MCD 40 ITRMS = 2x 60 A ITAVM = 2x 38 A VRRM = 1200-1600 V Thyristor/Diode Module Preliminary data VRSM VDSM VRRM VDRM V V 1300 1700 1200 1600 A Type A/K G K SOT-227 B, miniBLOC MCD 40-12io6 MCD 40-16io6 G K A A/K K = Cathode, A = Anode, G = Gate, A/K = Common output Test Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM; TC = 85C TVJ = TVJM; TC = 85C; 180 sine ITSM, IFSM TVJ = 45C; VR = 0 TVJ = TVJM VR = 0 oi dt 2 Maximum Ratings 60 38 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 440 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 450 490 A A 2 TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1250 1220 As A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1010 1010 A2s A2s TVJ = TVJM repetitive, IT = 45 A f = 50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms 100 A/ms 500 A/ms Features Applications (di/dt)cr (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 V/ms PGAV VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 2500 V~ IISOL 1 mA Mounting torque (M4) Terminal connection torque (M4) Weight Typical including screws W W W Md 10 5 0.5 50/60 Hz, RMS DC motor control Softstart AC motor controller Light, heat and temperature control Half controlled rectifier bridge Advantages tP = 30 ms tP = 300 ms VISOL International standard package miniBLOC, SOT-227 B Planar passivated chips Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits 1.5/13 Nm/lb.in. 1.5/13 Nm/lb.in. 30 Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved g 031 Symbol 1-2 http://store.iiic.cc/ MCD 40 Symbol Test Conditions IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF IT, IF = 80 A; TVJ = 25C 1.68 V VT0 rT For power-loss calculations only (TVJ = 125C) 0.85 9.5 V mW VGT VD = 6 V; IGT VD = 6 V; TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.5 1.6 100 200 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 5 V mA IL TVJ = 25C; tP = 10 ms, VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/ms 450 mA IH TVJ = 25C; VD = 6 V; RGK = 200 mA A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms 2 ms C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 tq Characteristic Values 5 miniBLOC, SOT-227 B mA M4 screws (4x) supplied Dim. TVJ = TVJM; IT = 120 A, tP = 200 ms; -di/dt = 10 A/ms VR = 100 V; dv/dt = 20 V/ms; VD = 2/3 VDRM typ.150 ms RthJC RthCH per thyristor/diode; DC current 0.6 0.1 K/W K/W dS dA a Creepage distance on surface Strike distance through air Maximum allowable acceleration 8 4 50 mm mm m/s2 (c) 2000 IXYS All rights reserved Millimeter Min. Max. Inches Min. Max. 2-2 http://store.iiic.cc/