RSF/RSMF Series Stackpole Electronics, Inc. General Purpose Metal Oxide Resistor * * * * Features: Resistive Product Solutions Lower-cost alternative to carbon comps and wirewounds Coating meets UL 94V-0 Meets solvent test of Mil Standard 202, Method 215 Cut and formed product is available on select sizes; contact factory for details Higher or lower resistance values may be possible; contact factory Flameproof RoHS compliant, lead free and halogen free * * * Electrical Specifications Power Rating (Watts) @ 70C Maximum Working Voltage (1) RSF12 0.5W 250V 400V 350V 200 ppm/C RSF1 1W 350V 600V 600V 200 ppm/C RSF2 2W 350V 600V 600V 200 ppm/C Type / Code Maximum Overload Voltage Dielectric Withstanding Voltage Resistance Temperature Coefficient Ohmic Range () and Tolerance 1% 2% 0.1 - 150K 0.1 - 75K 5% 0.1 - 1M 0.1 - 100K 0.1 - 1M 0.1 - 120K 0.1 - 1M RSF3 3W 800V 1,000V 750V 200 ppm/C 0.1 - 470K RSF5 5W 1,000V 1,000V 750V 200 ppm/C 0.1 - 470K RSMF12 0.5W 250V 400V 350V 200 ppm/C RSMF1 1W 350V 600V 500V 200 ppm/C 0.1 - 75K 0.1 - 470K RSMF2 2W 350V 600V 500V 200 ppm/C 0.1 - 100K 0.1 - 470K RSMF3 3W 500V 800V 600V 200 ppm/C 0.1 - 118K 0.1 - 120K 0.1 - 470K RSMF5 5W 1,000V 1,000V 750V 200 ppm/C 0.1 - 470K 0.1 - 560K 0.1 - 1M 0.1 - 46.4K 0.1 - 560K 0.1 - 1M 0.1 - 560K 0.1 - 1M 0.1 - 47K 0.1 - 470K (1) Lesser of PR or maximum working voltage Power Derating Curve: Percent Rated Power (%) 100 -55C 70C 80 RSF1, RSF2, RSF3, RSF5 RSMF2, RSMF3, RSMF5 60 RSF12 RSMF12, RSMF1 40 20 0 -60 235 0 20 40 60 80 100 120 140 160 180 200 220 240 Ambient Temperature (C) Rev Date: 02/08/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 www.seielect.com marketing@seielect.com RSF/RSMF Series Stackpole Electronics, Inc. General Purpose Metal Oxide Resistor Resistive Product Solutions Performance Characteristics Test Test Method Test Specification Typical Results Insulation Resistance JIS C5201-1, IEC60115-1, 4.6 1G 1G Voltage Proof JIS C5201-1, IEC60115-1, 4.7 Short Time Overload JIS C5201-1, IEC60115-1, 4.13 (0.75% + 0.05) < 0.1% Resistance to Solder Heat JIS C5201-1, IEC60115-1, 4.18 (2.0% + 0.05) < 1.0% (5.0% + 0.05) < 2.0% Endurance at 70C (0.5% + 0.05) JIS C5201-1, IEC60115-1, 4.25.1 No mechanical damage. < 0.25% Robustness of Terminations JIS C5201-1, IEC60115-1, 4.16 (1.0% + 0.05) < 0.10% Damp Heat (Steady state) JIS C5201-1, IEC60115-1, 4.24 (5% + 0.05) < 1.5% Rapid Change of Temperature JIS C5201-1, IEC60115-1, 4.19 (1% + 0.05) < 0.2% Resistance to Solvents JIS C5201-1, IEC60115-1, 4.29 No damage to component or removal of marking. Pass Intermittent Overload JIS C5201-1, IEC60115-1, 4.39 (2% + 0.05) < 0.3% Accidental Overload (Flame resistance) JIS C5201-1, IEC60115-1, 4.26 No flaming of gauze. Pass Operating Temperature Range: -55C to +200C (RSF12, RSMF12, RSMF1) -55C to +235C (All others) Mechanical Specifications Type / Code A Body Length B Body Diameter C Lead Length (Bulk) RSF12 0.35 0.04 9.00 1.00 0.13 0.03 3.20 0.80 1.10 0.12 28.00 3.00 RSF1 0.43 0.06 11.00 1.50 0.18 0.04 4.50 1.00 RSF2 0.59 0.06 15.00 1.50 RSF3 D Lead Diameter Lead-Tape Specification Unit 0.03 0.003 0.70 0.08 0.250 6.35 inches mm 1.10 0.20 28.00 5.00 0.03 0.002 0.80 0.05 0.250 6.35 inches mm 0.22 0.04 5.50 1.00 1.18 0.20 30.00 5.00 0.03 0.004 0.75 0.10 0.250 6.35 inches mm 0.69 0.04 17.50 1.00 0.24 0.02 6.00 0.50 1.38 0.12 35.00 3.00 0.03 0.002 0.80 0.05 0.250 6.35 inches mm RSF5 0.96 0.04 24.50 1.00 0.31 0.02 8.00 0.50 1.38 0.12 35.00 3.00 0.03 0.002 0.80 0.05 0.250 6.35 inches mm RSMF12 0.24 0.03 6.00 0.80 0.09 0.01 2.30 0.30 1.10 0.12 28.00 3.00 0.02 0.003 0.55 0.07 0.250 6.35 inches mm RSMF1 0.35 0.04 9.00 1.00 0.13 0.03 3.20 0.80 1.10 0.12 28.00 3.00 0.03 0.003 0.70 0.08 0.250 6.35 inches mm RSMF2 0.43 0.06 11.00 1.50 0.18 0.04 4.50 1.00 1.18 0.20 30.00 5.00 0.03 0.002 0.80 0.05 0.250 6.35 inches mm RSMF3 0.59 0.06 15.00 1.50 0.22 0.04 5.50 1.00 1.18 0.20 30.00 5.00 0.03 0.004 0.75 0.10 0.250 6.35 inches mm RSMF5 0.69 0.04 17.50 1.00 0.24 0.02 6.00 0.50 1.38 0.08 35.00 2.00 0.03 0.002 0.80 0.05 0.250 6.35 inches mm Rev Date: 02/08/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 www.seielect.com marketing@seielect.com RSF/RSMF Series Stackpole Electronics, Inc. General Purpose Metal Oxide Resistor Resistive Product Solutions Packaging Specifications Reeled in accordance with EIA-296-F Series Code A max.(1) B max C 12 2.736 69.50 13.504 343.00 0.197 0.020 5.00 0.50 1 2.815 71.50 13.504 343.00 2 3.524 89.50 3 (2) Tape Unit 2.063 0.079 52.40 2.00 0.250 6.35 inches mm 0.197 0.020 5.00 0.50 2.063 0.079 52.40 2.00 0.250 6.35 inches mm 13.504 343.00 0.394 0.020 10.00 0.50 2.500 0.079 63.50 2.00 0.250 6.35 inches mm 3.740 95.00 12.008 305.00 0.394 0.020 10.00 0.50 2.874 0.079 73.00 2.00 0.250 6.35 inches mm 5 4.331 110.00 12.008 305.00 0.394 0.020 10.00 0.50 3.465 0.079 88.00 2.00 0.250 6.35 inches mm 12 2.618 66.50 13.504 343.00 0.197 0.020 5.00 0.50 2.063 0.079 52.40 2.00 0.250 6.35 inches mm 1 2.736 69.50 13.504 343.00 0.197 0.020 5.00 0.50 2.063 0.079 52.40 2.00 0.250 6.35 inches mm 2 2.815 71.50 13.504 343.00 0.197 0.020 5.00 0.50 2.063 0.079 52.40 2.00 0.250 6.35 inches mm 3 3.524 89.50 13.504 343.00 0.394 0.020 10.00 0.50 2.500 0.079 63.50 2.00 0.250 6.35 inches mm 3.740 12.008 0.394 0.020 2.874 0.079 0.250 95.00 305.00 10.00 0.50 73.00 2.00 6.35 Dimension "E": This is a non-critical dimension that does not have a tolerance in the standard. Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm). (1) Reference value only. The "A" dimension shall be governed by the overall length of the taped component. The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component. (2) The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code. inches mm RSF RSMF 5 Rev Date: 02/08/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 3 D www.seielect.com marketing@seielect.com RSF/RSMF Series Stackpole Electronics, Inc. General Purpose Metal Oxide Resistor Resistive Product Solutions Pulse Limiting Power (one pulse) / RSMF Series 5 10,000 Pulse Power (Watts) 1,000 1,300 1,300 1,300 560 440 215 560 440 215 560 440 215 560 270 190 100 95 250 135 84 42 110 66 37 48 RSMF3 32 RSMF2 16 RSMF1 18 10 8 RSMF12 1 1 10 100 1m 10m 100m 1 Pulse Width (sec.) Pulse Limiting Power (one pulse) / RSMF Series 5 Pulse Power (Watts) 10,000 1,500 1,000 1,000 700 400 1,500 1,000 700 400 1,500 1,000 700 400 800 420 300 150 100 300 180 115 56 130 76 43 21 48 RSMF3 32 RSMF2 16 RSMF1 10 8 RSMF12 1 1 10 100 1m 10m 100m 1 Pulse Width (sec.) RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union's directive regarding "Restrictions on Hazardous Substances" (RoHS 2). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament. RoHS Compliance Status Standard Product Series Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) RSF General Purpose Metal Oxide Leaded Resistor Axial YES 99.3/0.7 Sn/Cu 100% Matte Sn Apr-05 (Japan) Jan-04 (Taiwan, China) 05/14 04/01 RSMF Mini-Metal Oxide Leaded Resistor Axial YES 99.3/0.7 Sn/Cu 100% Matte Sn Apr-05 (Japan) Jan-04 (Taiwan, China) 05/14 04/01 Rev Date: 02/08/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 4 www.seielect.com marketing@seielect.com RSF/RSMF Series Stackpole Electronics, Inc. General Purpose Metal Oxide Resistor Resistive Product Solutions "Conflict Metals" Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the "conflict region" of the Eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to "REACH" We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, "The Registration, Evaluation, Authorization and Restriction of Chemicals", otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order 1 2 3 4 5 6 7 8 9 10 11 R S F 1 2 J T R 4 7 0 Product Series RSF Metal Oxide RSMF Mini Panasert PRSF(1) PRSM(1) Panasert Mini Size 12 1 2 3 5 Power 0.5W 1W 2W 3W 5W Code F G J Tolerance Tol Value 1% E96 2% E24 5% (1) For packaging information, see Radial Leaded Packaging Spec page Rev Date: 02/08/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Code Description T Tape and Reel T Tape and Reel A Ammo B Bulk 5 Packaging Size RSMF12, PRSM12 RSF12, RSF1 RSMF1, RSMF2 PRSF1, PRSM2 RSF2, RSMF3 RSF3, RSMF5 RSF5 RSMF12 RSF12; RSMF1, PRSM12 Resistance Value Quantity 5,000 2,500 2,000 1,000 1,000 500 5,000 2,000 RSF1, RSF2, RSMF2, PRSF1, PRSM2, RSMF3 1,000 RSF3, RSF5, RSMF5 All Sizes 500 1,000 Four characters with the multiplier used as the decimal holder. 0.22 ohm = R220 33.2 ohm = 33R2 10.2 Kohm = 10K2 1 Mohm = 1M00 www.seielect.com marketing@seielect.com