time Rise time tr -
Fall time tf RL=100-
Peak sensitivity wavelength
Collector-emitter saturation voltage VCE(sat) IF =20mA, IC =0.1mA -
DC leakage current Ileak VCE =5V, IF =5mA -
VCE =5V, IF =5mA
Collector current IC
VCC =5V, IF =20mA
Parameter Symbol Conditions
Electrical and optical characteristics (Ta = 25°C)
V
Max.
1.3
Typ.
- 1.6
IF =50mA
Forward voltage VF
A
-
- 800 -
Parameter Symbol Conditions Values Unit
Min.
Reverse current IR
Parameter Symbol
-
Unit
Dark current ICED
Conditions Values
Min. Typ. Max.
VR =5V --10
A
nm
p
VCE =10V -
-
0.5
nm
nm
s
Unit
100 - -
-15
A
-
0.4 V
10 - ms
-
10
Values
Min. Typ. Max.
2/4 2016.12 - Rev.C
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Data Sheet
RPI-1035
Electrical and opt i cal charact eri st i c curves
FORWARD CURRENT : IF[mA]FORWARD CURRENT : IF[mA]
AMBIENT TEMPERATURE : Ta [°C]
FORWARD CURRENT : IF[mA]
COLLECTOR CURRENT :IC[mA]
POWER DISSIPATION /
COLLECTOR POWER DISSIPT ION : PD/PC (mW)
AMBIENT TEMPERATURE : Ta [°C] AMBIENT TEMPERATURE : Ta [°C]
Fig.3 Power Dissipation / Collector Power
Dissipation vs. Ambient Temperature Fig.4 Relative Output vs. Ambient Temperature
Fig.5 Collector Current vs. Forward Current
DC LEAKAGE CURRENT : Ileak [mA]
Fig.6 DC Leakage Current vs. Fforward Current
RELATIVE CLLECTOR CURRENT : Ic[%]
Fig.1 Forward Current A Falloff
FOWARD VOLTAGE : VF[V]
FORWARD CURRENT : IF[mA]
Fig.2 Forward Current vs. Forward Vol tage
0
20
40
60
80
100
120
25 10 20 3555065
80
I
F
=5mA
V
CE
=5V
3/4 2016.12 - Rev.C
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Data Sheet
RPI-1035
Electrical and opt i cal charact eri st i c curves
LOAD RESISTANCE : RL[k]
RESPONSE TIME: tr [s]
COLLECTOR CURRENT :IC[mA]
COLLECTOR TO EMITTER VOLTAGE : VCE [V]
Fig.9 Output Characteristics Fig.10 Response Time M easurement Circuit
Fig.7 Response Time vs. Collector Current
AMBIENT TEMPERATURE : Ta [°C]
DARK CURRENT : ICED [nA]
Fig.8 Dark Current vs. Ambient Temperature
4/4 2016.12 - Rev.C
R1102
A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
The information contained herein is subject to change without notice.
Before you use our Products, please contact our sales representative
and verify the latest specifica-
tions :
Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
The Products specified in this document are not designed to be radiation tolerant.
For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)