SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 * * * * * * 3-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout Provide Extra Bus-Driving Latches Necessary for Wider Address/Data Paths or Buses With Parity Buffered Control Inputs to Reduce dc Loading Effects Power-Up High-Impedance State Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (NT) 300-mil DIPs SN74ALS841, SN74AS841A . . . DW OR NT PACKAGE (TOP VIEW) OE 1D 2D 3D 4D 5D 6D 7D 8D 9D 10D GND description These 10-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCC 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q 9Q 10Q LE SN74ALS842 . . . DW OR NT PACKAGE (TOP VIEW) OE 1D 2D 3D 4D 5D 6D 7D 8D 9D 10D GND The ten latches are transparent D-type latches. The SN74ALS841 and SN74AS841A have noninverting data (D) inputs. The SN74ALS842 has inverting D inputs. A buffered output-enable (OE) input places the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCC 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q 9Q 10Q LE OE does not affect the internal operation of the latches. Previously stored data can be retained or new data can be entered while the outputs are off. The SN74ALS841, SN74AS841A, and SN74ALS842 are characterized for operation from 0C to 70C. Copyright 1995, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 Function Tables SN74ALS841, SN74AS841A INPUTS OE LE D OUTPUT Q L H H H L H L L L L X Q0 H X X Z SN74ALS842 INPUTS OE LE D OUTPUT Q L H H L L H L H L L X Q0 H X X Z logic symbols SN74ALS841, SN74AS841A OE LE 1D 2D 3D 4D 5D 6D 7D 8D 9D 10D 1 13 2 SN74ALS842 EN OE C1 1D LE 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 1Q 2Q 3Q 4Q 2 2D 3D 4D 5D 6Q 6D 7D 8Q 8D 9Q 9D 10Q 13 1D 5Q 7Q 1 10D POST OFFICE BOX 655303 C1 1D 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2 EN * DALLAS, TEXAS 75265 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q 9Q 10Q SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 logic diagrams (positive logic) SN74ALS841, SN74AS841A OE LE 1 13 C1 1D 2 23 1D 1Q To Nine Other Channels SN74ALS842 OE LE 1 13 C1 1D 2 1D 23 1Q To Nine Other Channels absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN74ALS841, SN74ALS842 . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 recommended operating conditions SN74ALS841 SN74ALS842 UNIT MIN NOM MAX 4.5 5 5.5 VCC VIH Supply voltage VIL IOH Low-level input voltage High-level output current - 2.6 mA IOL tw Low-level output current 24 mA Pulse duration, LE high 20 ns tsu th Setup time, data before LE 10 ns Hold time, data after LE 5 ns TA Operating free-air temperature 0 High-level input voltage 2 V V 0.8 70 V C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN74ALS841 SN74ALS842 MIN VIK VOH VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = - 18 mA IOH = - 0.4 mA VCC = 4.5 V, IOH = - 2.6 mA IOL = 12 mA VOL 5V VCC = 4 4.5 IOZH IOZL VCC = 5.5 V, VCC = 5.5 V, II IIH VCC = 5.5 V, VCC = 5.5 V, IIL IO VCC = 5.5 V, VCC = 5.5 V, SN74ALS841 VCC = 5.5 V ICC SN74ALS842 VCC = 5.5 V TYP - 1.2 VCC - 2 2.4 IOL = 24 mA VO = 2.7 V 0.25 0.4 0.35 0.5 20 VI = 2.7 V VI = 0.4 V - 30 V V 3.2 VO = 0.4 V VI = 7 V VO = 2.25 V Outputs high UNIT MAX V A - 20 A 0.1 mA 20 A - 0.1 mA - 112 mA 19 30 Outputs low 38 62 Outputs disabled 23 40 Outputs high 20 35 Outputs low 48 74 mA Outputs disabled 27 44 All typical values are at VCC = 5 V, TA = 25C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = MIN to MAX UNIT