118 AHT www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Axial High Temperature FEATURES * Polarized aluminum non-solid electrolyte high ripple, low impedance 105 C very high ripple 118 AHT 125 C 120 ATC 125 C Fig. 1 DESCRIPTION Rated capacitance range, CR VALUE 6.5 x 18 to 10 x 25 10 x 30 to 21 x 38 4.7 F to 10 000 F Tolerance on CR Rated voltage range, UR 20 % 6.3 V to 200 V -40 C to +125 C -55 C to +125 C Endurance test at 150 C (6.3 V to 100 V) 500 h 500 h Endurance test at 125 C 2000 h 3000 h Useful life at 125 C 4000 h 8000 h Useful life at 40 C, 1.8 x IR applied 500 000 h 1 000 000 h Category temperature range Shelf life at 0 V, 125 C: UR = 6.3 V to 63 V 500 h UR = 100 V and 200 V 100 h Based on sectional specification Climatic category IEC 60068 Revision: 20-Apr-17 * Miniaturized, high CV-product per unit volume * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS QUICK REFERENCE DATA Nominal case sizes (O D x L in mm) capacitors, * Axial leads, cylindrical aluminum case, insulated with a blue sleeve * Mounting ring version not available in insulated form * Taped versions up to case O 15 mm x 30 mm available for automatic insertion * Charge and discharge proof * Extra long useful life: up to 8000 h at 125 C, high reliability * Extended temperature range: 125 C (usable up to 150 C) 119 AHT-DIN 138 AML electrolytic IEC 60 384-4 / EN130 300 40 / 125 / 56 55 / 125 / 56 * Automotive, industrial and telecommunication * Smoothing, filtering, coupling, decoupling, timing * For use after very long storage (10 years) without voltage applied * Portable and mobile equipment (small size, low mass) * Low mounting height boards, vibration and shock resistant * Outdoor applications, e.g. aerial amplifiers MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for 20 %) * Rated voltage (in V) at 125 C and 85 C * Date code, in accordance with IEC 60062 * Code indicating factory of origin * Name of manufacturer * Negative terminal identification * Series number (118) Document Number: 28334 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) CR (F) UR (V) 6.3 10 16 25 40 63 100 200 4.7 - - - - - 6.5 x 18 6.5 x 18 - 10 - - - - - 6.5 x 18 6.5 x 18 - 15 - - - - - - - 10 x 30 22 - - - - - 6.5 x 18 8 x 18 12.5 x 30 33 47 68 100 150 220 330 470 680 1000 - - - - - - 10 x 25 15 x 30 - - - - 6.5 x 18 8 x 18 10 x 25 18 x 30 - - - - - - 10 x 30 - - - - - - - 12.5 x 30 18 x 38 - - - 6.5 x 18 8 x 18 10 x 25 12.5 x 30 21 x 38 - - - - - 10 x 30 - - - - - - 10 x 18 12.5 x 30 15 x 30 - - 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30 18 x 30 - - - - - 10 x 30 - - - - 8 x 18 10 x 18 10 x 25 12.5 x 30 15 x 30 18 x 38 - - 8 x 18 10 x 18 10 x 25 12.5 x 30 18 x 30 21 x 38 - - - - 10 x 30 - - - - - - 10 x 30 12.5 x 30 15 x 30 18 x 38 - - 10 x 18 10 x 25 12.5 x 30 12.5 x 30 18 x 30 21 x 38 - - - 10 x 30 - - - - - 1500 10 x 25 12.5 x 30 12.5 x 30 15 x 30 18 x 38 - - - 2200 - 12.5 x 30 15 x 30 18 x 30 21 x 38 - - - 3300 - 15 x 30 18 x 30 18 x 38 - - - - 4700 - 18 x 30 18 x 38 21 x 38 - - - - 6800 - 18 x 38 21 x 38 - - - - - 10 000 - 21 x 38 - - - - - - DIMENSIONS in millimeters AND AVAILABLE FORMS 73 1.6 OD L I L 33 1 Od Od OD F Form BR: Taped on reel Case O D x L = 6.5 mm x 18 mm to 15 mm x 30 mm F Form AA: Axial in box Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm Form BA: Taped in box (ammopack) Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm Fig. 2 - Forms BA and BR Revision: 20-Apr-17 Fig. 3 - Form AA Document Number: 28334 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents Table 1 AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 21 x 38 AXIAL: FORM AA, BA AND BR CASE CODE Od I O Dmax. Lmax. Fmin. MASS (g) 4 5 6 7 00 01 02 03 04 05 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 55 1 55 1 55 1 55 1 34 1 34 1 6.9 8.5 10.5 10.5 10.5 13.0 15.5 18.5 18.5 21.5 18.5 18.5 18.5 25.5 30.5 30.5 30.5 30.5 39.5 39.5 25 25 25 30 35 35 35 35 44 44 1.3 1.7 2.5 3.3 4.8 7.4 11.7 12.9 19 24 PACKAGING QUANTITIES FORM FORM FORM AA BA BR 1000 1000 500 500 500 500 500 500 340 500 260 400 200 250 120 125 100 - Note * Detailed tape dimensions see section "Packaging". D 120 C (3 x) 3.6 + 0.2 - 0.2 D3 90 2 (3 x) - L 1.05 + 0.03 (3 x) - 0.1 1.3 + 0 (3 x) - 0.05 d2 1.3 + 0.1 (3 x) 0 + 1.0 1 - 0.5 Mounting holes O d1 Case O D x L = 15 mm x 30 mm to 21 mm x 38 mm Especially for applications with severe shocks and vibrations O D2 Fig. 4 - Mounting hole diagram and outline; Form MR: With mounting ring and pins MOUNTING RING; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL 15 x 30 18 x 30 18 x 38 21 x 38 MOUNTING RING: FORM MR CASE CODE O d1 O d2 O Dmax. O D2max. D3 Lmax. MASS (g) PACKAGING QUANTITIES 02 03 04 05 0.8 0.8 0.8 0.8 1.0 + 0.4 1.0 + 0.4 1.0 + 0.4 1.0 + 0.4 15.5 18.5 18.5 21.5 17.5 19.5 19.5 22.5 16.5 0.2 18.5 0.2 18.5 0.2 21.5 0.2 33 33 42 42 8.6 11.5 14.0 19.0 200 240 100 100 ELECTRICAL DATA SYMBOL CR IR IL1 IL5 tan ESR DESCRIPTION Rated capacitance at 100 Hz, tolerance 20 % Rated RMS ripple current at 100 Hz, 125 C Max. leakage current after 1 min at UR Max. leakage current after 5 min at UR Max. dissipation factor at 100 Hz Equivalent series resistance at 100 Hz (calculated from tan max. and CR) Max. impedance at 10 kHz ORDERING EXAMPLE Electrolytic capacitor 118 series 1000 F / 10 V; 20 % Nominal case size: O 10 mm x 30 mm; Form BR Ordering code: MAL211824102E3 Former 12NC: 2222 118 24102 Z Note * Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Revision: 