MULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB G6SG Released Besondere Merkmale Features * Gehausetyp: weies P-LCC-6 Gehause, (RGB-Displays) und diffusem Silikon Verguss * Besonderheit des Bauteils: additive Farbmischung durch unabhangige Ansteuerung aller Chips * Wellenlange: 625 nm (rot), 528 nm (true green), 458 nm (blau) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinFilm (rot), ThinGaN (true green, blau) * optischer Wirkungsgrad: 43 lm/W (rot), 36 lm/W (true green), 11 lm/W (blau) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 12 mm Gurt mit 1000/Rolle, o180 mm oder 4000/Rolle, o330 mm * ESD-Festigkeit: ESD-sensitives Bauteil * package: white P-LCC-6 package, diffused silicone resin * feature of the device: additive mixture of color stimuli by independent driving of each chip * wavelength: 625 nm (red), 528 nm (true green), 458 nm (blue) * viewing angle: Lambertian Emitter (120) * technology: ThinFilm (red), ThinGaN (true green, blue) * optical efficiency: 43 lm/W (red), 36 lm/W (true green), 11 lm/W (blue) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 12 mm tape with 1000/reel, o180 mm or 4000/reel, o330 mm * ESD-withstand voltage: ESD senitive Device Anwendungen * Anzeigen im Innen- und Auenbereich (z.B. im Verkehrsbereich; Laufschriftanzeigen) * Getrennte Anteuerung der Leuchtdiodenchips zur Darstellung verschiedener Farben inclusive wei * Vollfarbdisplays bzw. RGB-Displays * Blitzlicht im Handy * Hinterleuchtung (LCD, Schalter, Tasten, Werbebeleuchtung, Allgemeinbeleuchtung) * Einkopplung in Lichtleiter Applications * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * LED chips can be controlled seperately to display various colors including white * full color displays, RGB-Displays * strobe light for cellular phones * backlighting (LCD, switches, keys, illuminated advertising, general lighting) * coupling into light guides 2014-08-26 1 LRTB G6SG Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 23 Type Color of Emission Luminous Intensity1) page 23 IF = 20 mA IV (mcd) red LRTB G6SG red true green blue true green blue 502 ...1400 900 ...2500 180 ...500 Bestellinformation Ordering Information Typ Type Bestellnummer Ordering Code LRTB G6SG-U4AA-1+V2A6-25+S1T4-35 LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 Q65110A9417 Q65110A9441 Anm: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen U4, U2, U6, V1, V4, V2, V6 oder AA enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, -4, oder -5 enthalten ist (siehe Seite 7 fur nahere Information). Z.B.: LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 means that only one group U4, U2, U6, V1, V4, V2, V6 or AA will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 means that only 1 wavelength group -2, -3, -4, or -5 will be shippable (see page 7 for explanation). E.g. LRTB G6SG-U4AA-1+V2A6-25+S1T6-68 means that the device will be shipped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2014-08-26 2 LRTB G6SG Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values red Einheit Unit true green blue Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 125 C IF 70 Stostrom Surge current tp = 10 s, D = 0.005, TS=25C IFM 100 Sperrspannung2) Seite 23 Reverse voltage2) page 23 (TS=25C) VR 12 Durchlassstrom Forward current (TS=25C) 2014-08-26 (min.) (max.) 3 5 50 300 300 5 mA mA V LRTB G6SG Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Symbol Symbol Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange4) Seite 23 Dominant wavelength4) page 23 IF = 20 mA Werte Values Einheit Unit red true green blue (typ.) peak 632 523 453 nm (min.) (typ.) (max.) dom 620.0 625 629.0 518.5 528 541.5 448.5 458 472.5 nm nm nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 18 33 25 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung5) Seite 23 Forward voltage5) page 23 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.1 2.4 2.9 3.2 3.7 2.9 3.2 3.7 V V V Sperrstrom Reverse current VR = 5 V (blue / true green); 12 V (red) (typ.) (max.) IR IR 0.02 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.04 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.07 0.03 0.02 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 4.7 - 3.6 - 4.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 43 36 11 lm/W 340** 600** 180** 340** 600** 180** 340** 600** 180** K/W K/W K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung3) Seite 23 Junction/ambient3) page 23 Sperrschicht/Lotpad Junction/solder point * ** 1chip on (max.) Rth JA 3 chips on (max.) Rth JA (max.) Rth JS Einzelgruppen siehe Seite 7 Individual groups on page 7 Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2014-08-26 4 LRTB G6SG Farbortgruppen6) 7) Seite 23 6) 7) page 23 Chromaticity Coordinate Groups 7 OHA02842 0.9 520 y 530 0.8 540 510 550 0.7 505 3456 true green 0.6 560 570 500 0.5 580 590 600 610 620 630 red 495 0.4 490 0.3 485 0.2 480 0.1 0 5 4 0 460 0.1 blue 3 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 x Gruppe Group 3 4 5 6 Cx Cy Gruppe Group Cx Cy 0.112 0.741 3 0.158 0.017 0.150 0.672 0.166 0.030 0.182 0.689 0.160 0.043 0.153 0.757 0.150 0.026 0.137 0.756 0.153 0.022 0.169 0.686 0.162 0.038 0.205 0.692 0.155 0.053 0.181 0.757 0.143 0.034 0.164 0.760 0.147 0.028 0.190 0.693 0.158 0.047 0.230 0.686 0.148 0.067 0.212 0.747 0.134 0.046 0.194 0.752 0.692 0.308 0.216 0.687 0.681 0.309 0.257 0.673 0.695 0.295 0.243 0.733 0.707 0.293 4 5 red Anm.: Die Farbkoordinaten des Mischlichtes konnen innerhalb des gekennzeichneten Bereichs des Farbdreiecks erwartet werden. Note: The color coordinates of the mixed light can be expected within the marked area of the color triangle 2014-08-26 5 LRTB G6SG Floating Bins red U4 = 502 ... 631 [mcd] U2 = 560 ... 710 [mcd] U6 = 631... 799 [mcd] V1 = 710 ... 900 [mcd] V4 = 799 ... 1004 [mcd] V2 = 900 ... 1120 [mcd] V6 = 1004... 1252 [mcd] AA = 1120 ... 1400 [mcd] Floating Bins true green V2 = 900 ... 1120 [mcd] V6 = 1004... 1252 [mcd] AA = 1120 ... 1400 [mcd] A4 = 1.250 ...1.590 [mcd] AB = 1.400 ... 1.800 [mcd] A6 = 1.590 ... 2.010 [mcd] Floating Bins blue S1 = 180 ... 224 [mcd] S4 = 201 ... 250 [mcd] S2 = 224 ... 280 [mcd] S6 = 250... 320 [mcd] T1 = 280 ... 355 [mcd] T4 = 315 ... 400 [mcd] T2 = 355 ... 450 [mcd] T6 = 400 ... 500 [mcd] 2014-08-26 6 LRTB G6SG Wellenlangengruppen (Dominantwellenlange)4) Seite 23 Wavelength Groups (Dominant Wavelength)4) page 23 Gruppe Group true green Einheit Unit Gruppe Group min. max. 3 518.5 526.5 nm 4 523.5 531.5 5 528.5 6 533.5 blue Einheit Unit min. max. 3 448.5 456.5 nm nm 4 453.5 461.5 nm 536.5 nm 5 458.5 466.5 nm 541.5 nm 6 463.5 467.5 nm 7 467.5 471.0 nm 8 468.5 472.5 nm Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: U4-1+V2-4+S1-7 Example: U4-1+V2-4+S1-7 Helligkeitsgruppe Helligkeitsgruppe Wellenlange Helligkeitsgruppe Wellenlange Brightness Group Wellenlange (keine Gruppierung) Wavelength (no grouping) Brightness Group Wavelength Brightness Group Wavelength (red) (red) (true green) (true green) (blue) (blue) 1 V2 4 S1 7 U4 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 2014-08-26 7 LRTB G6SG Relative spektrale Emission6) Seite 23 Relative Spectral Emission6) page 23 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 20 mA OHL02523 100 % I rel 80 V 60 red blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik6) Seite 23 Radiation Characteristic6) page 23 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2014-08-26 0.8 0.6 0.4 0 20 8 40 60 80 100 120 LRTB G6SG Durchlassstrom6) Seite 23 Forward Current6) page 23 IF = f (VF); TS = 25 C; red Relative Lichtstarke6) 7) Seite 23 Relative Luminous Intensity6) 7) page 23 IV/IV(20 mA) = f (IF); TS = 25 C OHL00573 102 mA OHL02525 101 IV IF I V (20 mA) 5 100 5 10 1 5 blue true green 10 -1 red 5 100 1.7 1.9 2.1 2.3 10-2 10 0 2.5 V 2.7 5 10 1 