Type SMP
Surface Mount Power Cross Protection Fuse
RoHS 6 Compliant
SMP May2012D
Pb
Description
SMP Surface mount Power Cross Protection Fuses are
primarily intended for use in telecommunication circuit
applications requiring low current protection with high surge
tolerance.
SMP Series Fuse
tolerance.
These fuses will withstand transient surge currents
generated by lightning in accordance with the attached
table.
SMP fuse guard protected circuitry against sustained
overload or short circuit conditions. Such sustained
overloads may be generated by accidental contact between
utility cables and phone lines (power line cross).
SMP fuse are intended for use in circuits which require
compliance with the test requirements specified in UL/IEC
1950/60950 and Telcordia GR 1089, Issue 3.
Features
1950/60950 and Telcordia GR 1089, Issue 3.
- Surface mount power cross protection fuse.
-
Designed to allow compliance with Telcordia GR
-
SAFETY
AGENCY
E20624
AMPERE RANGE / VOLT
@ I.R.ABILITY
SAFETY AGENCY
CERTIFICATE
500mA - 2A / 125V @100A DC and
600V @60A AC
Safety Agency Approvals
-
Designed to allow compliance with Telcordia GR
-
1089-Core
- Designed to serve the requirements of a wide range
of telecommunication and networking equipment.
- Product is RoHS6 Compliant
500mA - 2A / 125V @100A DC and
600V @60A AC
Specifications Subject to change without notice.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belf.com
Website: www.belfuse.com
Type SMP
Surface Mount Power Cross Protection Fuse
RoHS 6 Compliant
Electrical Specifications
SMP May2012C
Pb
SMP 500 500mA 0.320 0.25 600
SMP 1.25 1.25A 0.079 0.16 600
2A 0.063 0.22 600
Y
Y
600V @ 60A AC and 125V
@100ADC
SMP 2
Y
Y
Y
Ampere
Rating (A)
Catalog
Number
Maximum
Power
Dissipation
(W)
Melting I2T
@ 10 In
(A2 Sec)
Melting I2T
<10 m Sec
(A2 Sec)
Interrupting Rating
Volt-drop
@100% In
(volt) Max.
Max.
Voltage
Rating
(V)
Agency Approvals
Typical Cold
Resistance
(ohm)
2.0
14.0
33.0
0.20
0.40
Y2.3
17.0
37.0 0.52
Electrical Specifications
Temperature Derating Curve Average Time Current Curve
100
110
120
130
140
Percent of Rated Current
50
60
70
80
-75 -65 -55 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 75 85 95 105 115 125 135 145
Percent of Rated Current
Ambient Temperature [oC]
Total Each Polarity SMP 500 SMP 1.25 SMP 2 SMP 500 SMP 1.25 SMP 2
10/1000 50 25 600 25 115 120
1 50 0.33 Will not open Will not open Will not open
10/360 50 25 1000 30 125 150
2 100 0.17 Will not open Will not open Will not open
10/1000 50 25 1000 25 110 120
3 200,400,600 1 Will not open Will not open Will not open
15 minutes
15 minutes
1 Sec
1
1
60
Time For Fuse To Open
GR-1089
1st Level
Test
Voltage
(Vrms)
Short Circuit
Current
(A)
Applications Durations
Repetitions Minimum Withstand Peak Current
(A)
Max. Rise /
Min. Decay
(us) Minimum Peak
Voltage
(V)
Lightning Surge Withstand Capabilities AC Power fault Tests
2/10 20 10 2500 120 500 600
4 1000 1 Will not open Will not open Will not open
10/360 10 5 1000 30 125 150
5 Diagram N/A For Fuses N/A N/A N/A
2/10 2 1 5000 120 500 600
6 600 0.5 Will not open Will not open Will not open
8/20 2 1 5000 75 300 350
7 440 2.2 Will open Will not open Will not open
8 600 3 Will open Will not open Will not open
9 1000 5 Will open Will not open Will not open
CORPORATE OFFICE FAR EAST OFFICE EUROPE OFFICE EUROPE
Bel Fuse Inc. Bel Fuse Ltd. Bel Fuse Europe Ltd. Bel Stewart GmbH
206 Van Vorst Street
8/F Luk Hop Industrial Building
Preston Technology Management Centre
Industriestrasse 20
1.1 Sec
0.4 Sec
5
5
5
1 Sec
5 Sec
30 Sec
2 Sec
60
60
1
Specifications Subject to change without notice.