20-Apr-17 Document Number: 28334 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 40 NOMINAL IR IL1 IL5 ESR CR CASE SIZE CASE 100 Hz tan 100 Hz 1 min 5 min 100 Hz ODxL CODE 125 C 100 Hz (F) (A) (A) () (mA) (mm) ORDERING CODE MAL2118....... Z 10 kHz () IN BOX FORM AA TAPED TAPED MOUNTING ON REEL IN BOX RING FORM BR FORM BA FORM MR 1000 10 x 18 6 251 42 17 0.50 0.790 0.80 - 23102E3 33102E3 1500 10 x 25 7 352 61 23 0.50 0.530 0.53 - 90502E3 90503E3 - 220 6.5 x 18 4 109 20 8.4 0.35 2.530 2.10 - 24221E3 34221E3 - 330 8 x 18 5 150 24 11 0.35 1.690 1.40 - 24331E3 34331E3 - 470 8 x 18 5 179 32 13 0.35 1.190 1.00 - 24471E3 34471E3 - 1000 10 x 25 7 343 64 24 0.35 0.560 0.55 - 90504E3 90505E3 - 1000 10 x 30 00 550 64 24 0.32 0.505 0.45 14102E3 24102E3 - - 1500 12.5 x 30 01 740 94 34 0.32 0.340 0.28 14152E3 24152E3 - - 2200 12.5 x 30 01 830 136 48 0.40 0.290 0.27 14222E3 24222E3 - - 3300 15 x 30 02 1070 202 70 0.40 0.190 0.18 14332E3 24332E3 - 44332E3 4700 18 x 30 03 1350 286 98 0.46 0.155 0.15 14472E3 - - 44472E3 6800 18 x 38 04 1730 412 140 0.53 0.100 0.10 14682E3 - - 44682E3 10 000 21 x 38 05 1860 604 200 0.53 0.084 0.10 14103E3 - - 44103E3 220 8 x 18 5 145 25 11 0.25 1.810 1.50 - 25221E3 35221E3 - 330 10 x 18 6 204 36 15 0.25 1.210 1.20 - 25331E3 35331E3 - 470 10 x 18 6 243 49 19 0.25 0.850 0.83 - 25471E3 35471E3 - 680 10 x 30 00 510 69 30 0.22 0.525 0.45 15681E3 25681E3 - - 1000 12.5 x 30 01 720 100 36 0.22 0.345 0.28 15102E3 25102E3 - - 1500 12.5 x 30 01 790 148 52 0.29 0.305 0.27 15152E3 25152E3 - - 2200 15 x 30 02 1010 215 74 0.29 0.205 0.18 15222E3 25222E3 - 45222E3 3300 18 x 30 03 1300 321 110 0.34 0.165 0.15 15332E3 - - 45332E3 4700 18 x 38 04 1670 455 150 0.34 0.105 0.10 15472E3 - - 45472E3 6800 21 x 38 05 1790 657 220 0.38 0.088 0.10 15682E3 - - 45682E3 100 6.5 x 18 4 102 20 9 0.18 2.860 2.30 - 26101E3 36101E3 - 220 10 x 18 6 196 37 15 0.18 1.300 1.25 - 26221E3 36221E3 - 330 10 x 25 7 274 54 21 0.18 0.870 0.82 - 26331E3 36331E3 - 470 10 x 25 7 327 75 28 0.18 0.610 0.57 - 90508E3 90509E3 - 470 10 x 30 00 490 75 28 0.18 0.610 0.50 16471E3 26471E3 - - 680 12.5 x 30 01 680 106 38 0.18 0.420 0.30 16681E3 26681E3 - - 1000 12.5 x 30 01 760 154 54 0.24 0.375 0.28 16102E3 26102E3 - - 1500 15 x 30 02 980 229 79 0.25 0.263 0.22 16152E3 26152E3 - 46152E3 2200 18 x 30 03 1240 334 110 0.26 0.185 0.17 16222E3 - - 46222E3 3300 18 x 38 04 1610 499 170 0.26 0.120 0.11 16332E3 - - 46332E3 4700 21 x 38 05 1710 709 240 0.28 0.095 0.10 16472E3 - - 46472E3 47 6.5 x 18 4 89.8 20 7.8 0.11 3.720 2.80 - 27479E3 37479E3 - 100 8 x 18 5 147 28 12 0.11 1.750 1.30 - 27101E3 37101E3 - 150 10 x 18 6 207 40 16 0.11 1.170 1.00 - 27151E3 37151E3 - 220 10 x 25 7 287 57 22 0.11 0.800 0.68 - 90511E3 90512E3 - 220 10 x 30 00 390 57 22 0.10 0.700 0.55 17221E3 27221E3 - - 330 12.5 x 30 01 570 83 30 0.10 0.430 0.33 17331E3 27331E3 - - 470 12.5 x 30 01 620 117 42 0.11 0.380 0.30 17471E3 27471E3 - - 680 15 x 30 02 810 167 58 0.11 0.255 0.23 17681E3 27681E3 - 47681E3 1000 18 x 30 03 1070 244 84 0.13 0.205 0.18 17102E3 - - 47102E3 1500 18 x 38 04 1390 364 120 0.13 0.130 0.11 17152E3 - - 47152E3 2200 21 x 38 05 1540 532 180 0.15 0.105 0.10 17222E3 - - 47222E3 Revision: 20-Apr-17 Document Number: 28334 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) NOMINAL IR IL1 IL5 ESR CR CASE SIZE CASE 100 Hz tan 100 Hz 1 min 5 min 100 Hz ODxL CODE 125 C 100 Hz (F) (A) (A) () (mA) (mm) ORDERING CODE MAL2118....... Z 10 kHz () IN BOX FORM AA TAPED TAPED MOUNTING ON REEL IN BOX RING FORM BR FORM BA FORM MR 4.7 6.5 x 18 4 35.6 20 4.6 0.07 24.0 8.90 - 28478E3 38478E3 - 10 6.5 x 18 4 51.9 20 5.3 0.07 11.0 5.60 - 28109E3 38109E3 - 22 6.5 x 18 4 77.0 20 6.8 0.07 5.10 3.20 - 28229E3 38229E3 - 47 8 x 18 5 126 22 9.9 0.07 2.40 1.50 - 28479E3 38479E3 - 100 10 x 25 7 243 42 17 0.07 1.10 0.70 - 90513E3 90514E3 - 100 10 x 30 00 340 42 17 0.07 1.91 1.62 18101E3 28101E3 - - 150 12.5 x 30 01 490 61 23 0.07 1.00 0.79 18151E3 28151E3 - - 220 12.5 x 30 01 550 87 32 0.08 0.94 0.82 18221E3 28221E3 - - 330 15 x 30 02 730 129 46 0.09 0.63 0.56 18331E3 28331E3 - 48331E3 470 18 x 30 03 970 182 63 0.09 0.44 0.39 18471E3 - - 48471E3 680 18 x 38 04 1230 261 90 0.09 0.30 0.26 18681E3 - - 48681E3 1000 21 x 38 05 1400 383 130 0.10 0.16 0.20 18102E3 - - 48102E3 4.7 6.5 x 18 4 36 20 4.9 0.07 24.0 19.0 - 29478E3 39478E3 - 10 6.5 x 18 4 52 20 6.0 0.07 11.0 9.00 - 29109E3 39109E3 - 22 8 x 18 5 91 20 8.4 0.07 5.10 4.00 - 29229E3 39229E3 - 33 10 x 25 7 140 24 11 0.07 3.40 2.70 - 29339E3 39339E3 - 47 10 x 25 7 170 33 13 0.07 2.60 2.00 - 90535E3 90536E3 - 47 10 x 30 00 240 33 13 0.08 2.60 2.00 19479E3 29479E3 - - 68 12.5 x 30 01 320 45 18 0.08 1.80 1.20 19689E3 29689E3 - - 100 12.5 x 30 01 380 64 24 0.09 1.40 1.15 19101E3 29101E3 - - 150 15 x 30 02 500 94 34 0.10 0.94 0.78 19151E3 29151E3 - 49151E3 220 18 x 30 03 690 136 48 0.10 0.66 0.55 19221E3 - - 49221E3 330 18 x 38 04 890 202 70 0.10 0.45 0.37 19331E3 - - 49331E3 470 21 x 38 05 1050 286 98 0.10 0.33 0.28 19471E3 - - 49471E3 15 10 x 30 00 150 22 10 0.046 4.76 3.75 92159E3 90012E3 - - 22 12.5 x 30 01 210 31 13 0.046 3.17 2.22 92229E3 90013E3 - - 33 15 x 30 02 290 44 17 0.046 2.11 1.11 92339E3 90014E3 - 90002E3 47 18 x 30 03 390 61 23 0.046 1.48 0.60 92479E3 - - 90003E3 68 18 x 38 04 500 86 31 0.046 1.02 0.42 92689E3 - - 90004E3 100 21 x 38 05 610 124 44 0.046 0.96 0.39 92101E3 - - 90005E3 63 100 200 Revision: 20-Apr-17 Document Number: 28334 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER VALUE CONDITIONS AXIAL MOUNTING RING Voltage Us 1.15 x UR Surge voltage Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 4 A or 20 A (whichever is greater) After 5 min at UR IL5 0.002 CR x UR + 4 A Inductance Case O D x L mm: Equivalent series inductance (ESL) 6.5 x 18 Typ. 15 nH 8 x 18 Typ. 35 nH - 10 x 18 Typ. 69 nH - 10 x 25 Typ. 38 nH - 10 x 30 Typ. 38 nH - 12.5 x 30 Typ. 46 nH - 15 x 30 Typ. 48 nH Typ. 39 nH 18 x 30 Typ. 50 nH Typ. 39 nH 18 x 38 Typ. 54 nH Typ. 39 nH 21 x 38 Typ. 59 nH Typ. 39 nH Table 3 UPRATING VALUES AT REDUCED AMBIENT TEMPERATURE SYMBOL CONDITIONS UR Tamb > 85 C to 125 C 6.3 10 16 25 VALUES 40 63 100 200 UNIT V UR2 Tamb 85 C 10 16 25 40 63 100 125 250 V Note * For applications at ambient temperatures of 85 C, the rated voltage (UR) may be raised to UR2. CAPACITANCE 10 2 ESR ESR0 Curve 1: 63 V Curve 2: 6.3 V 2 1.2 C C0 1.1 4 1 1 10 1.0 0.9 1 2 1 0.8 3 Curve 1: 100 V; 200 V Curve 2: 40 V; 63 V Curve 3: 16 V; 25 V Curve 4: 6.3 V; 10 V 0.7 4 10-1 0.6 -50 0 50 Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm C0 = Capacitance at 20 C, 100 Hz 100 Tamb (C) Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature Revision: 20-Apr-17 -60 -40 -20 0 20 40 60 80 100 120 140 160 Tamb (C) Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm C0 = Capacitance at 20 C, 100 Hz Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature Document Number: 28334 6 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents 1.1 1.2 C C0 1.0 C C0 8 1 1.0 1 0.8 3 0.6 Curve 1: 63 V to 200 V (< 15 F) Curve 2: 63 V; 100 V (< 15 F) Curve 3: 40 V Curve 4: 25 V Curve 5: 16 V Curve 6: 10 V Curve 7: 6.3 V 0.4 0.2 1 2 3 4 0.9 2 0.8 5 0.7 6 7 0.6 0 5 Curve 1: 200 V Curve 2: 100 V Curve 3: 63 V Curve 4: 40 V Curve 5: 25 V Curve 6: 16 V Curve 7: 10 V Curve 8: 6.3 V 4 6 7 8 0.5 102 10 103 104 105 f (Hz) Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm C0 = Capacitance at 20 C, 100 Hz 102 10 103 f (Hz) 104 Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm C0 = Capacitance at 20 C, 100 Hz Fig. 7 - Typical multiplier of capacitance as a function of frequency Fig. 8 - Typical multiplier of capacitance as a function of frequency EQUIVALENT SERIES RESISTANCE (ESR) 102 102 Curve 1: 100 V; 200 V Curve 2: 25 V; 40 V; 63 V Curve 3: 6.3 V; 10 V; 16 V ESR ESR0 ESR ESR0 3 1 2 Curve 1: 6.3 V to 10 V; 16 V Curve 2: 25 V; 40 V; 63 V Curve 3: 100 V; 200 V 10 10 1 1 3 2 1 1 2 3 10-1 -100 -50 0 50 100 150 Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm Tamb (C) ESR0 = Typical at 20 C, 100 Hz 10-1 -100 Fig. 9 - Typical multiplier of ESR as a function of ambient temperature 2.0 ESR ESR0 1.6 1.2 -50 0 50 Case O D x L = 18 mm x 30 mm to 21 mm x 38 mm ESR0 = Typical at 20 C, 100 Hz 100 