DF005MA thru DF10MA Vishay Semiconductors New Product formerly General Semiconductor Miniature Glass Passivated Single-Phase Bridge Rectifier Case Style DFM Reverse Voltage 50 and 1000V Forward Current 1.0A Features * This series is UL listed under the Recognized Component Index, file number E54214 * Plastic package used has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated chip junction * High surge overload rating of 30 Amperes peak * Ideal for printed circuit boards * High temperature soldering guaranteed: 260C/10 seconds, at 5 lbs. (2.3kg) tension 0.255 (6.5) 0.315 (8.00) 0.245 (6.2) 0.285 (7.24) 0.335 (8.51) 0.320 (8.12) Mechanical Data 0.130 (3.3) 0.120 (3.05) 0.080 (2.03) 0.050 (1.27) 0.045 (1.14) 0.035 (0.89) 0.185 (4.69) 0.150 (3.81) 0.023 (0.58) 0.018 (0.46) 0.205 (5.2) 0.195 (5.0) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols as marked on body Mounting Position: Any Weight: 0.014 oz., 0.4g Packaging codes/options: 45/50 ea.per Bulk Tube 0.013 (3.3) 0.0086 (0.22) 0.350 (8.9) 0.300 (7.6) 0.075 (1.90) 0.055 (1.39) Dimensions in inches and (millimeters) Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. DF DF DF DF DF DF DF Symbol 005MA 01MA 02MA 04MA 06MA 08MA 10MA Parameter Device Marking Code DFA 005 DFA 01 DFA 02 DFA 04 DFA 06 DFA 08 DFA 10 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward output rectified current at TA = 40C IF(AV) 1.0 A Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A I2t 4.5 A2sec RJA RJL 40 15 C/W TJ, TSTG -55 to +150 C Rating for fusing (t < 8.3ms) Typical thermal resistance per leg (Note 1) Operating junction and storage temperature range Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.1 V Maximum reverse current at rated DC blocking voltage per leg IR 5.0 500 A CJ 25 pF TA = 25C TA = 125C Typical junction capacitance per leg at 4.0V, 1MHz Note: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads Document Number 88572 29-Mar-02 www.vishay.com 1 DF005MA thru DF10MA Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Leg 1.0 60 HZ Resistive or Inductive Load 0.5 P.C.B mounted on 0.51 x 0.51" (13 x 13mm) Copper pads with 0.06" (1.5mm) lead length 0 20 60 40 80 100 120 Average Forward Output Current (A) Average Forward Output Current (A) Fig. 1 - Derating Curve Output Rectified Current 30 TJ = 150C Single Sine-Wave (JEDEC Method) 25 20 15 10 1.0 Cycle 5 0 10 1 140 150 Fig. 4 - Typical Reverse Leakage Characteristics Per Leg Fig. 3 - Typical Forward Characteristics Per Leg 100 Instantaneous Reverse Current (A) 1 0.1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.01 0.4 10 TJ = 125C 1 0.1 TJ = 50C 0.01 0.6 0.8 1.0 1.2 40 20 0 1.4 80 60 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Per Leg Fig. 6 - Typical Transient Thermal Impedance Transient Thermal Impedance (C/W) Instantaneous Forward Current (A) 10 100 Junction Capacitance (pF) 100 Number of Cycles at 60 Hz Ambient Temperature (C) TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 10 1 1 10 Reverse Voltage (V) www.vishay.com 2 100 100 10 1 0.1 0.01 0.1 1 10 100 t, Heating Time (sec.) Document Number 88572 29-Mar-02