SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMAJ5.0A~170CA 400W Surface Mount Transient Voltage Suppressor SMA Features z Stand-off voltage from 5.0 to 170 volts z 400W Peak Pulse Power capability on 10/1000 s waveform repetition rate(duty cycle): 0.01% z Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) z Ideal for EFT protection of data lines in accordance with z z z z z z IEC 1000-4-4 (IEC801-4) Fast response time: typically less than 1.0ps from 0v to VBR Low incremental surge resistance, excellent clamping capability Typical IR less than 1 uA above 10V High temperature soldering guaranteed: 250C/10 seconds at terminals This series is UL recognized under component index. File number E315008 RoHS Compliant Maximum Ratings (T Ambient=25C unless noted otherwise) Symbol Description Value Unit 5.0 to 170 V Minimum 400 W Non-repetitive current pulse See Table A Non-repetitive current pulse Steady State Power Dissipation 1.0 W At TL(Lead Temperature)=75C (Note 1) IFSM Peak Forward Surge Current 40.0 A 8.3ms single half sine-wave superimposed on rated load (uni-direction only), TL=75C VF Maximum Instantaneous Forward Voltage 3.5 V 8.3ms single half sine-wave (uni-direction only), TL=75C -55 to 150 C V WM Stand-Off Voltage PPPM Peak Pulse Power Dissipation on 10/1000 us waveform IPPM Peak Pulse current on 10/1000 us waveform PM(AV) Operating Junction and Storage TJ,TSTG Temperature Range Conditions Note: (1) Mounted on copper pad area of 0.2" x 0.2" (5.0mmx5.0mm). TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-247-2232 Fax: (800)-TAITFAX (800)-TAITRON (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. D/AH 2007-08-01 Page 1 of 6 400W Surface Mount Transient Voltage Suppressor SMAJ5.0A~170CA Mechanical Data Case: JEDEC DO-214AC molded plastic Epoxy: Meets UL 94V-0 flammability rating Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Cathode indicated by color band Mounting position: Any Weight: 0.002 ounces, 0.064 gram Electrical Characteristics (T Ambient=25C unless noted otherwise) P/N (note1) Device Marking Code Stand-Off Voltage Breakdown Voltage @ Test Current V BR IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Max. Clamping Voltage @ IT(mA) Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. VC (V) IPPM (A) ID (A) SMAJ5.0A SMAJ5.0CA AE WE 5.0 6.4 7.08 9.2 43.5 800/1600 SMAJ6.0A SMAJ6.0CA AG WG 6.0 6.67 7.37 10.3 38.8 800/1600 SMAJ6.5A SMAJ6.5CA AK WK 6.5 7.22 7.98 11.2 35.7 500/1000 SMAJ7.0A SMAJ7.0CA AM WM 7.0 7.78 8.6 12.0 33.3 200/400 SMAJ7.5A SMAJ7.5CA AP WP 7.5 8.33 9.21 12.9 31.0 100/200 SMAJ8.0A SMAJ8.0CA AR WR 8.0 8.89 9.83 13.6 29.4 50/100 SMAJ8.5A SMAJ8.5CA AT WT 8.5 9.44 10.4 14.4 27.8 10/20 SMAJ9.0A SMAJ9.0CA AV WV 9.0 10.0 11.1 15.4 26.0 5/10 SMAJ10A SMAJ10CA AX WX 10 11.1 12.3 17.0 23.5 1/2 SMAJ11A SMAJ11CA AZ WZ 11 12.2 13.5 18.2 22.0 SMAJ12A SMAJ12CA BE XE 12 13.3 14.7 19.9 20.1 SMAJ13A SMAJ13CA BG XG 13 14.4 15.9 21.5 18.6 SMAJ14A SMAJ14CA BK XK 14 15.6 17.2 23.2 17.2 SMAJ15A SMAJ15CA BM XM 15 16.7 18.5 24.4 16.4 SMAJ16A SMAJ16CA BP XP 16 17.8 19.7 26.0 15.4 SMAJ17A SMAJ17CA BR XR 17 18.9 20.9 27.6 14.5 10 1.0 1.0 1.0 1.0 (note2) 1.0 1.0 Rev. D/AH 2007-08-01 www.taitroncomponents.com Page 2 of 6 400W Surface Mount Transient Voltage Suppressor SMAJ5.0A~170CA Electrical Characteristics (T Ambient=25C unless noted otherwise) Device Marking Code P/N Stand-Off Voltage Breakdown Voltage @ Test Current V BR IT(mA) IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM ID (A) Max. Clamping Voltage @ Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. VC (V) IPPM (A) SMAJ18A SMAJ18CA BT XT 18 20.0 22.1 29.2 13.7 SMAJ20A SMAJ20CA BV XV 20 22.2 24.5 32.4 12.3 1.0 1.0 SMAJ22A SMAJ22CA BX XX 22 24.4 26.9 35.5 11.3 SMAJ24A SMAJ24CA BZ XZ 24 26.7 29.5 38.9 10.3 SMAJ26A SMAJ26CA CE YE 26 28.9 31.9 42.1 9.5 SMAJ28A SMAJ28CA CG YG 28 31.1 34.4 45.4 8.8 1.0 SMAJ30A SMAJ30CA CK YK 30 33.3 36.8 48.4 8.3 SMAJ33A SMAJ33CA CM YM 33 36.7 40.6 53.3 7.5 SMAJ36A SMAJ36CA CP YP 36 40.0 44.2 58.1 6.9 SMAJ40A SMAJ40CA CR YR 40 44.4 49.1 64.5 6.2 1.0 1.0 SMAJ43A SMAJ43CA CT YT 43 47.8 52.8 69.4 5.8 SMAJ45A SMAJ45CA CV YV 45 50.0 55.3 72.7 5.5 SMAJ48A SMAJ48CA CX YX 48 53.3 58.9 77.4 5.2 SMAJ51A SMAJ51CA CZ YZ 51 56.7 62.7 82.4 4.9 1.0 1.0 SMAJ54A SMAJ54CA RE ZE 54 60.0 66.3 87.1 4.6 SMAJ58A SMAJ58CA RG ZG 58 64.4 71.2 93.6 4.3 SMAJ60A SMAJ60CA RK ZK 60 66.7 73.7 96.8 4.1 SMAJ64A SMAJ64CA RM ZM 64 71.1 78.6 103.0 3.9 1.0 1.0 SMAJ70A SMAJ70CA RP ZP 70 77.8 86.0 113.0 3.5 SMAJ75A SMAJ75CA RR ZR 75 83.3 92.1 121.0 3.3 SMAJ78A SMAJ78CA RT ZT 78 86.7 95.8 126.0 3.2 SMAJ85A SMAJ85CA RV ZV 85 94.4 104 137.0 2.9 SMAJ90A SMAJ90CA RX ZX 90 100 111 146.0 2.7 1.0 1.0 1.0 Rev. D/AH 2007-08-01 www.taitroncomponents.com Page 3 of 6 400W Surface Mount Transient Voltage Suppressor SMAJ5.0A~170CA Electrical Characteristics (T Ambient=25C unless noted otherwise) Device Marking Code P/N Stand-Off Voltage Breakdown Voltage @ Test Curr. Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM VC (V) IPPM (A) ID (A) 162.0 2.5 177.0 2.3 Max. Clamping Vltg. @ IPPM V BR Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. SMAJ100A SMAJ100CA RZ ZZ 100 111 123 SMAJ110A SMAJ110CA SE VE 110 122 135 IT(mA) 1.0 1.0 SMAJ120A SMAJ120CA SG VG 120 133 147 193.0 2.1 SMAJ130A SMAJ130CA SK VK 130 144 159 209.0 1.9 SMAJ150A SMAJ150CA SM VM 150 167 185 243.0 1.6 SMAJ160A SMAJ160CA SP VP 160 178 197 259.0 1.5 SMAJ170A SMAJ170CA SR VR 170 189 209 275.0 1.4 1.0 1.0 Note: 1. For parts with suffix A, the V BR is +/- 5%. 2. For Bi-directional type having VWM of 10V or less, the ID limit is double. Fig.1- Peak Pulse Power Rating Curve PPPM OR IPPM (%) PPPM Peak Pulse Power Dissipation (KW) Typical Characteristics Curves Pulse Width td Ambient Temperature Ta (C) Rev. D/AH 2007-08-01 www.taitroncomponents.com Page 4 of 6 400W Surface Mount Transient Voltage Suppressor SMAJ5.0A~170CA Fig.4- Max. Non-Repetitive Forward Surge Current Uni-directional only IPPM Peak Pulse current (%) IFSM Peak Forward Surge Current (A) Fig.3- Pulse Waveform Time t (ms) Number of Cycles at 60Hz Fig.6- Capacitance CJ Capacitance (pF) (Watts) PM(AV) Steady State Power Dissipation Fig.5- Steady State Power Derating Curve 10 Lead Temperature TL (C) Breakdown Voltage (VBR) Rev. D/AH 2007-08-01 www.taitroncomponents.com Page 5 of 6 400W Surface Mount Transient Voltage Suppressor SMAJ5.0A~170CA Dimensions SMA DO214AC How to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 247-2232 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTACOES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAUDE - SAO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, 200030, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. D/AH 2007-08-01 www.taitroncomponents.com Page 6 of 6