150 Tamb (C) Fig. 10 - Typical multiplier of ESR as a function of ambient temperature 1.6 1 Curve 1: 63 V to 100 V (< 15 F) Curve 2: 40 V Curve 3: 25 V Curve 4: 6.3 V; 10 V; 16 V 2 3 4 ESR ESR0 1.2 1 2 3 4 5 Curve 1: 200 V Curve 2: 100 V Curve 3: 40 V; 63 V Curve 4: 16 V; 25 V Curve 5: 6.3 V; 10 V 0.8 0.8 4 3 2 1 0.4 5 4 3 2 0.4 1 0 0 10 102 103 104 Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm ESR0 = Typical at 20 C, 100 Hz Fig. 11 - Typical multiplier of ESR as a function of frequency Revision: 20-Apr-17 f (Hz) 105 10 102 103 104 Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm ESR0 = Typical at 20 C, 100 Hz f (Hz) 105 Fig. 12 - Typical multiplier of ESR as a function of frequency Document Number: 28334 7 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents IMPEDANCE (Z) 103 103 Curve 1: 47 V Curve 2: 100 V Curve 3: 220 V Curve 4: 470 V Z () 102 Curve 1: 100 V Curve 2: 220 V Curve 3: 470 V Curve 4: 1000 V Z () 102 1 2 3 4 10 1 10 1 2 3 4 1 10-1 102 10 104 3 105 f (Hz) 106 10-1 102 Tamb (C) Case O D x L = 8 mm x 18 mm 103 102 Curve 1: 22 F, 200 V Curve 2: 68 F, 100 V Curve 3: 150 F, 63 V Curve 4: 220 F, 63 V Curve 5: 330 F, 40 V Curve 6: 470 F, 40 V Curve 7: 680 F, 25 V Curve 8: 1000 F, 25 V and 1000 F, 16 V 2 3 4 5 6 7 8 9 10 11 10 f (Hz) 106 Tamb (C) Fig. 14 - Typical impedance as a function of frequency 103 1 105 Case O D x L = 10 mm x 25 mm Fig. 13 - Typical impedance as a function of frequency Z () 104 103 Z () 1 102 2 3 4 5 6 7 8 9 10 11 10 1 Curve 1: 22 F, 200 V Curve 7: 680 F, 25 V Curve 2: 68 F, 100 V Curve 8: 1000 F, 25 V Curve 3: 150 F, 63 V Curve 9: 1500 F, 16 V Curve 4: 220 F, 63 V Curve 10: 1500 F, 10 V Curve 5: 330 F, 40 V and 2200 F, 6.3 V Curve 6: 470 F, 40 V Curve 11: 3300 F, 6.3 V 1 Curve 9: 1500 F, 16 V and 1500 F, 10 V Curve 10: 1500 F, 10 V and 2200 F, 6.3 V Curve 11: 3300 F, 6.3 V 10-1 2 10 10 3 10 4 10 10 5 f (Hz) 7 10 10 Tamb (40 C) Case O D x L = 18 mm x 30 mm 10-1 6 1 102 2 3 10 102 105 106 f (Hz) 107 Tamb (20 C) Curve 1: 47 F, 200 V Curve 2: 220 F, 100 V Curve 3: 470 F, 63 V Curve 4: 1000 F, 40 V Curve 5: 2200 F, 25 V Curve 6: 3300 F, 18 V Curve 7: 4700 F, 10 V Curve 8: 6800 F, 6.3 V 2 3 10 4 5 6 7 8 1 10-1 10-1 10 1 Z () 4 5 6 7 8 1 104 Fig. 16 - Typical impedance as a function of frequency Curve 1: 47 F, 200 V Curve 2: 220 F, 100 V Curve 3: 470 F, 63 V Curve 4: 1000 F, 40 V Curve 5: 2200 F, 25 V Curve 6: 3300 F, 18 V Curve 7: 4700 F, 10 V Curve 8: 6800 F, 6.3 V Z () 103 Case O D x L = 12.5 mm x 30 mm Fig. 15 - Typical impedance as a function of frequency 103 102 10 2 10 3 10 Case O D x L = 18 mm x 30 mm 4 10 10 5 6 10 f (Hz) 10-2 10 Tamb (40 C) Fig. 17 - Typical impedance as a function of frequency Revision: 20-Apr-17 7 10 102 103 