SN74ALS841 tPLH tPHL D Q tPLH tPHL LE Q tPZH tPZL OE Q tPHZ tPLZ OE Q MIN MAX 2 13 2 13 7 21 8 26 2 12 2 12 2 10 2 12 ns ns ns ns For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL D Q tPLH tPHL LE Q tPZH tPZL OE Q tPHZ tPLZ OE Q VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = MIN to MAX SN74ALS842 MIN MAX 4 18 3 13 8 27 6 20 2 12 2 12 1 10 2 12 UNIT ns ns ns ns For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Voltage applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN74AS841A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 recommended operating conditions SN74AS841A MIN NOM MAX 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.8 V High-level output current - 24 mA IOL tw Low-level output current 48 mA 4 ns tsu th Setup time, data before LE 2.5 ns Hold time, data after LE 2.5 ns TA Operating free-air temperature High-level input voltage 2 Pulse duration, LE high V V 0 70 C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK TEST CONDITIONS SN74AS841A TYP MAX MIN VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = - 18 mA IOH = - 2 mA 5V VCC = 4 4.5 IOH = - 15 mA IOH = - 24 mA VOL IOZH VCC = 4.5 V, VCC = 5.5 V, IOL = 48 mA VO = 2.7 V IOZL II VCC = 5.5 V, VCC = 5.5 V, VO = 0.4 V VI = 7 V IIH IIL IO VCC = 5.5 V, VCC = 5.5 V, VI = 2.7 V VI = 0.4 V VCC = 5.5 V, VO = 2.25 V Outputs high 36 60 ICC VCC = 5.5 V Outputs low 58 94 Outputs disabled 56 93 VOH - 1.2 VCC - 2 2.4 UNIT V V 3.2 2 0.35 - 30 0.5 V 50 A - 50 A 0.1 mA 20 A - 0.5 mA - 112 mA mA All typical values are at VCC = 5 V, TA = 25C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = MIN to MAX UNIT SN74AS841A tPLH tPHL D Q tPLH tPHL LE Q tPZH tPZL OE Q tPHZ tPLZ OE Q MIN MAX 1 6.5 1 10.5 2 12 2 12 2 14 2 16 1 8 1 8 ns ns ns ns For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 SN74ALS841, SN74AS841A, SN74ALS842 10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS059C - DECEMBER 1983 - REVISED JANUARY 1995 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.5 V Timing Input Test Point LOAD CIRCUIT FOR 3-STATE OUTPUTS 3.5 V High-Level Pulse 1.3 V R2 1.3 V 1.3 V 0.3 V 0.3 V Data Input tw th tsu 3.5 V 1.3 V 3.5 V Low-Level Pulse 1.3 V 0.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V Output Control (low-level enabling) 1.3 V 1.3 V 0.3 V tPZL Waveform 1 S1 Closed (see Note B) tPLZ [3.5 V 1.3 V tPHZ tPZH Waveform 2 S1 Open (see Note B) 1.3 V VOL 0.3 V VOH 1.3 V 0.3 V [0 V 3.5 V 1.3 V Input 1.3 V 0.3 V tPHL tPLH VOH In-Phase Output 1.3 V 1.3 V VOL tPLH tPHL VOH Out-of-Phase Output (see Note C) 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) SN74ALS841DW ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74ALS841DWE4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74ALS841DWG4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples Purchase Samples SN74ALS841NT ACTIVE PDIP NT 24 15 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS841NTE4 ACTIVE PDIP NT 24 15 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS842DW OBSOLETE SOIC DW 24 TBD Call TI Call TI Samples Not Available Purchase Samples SN74ALS842NT OBSOLETE PDIP NT 24 TBD Call TI Call TI Samples Not Available SN74AS841ADW OBSOLETE SOIC DW 24 TBD Call TI Call TI Samples Not Available SN74AS841ADWR OBSOLETE SOIC DW 24 TBD Call TI Call TI Samples Not Available SN74AS841ANT OBSOLETE PDIP NT 24 TBD Call TI Call TI Samples Not Available (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated