1.6X0.8mm SMD CHIP LED LAMP ATTENTION AP1608PBC/A BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The Blue source color devices are made with InGaN LOW POWER CONSUMPTION. on SiC Light Emitting Diode. W IDE VIEW ING ANGLE. Static electricity and surge damage the LEDS. It is IDEAL FOR BACKLIGHT AND INDICATOR. recommended to use a wrist band or anti-electrostatic glove VARIOUS COLORS AND LENS TYPES AVAILABLE. when handling the LEDs. PACKAGE: 2000PCS / REEL . All devices, equipment and machinery must be electrically grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728 Selection Guide Part No. Dice AP1608PBC/A Iv (mcd) @ 20mA Lens Type BLUE (InGaN) WATER CLEAR Viewing Angle Min. Typ. 2 1/2 18 60 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Blue D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 463 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 110 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728 Blue AP1608PBC/A SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728 AP1608PBC/A Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE5151 REV NO: V.5 DATE: MAR/18/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203003728