206 Van Vorst Street
8/F Luk Hop Industrial Building
Preston Technology Management Centre
Industriestrasse 20
Jersey City, NJ 07302 8 Luk Hop Street Marsh Lane, Suite F15 61381 Friedrichsdorf
Tel 201-432-0463 San Po Kong Preston, Lancashire, PR1 8UQ Germany
Fax 201-432-9542 Kowloon, Hong Kong United Kingdom Tel 49-6172-9552-0
E-Mail: belfuse@belf.com Tel 852-2328-5515 Tel 44-1772-556601 Fax 49-6172-9552-40
Website: www. belfuse.com Fax 852-2352-3706 Fax 44-1772-561008
Pb
Type SMP
Surface Mount Power Cross Protection Fuse
RoHS 6 Compliant
SMP 500 SMP 1.25 SMP 2
600V 2.2 1.0 Sec Max. 900 Sec Max. Will not open
600V
2.6
0.8 Sec Max.
50 Sec Max.
2000 Sec Max.
Time For Fuse To Open
Voltage
(Vac)
Current
(A) Duration
Surface Mount Power Cross Protection Fuse
SMP May2012D
AC Current Limiting Protector Tests / Fusing Coordination Tests
600V
2.6
0.8 Sec Max.
50 Sec Max.
2000 Sec Max.
600V 3 0.5 Sec Max. 10 Sec Max. 100 Sec Max.
600V 3.75 0.3 Sec Max. 5 Sec Max. 10 Sec Max.
600V 5 0.2 Sec Max. 2 Sec Max. 3 Sec Max.
600V 7 0.08 Sec Max. 1 Sec Max. 2 Sec Max.
600V 10 0.04 Sec Max. 0.5 Sec Max. 0.7 Sec Max.
600V 12.5 0.01 Sec Max. 0.2 Sec Max. 0.3 Sec Max.
600V 20 0.005 Sec Max. 0.07 Sec Max. 0.1 Sec Max.
600V 25 0.004 Sec Max. 0.04 Sec Max. 0.07 Sec Max.
Up to 15 minutes
600V 30 0.003 Sec Max. 0.02 Sec Max. 0.05 Sec Max.
Specifications Subject to change without notice.
Soldering Parameters
T
smin
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belf.com
Website: www.belfuse.com
Physical Specifications
SSQDNOV2011
Pb
Type SMP
Surface Mount Power Cross Protection Fuse
RoHS 6 Compliant
Pb
SMP May2012D
Environmental Specifications
Mechanical Dimensions Ordering Information
Packaging
CORPORATE OFFICE FAR EAST OFFICE EUROPE OFFICE EUROPE
Bel Fuse Inc. Bel Fuse Ltd. Bel Fuse Europe Ltd. Bel Stewart GmbH
206 Van Vorst Street 8/F Luk Hop Industrial Building Preston Technology Management Centre Industriestrasse 20
Jersey City, NJ 07302
8 Luk Hop Street
Marsh Lane, Suite F15
61381 Friedrichsdorf
Specifications Subject to change without notice.
Jersey City, NJ 07302
8 Luk Hop Street
Marsh Lane, Suite F15
61381 Friedrichsdorf
Tel 201-432-0463 San Po Kong
Preston, Lancashire, PR1 8UQ
Germany
Fax 201-432-9542 Kowloon, Hong Kong United Kingdom Tel 49-6172-9552-0
E-Mail: belfuse@belf.com Tel 852-2328-5515 Tel 44-1772-556601 Fax 49-6172-9552-40
Website: www. belfuse.com Fax 852-2352-3706 Fax 44-1772-561008