mA 10 2 IF VF Durchlassstrom6) Seite 23 Forward Current6) page 23 IF = f (VF); TS = 25 C ; blue, true green Relative Lichtstarke6) Seite 23 Relative Luminous Intensity6) page 23 IV/IV(25 C) = f (TS); IF = 20 mA OHL02359 10 2 IV mA IF OHL02524 1.8 I V (25 C) 1.6 5 red 1.4 1.2 10 1 blue true green 1.0 5 0.8 0.6 10 0 2.5 3 3.5 4 0.4 -40 -20 4.5 V 5 20 40 60 C 100 Tj VF 2014-08-26 0 9 LRTB G6SG Dominante Wellenlange6) Seite 23 Dominant Wavelength6) page 23 blue, dom = f (IF); TS = 25 C Dominante Wellenlange6) Seite 23 Dominant Wavelength6) page 23 true green, dom = f (IF); TS = 25 C OHL02526 466 nm OHL02527 545 nm dom dom 464 535 462 530 460 525 true green 458 520 456 515 454 452 510 0 10 20 30 40 50 60 70 505 mA 100 20 40 60 80 mA 120 IF IF 2014-08-26 0 10 LRTB G6SG Maximal zulassiger Durchlassstrom rot Max. Permissible Forward Current red IF = f (T); 1 chip on IF Maximal zulassiger Durchlassstrom rot Max. Permissible Forward Current red IF = f (T); 3 chips on OHL01656 80 mA TS 70 60 IF OHL01658 80 mA TS 70 60 TA TA 50 50 40 40 30 30 total maximum power dissipation of all 3chips has to be limited to 20 <400 mW 20 TA temp. ambient TS temp. solder point 10 0 0 20 40 60 0 80 C 100 T Maximal zulassiger Durchlassstrom true grun Max. Permissible Forward Current true green IF = f (T); 1 chip on OHL01683 IF TA temp. ambient TS temp. solder point 10 20 40 60 80 C 100 T Maximal zulassiger Durchlassstrom true grun Max. Permissible Forward Current true green IF = f (T); 3 chips on 60 mA IF TS 50 0 OHL01684 60 mA TS 50 TA 40 40 TA 30 30 total maximum power dissipation of all 3chips has to be limited to 20 <400 mW 20 TA temp. ambient TS temp. solder point 10 TA temp. ambient TS temp. solder point 10 Do not use below 5 mA 0 0 20 40 60 Do not use below 5 mA 0 80 C 100 T 2014-08-26 0 20 40 60 80 C 100 T 11 LRTB G6SG Maximal zulassiger Durchlassstrom blau Max. Permissible Forward Current blue IF = f (T); 1 chip on OHL01683 IF Maximal zulassiger Durchlassstrom blau Max. Permissible Forward Current blue IF = f (T); 3 chips on 60 mA IF TS 50 OHL01684 60 mA TS 50 TA 40 40 TA 30 30 20 total maximum power dissipation of all 3chips has to be limited to <400 mW 20 TA temp. ambient TS temp. solder point 10 TA temp. ambient TS temp. solder point 10 Do not use below 5 mA 0 0 20 40 60 Do not use below 5 mA 0 80 C 100 T 2014-08-26 0 20 40 60 80 C 100 T 12 LRTB G6SG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); red (1 Chip on) Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); red (1 Chip on) OHL01709 0.12 IF A OHL01711 0.12 IF A 0.10 0.10 0.2 D= 0.2 0.005 0.01 0.02 0.05 0.1 0.5 0.08 0.08 1 D= 0.06 0.04 0.02 tP 0.02 tP IF D= T T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0.12 IF A D= 0.5 0.2 0.005 0.01 0.02 0.05 0.1 0.10 0.08 0.06 0.04 0.04 0.02 tP D= T tP tP D= T tP IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.02 IF T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2014-08-26 OHL01724 D= 1 0.06 T Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); red (3 Chips on) OHL01723 0.10 IF tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); red (3 Chips on) 0.12 IF A tP 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 0.08 1 0.04 tP D= T 0.5 0.06 0.005 0.01 0.02 0.05 0.1 tp 13 LRTB G6SG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); true green (1 Chip on) 0.35 IF A 0.30 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); true green (1 Chip on) OHL01725 t 0.35 IF A 0.30 tP IF D = TP T 0.25 0.15 0.10 t T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 IF D = TP 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 OHL01726 tP 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); true green (3 Chips on) 0.35 IF A 0.30 0.25 0.20 0.15 0.10 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); true green (3 Chips on) OHL01734 t D = TP T 0.35 IF A 0.30 D= 0.25 tP IF 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 t IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2014-08-26 OHL01735 tP 14 LRTB G6SG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); blue (1 Chip on) 0.35 IF A 0.30 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); blue (1 Chip on) OHL01725 t 0.35 IF A 0.30 tP IF D = TP T 0.25 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.10 t T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 IF D = TP 0.25 D= 0.20 OHL01726 tP 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); blue (3 Chips on) 0.35 IF A 0.30 0.25 0.20 0.15 0.10 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); blue (3 Chips on) OHL01734 t D = TP 0.35 IF A 0.30 tP IF T 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 t IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2014-08-26 OHL01735 tP 15 LRTB G6SG Mazeichnung8) Seite 23 Package Outlines8) page 23 2 (0.079) 3.5 (0.138) 3.1 (0.122) 2.8 (0.110) 1.6 (0.063) 0...0.15 (0.006) 2.6 (0.102) A1 Package marking C2 C1 C3 A3 A1 C2 A2 0.9 (0.035) 0.4 (0.016) 3.6 (0.142) 3.2 (0.126) 3.2 (0.126) 2.8 (0.110) (2.5 (0.098)) C1 C3 A3 A2 0.6 (0.024) 0.4 (0.016) 0.7 (0.028) 0.5 (0.020) 0.5 (0.020) 0.3 (0.012) 0.7 (0.028) 0.5 (0.020) GPLY6118 C1 Cathode Red (R) A1 Anode Red (R) C2 Cathode True Green (T) A2 Anode True Green (T) C3 Cathode Blue (B) A3 Anode Blue (B) Gewicht / Approx. weight: 40 mg Gurtung / Polaritat und Lage8) Seite 23 Verpackungseinheit 1000/Rolle, o180 mm oder 4000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 23 Packing unit 1000/reel, o180 mm or 4000/reel, o330 mm 0.3 (0.012) max. 8 (0.315) 2014-08-26 2...3 3.7 (0.146) 3.5 (0.138) 1.5 (0.059) 2.05 (0.081) 12 (0.472) 2 (0.079) 1.75 (0.069) 4 (0.157) 5.5 (0.217) 1.5 (0.059) 16 A2 C2 A1 A3 C3 C1 OHTY0042 LRTB G6SG Empfohlenes Lotpaddesign8) 9) Seite 23 Recommended Solder Pad8) 9) page 23 Reflow Loten Reflow Soldering 0.8 (0.031) Gehausemarkierung Package marking 0.8 (0.031) Gehausemarkierung Package marking A3 1.4 (0.055) A1 4.7 (0.185) A2 C2 C3 C1 16 mm 2 per anode pad for improved heat dissipation 0.35 (0.014) 0.35 (0.014) 0.6 (0.024) Lotstopplack Solder resist OHPY0031 Empfohlenes Platinendesign fur cluster mit 6-lead TOPLED in Serienschaltung Recommended PCB-Design for cluster with 6-lead TOPLED in Series Connection Anode 1 Anode 2 Cathode 2 Anode 3 Cathode 3 Cathode 1 2014-08-26 17 OHPY2398 LRTB G6SG Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t 2014-08-26 18 s 300 LRTB G6SG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL)Gurtverpackung OSRAM Opto LRTBGFTG BIN1: U5-1-0-20 BIN2: V9-5-0-20 6-LEAD MULTILED BIN3: S7-6-0-20 RoHS Compliant Semiconductors (6P) BATCH NO: 1004109518 ML Temp ST 4 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1016 Pack: R33 DEMY 031 B_R999_1011.1241_R (X) PROD NO: 11055131 (Q)QTY: 4000 (G) GROUP: U5-1-0+V9-5-0+S7-6-0 OHA04614 Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 330 (13) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2014-08-26 19 LRTB G6SG Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE Barcode label el see lab e nk, bla cod ve ati . H) y If bar dit mi hu e ed ag (R . RH % /60 C rar ck rel 30 N s VE RS inf pa % ainITI TO to ak of 90 d ntNSUC < ns (pe or TIO d , cte itio an bje ing U g coSEND C nd 5 C su ss CO Ais baRE co ce y 40 be TU MI CThIS C < ll pro tor SE _ < urs ). Ho urs de Ho urs co 72 Ho urs te 48 e Ho 24 6 da e tim th tim e e or ). 