Case O D x L = 18 mm x 30 mm 104 105 106 f (Hz) 107 Tamb (20 C) Fig. 18 - Typical impedance as a function of frequency Document Number: 28334 8 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 4 ENDURANCE TEST DURATION AND USEFUL LIFE NOMINAL CASE SIZE ODxL (mm) ENDURANCE AT 125 C (h) USEFUL LIFE AT 125 C (h) 6.5 x 18 2000 4000 8 x 18 2000 4000 10 x 18 2000 4000 10 x 25 2000 4000 10 x 30 3000 8000 12.5 x 30 3000 8000 15 x 30 3000 8000 18 x 30 3000 8000 18 x 38 3000 8000 21 x 38 3000 8000 Note * Multiplier of useful life code: MBC242 MBC242 IA IR 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 Lifetime multiplier 2.8 0 1. 5 1. 2.6 0 2. 0 3. 0 4. 2.4 0 6. 0 8. 2.2 2.0 12 20 1.8 30 1.6 1.4 1.2 1.0 0.8 0.5 0.0 60 0 10 0 40 40 (1) 0 20 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 125 C (1) Useful life at 125 C and IR applied: Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm: 4000 h Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm: 8000 h 50 60 70 80 90 100 110 120 130 Tamb (C) Fig. 19 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 20-Apr-17 Document Number: 28334 9 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 118 AHT www.vishay.com Vishay BCcomponents Table 5 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) UR (V) 50 100 300 6.3 0.95 1.00 1.07 10 0.95 1.00 16 0.95 1.00 25 0.95 40 63 3000 10 000 1.12 1.15 1.20 1.07 1.12 1.15 1.20 1.07 1.12 1.15 1.20 1.00 1.07 1.12 1.15 1.20 0.90 1.00 1.12 1.20 1.25 1.30 0.90 1.00 1.12 1.20 1.25 1.30 100 0.85 1.00 1.20 1.30 1.35 1.40 200 0.85 1.00 1.20 1.30 1.35 1.40 1000 IR MULTIPLIER Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Tamb = 125 C; UR applied; Case sizes: 6.5 mm x 18 mm to 10 mm x 25 mm: 2000 h; 10 mm x 30 mm to 21 mm x 38 mm: 3000 h UR 6.3 V; C/C: +15 % / -30 % UR > 6.3 V; C/C: 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 125 C; UR and IR applied; Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm: 4000 h Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm: 8000 h UR 6.3 V; C/C: +45 % / -50 % UR > 6.3 V; C/C: 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % (200 V 3 %) Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 125 C; no voltage applied; UR = 6.3 V to 63 V: 500 h; UR = 100 V and 200 V: 100 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C, tan , Z: for requirements see "Endurance test" above IL5 2 x spec. limit Reverse voltage IEC 60384-4 / EN130300 subclause 4.15 Tamb = 125 C: 125 h at U = -1 V followed by 125 h at UR C/C: 20 % tan spec. limit IL5 spec. limit Endurance IEC 60384-4 / EN130300 subclause 4.13 Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 20-Apr-17 Document Number: 28334 10 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000