SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728
Package Dimensions
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
The Blue source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS. It is
recommended to use a wrist band or anti-electrostatic glove
when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
AP1608PBC/A B LUE
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
1.6X0.8mm SMD CHIP LED LAMP
Features
1.6mmX0.8mm SMT LED, 1.1mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE: 2000PCS / REEL .
RoHS COMPLIANT.
SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Part No. Dice Lens Type
Iv (mcd)
@ 20mA
Viewing
Angle
Min. Typ. 2 θ
θ θ
θ 1/2
AP1608PBC/A BLUE (InGaN) WATER CLEAR 18 60 120°
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Blue 463 nm IF=20mA
λDDominant Wavelength Blue 465 nm IF=20mA
∆λ1/2 Spectral Line Half-width Blue 21 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VFForward Voltage Blue 3.3 3.8 V IF=20mA
IRReverse Current Blue 10 uA VR = 5V
Parameter Blue Units
Power dissipation 110 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728
Blue AP1608PBC/A
SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728
AP1608PBC/A
Recommended Soldering Pattern
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specifications
(Units : mm)