23 tim at t wi nt l wi or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ale op se for > se , Mo istist ure 3 is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi, va p. elf Ye ar ks _ < e icat me , C 1 Ye ee urs Sh terlow tem ted at ed uir > 1 W Ho un Af Indno uir DE 1. d e 4 8 ref dy reqy is 2. JE bo e Mo ore tim 16 req : C/ e es dit2b a) tim St or mi IP ed or g is tim e vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label M Y DE R 18 -1 -1 +Q P OU P: 44 01 C: D/ (9 D) O TC BA P) (6 T LO NO : (1 T) DE 18 R Q + P -1 G RO UP : 01 D/ C: (9 D) 00 0 M RA OS TY :2 )Q (Q A 21 00 21 99 8 5 R ic NO : O S em H 12 BA TC H 3G : 12 (X ) PR O D NO : (1 T) 11 00 LO T 14 2 NO (6 P) S 34 o M n O d u p ct to o rs 44 (G ) u L lt S iT Y O T6 P 76 L M Y (X ) PR OD 5 14 2 110 0 20 00 : 998 -1 E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST 26 0 C R Ad C R0 ditio 0 C R RT PA 77 na l TE CK VA XT R: Muster M 21 2100 34 S S em R ic AM o nd O u p ct to o H rs NO . RH H 12 ty (Q )Q TY : el see . lab e H) nk, cod (R idi m GR L bla r ba 23 G If NO :1 E V LE hu 0% e /6 ive d C re ag lat ra ck re 30 _ < inf pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da 40 be oc ry tim e e C th r pr < ll tim cto ). OI 23 oo r wi nt tim e at l wi fa r M TO Fl oo tim s at at ale C at e. ica Fl th th oo r ur el OP nt Fl oo on es uiv if: read ed l 4 5 Fl , lab m ide eq low oc ve l vic is ingen de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al d Le r en re re e re 10 ois tu tim se fo tu re ale op se fo > , M ois r se 3 is , is ha se M ois tu nk be oo . 03 nk rd g M ois in r-p bla in Fl RH g, DM ba Ca po If blath % kin life is (if . ar ST p. wi 10 baator et Jelf r th va Ye ar ks s m _ < m ed 1 Ye ee ur d, C iredic t Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 re ed 8 is re ty qu JE 2. bo M or tim e e 16 re C/ : es idi 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l Le re Ba te Le ve tu re Le Da ois tu re tu re M ois M ois tu M ois M Nns IVEORS ai IT ntNS CT TIO DU U g EcoSE ON A ba IC UR M CThisSTSE (G ) M u L lt S iT Y O T67 P L 6 E D Muster Bi Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Breite / Width 200 5 (7,874 0,1968) 2014-08-26 Lange / length Hohe / height 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 20 OHA02044 LRTB G6SG Revision History: 2014-08-26 Previous Version: 2013-03-13 Page Subjects (major changes since last revision) Date of change 1 acc. to OS-PCN-2006-006-A 2006-02-01 9 Relative Luminous Intensity 2006-03-31 4 acc. to OS-PCN-2006-006-A1-B 2006-05-04 2, 4, 7,8 new ordering code 2007-08-08 2, 6, 7 new ordering codes 2009-10-14 20 OS-IN-2010-032 2010-10-04 all Final datasheet created 2011-07-14 2 Ordering code corrected 2011-10-14 2 Ordering code corrected (brightness range blue) 2013-03-13 21, all Eye safety advice added; general update 2014-08-26 Augensicherheitsbewertung Wegen der Streichung der LED aus der IEC 60825 erfolgt die Bewertung der Augensicherheit nach dem Standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems") Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LED die "exempt"- Gruppe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von 10000 s bezieht). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, konnen temporar eingeschranktes Sehvermogen und Nachbilder je nach Situation zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Eye safety advice Due to the cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "exempt" group (relating to devices in the visible spectrum with an exposure time of 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. 2014-08-26 21 LRTB G6SG Disclaimer Disclaimer Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb.Falls Sie diese Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Scherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2014-08-26 *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended(a) to be implanted in the human body,or(b) to support and/or maintain and sustain human life.If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 22 LRTB G6SG Remarks: 1) Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur red Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus nach CECC 00802 2) 3) 4) 5) 6) 7) 8) 9) 10) 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2014-08-26 11) 23 Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for red Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.