PICOSCOPE 5442B - PICO TECHNOLOGY

Supplied with SDK including example programs • Free technical support • Free updates

Software compatible with Windows XP, Windows Vista, Windows 7 and Windows 8

FLEXIBLE HIGH-PERFORMANCE PC OSCILLOSCOPES

www.picotech.com

PicoScope® 5000 Series

FLEXIBLE RESOLUTION OSCILLOSCOPES

YE AR

High Speed and High Resolution

Flexible resolution, from 8 to 16 bits

Up to 200 MHz analog bandwidth

Up to 512 MS buffer memory

Up to 1 GS/s real-time sampling

Up to 10 GS/s equivalent-time sampling

Up to 200 MHz spectrum analyzer

Built-in function generator or AWG

USB-connected

Digital triggering also reduces re-arm delay and this, combined with the

segmented memory, allows the triggering and capture of events that

happen in rapid sequence. At the fastest timebase you can use rapid

triggering to collect 10,000 waveforms in under 20 milliseconds. Our

mask limit testing function can then scan through these waveforms to

highlight any failed waveforms for viewing in the waveform buffer.

Huge buffer memory

The PicoScope 5000 Series offers memory depths up to 512 million

samples, more than any other oscilloscope in this price range.

Other oscilloscopes have high maximum sampling rates, but without deep

memory they cannot sustain these rates on long timebases. Using its

512 MS buffer, the PicoScope

5444B can sample at 1 GS/s

all the way down to 50 ms/

div (500 ms total capture

time).

Managing all this data calls

for some powerful tools.

There’s a set of zoom buttons, plus an overview window that lets you

zoom and reposition the display by simply dragging with the mouse. Zoom

factors of several million are possible.

Each captured waveform is stored in a segmented buffer so you can rewind

and review up to 10,000 previous waveforms. No longer will you see a

glitch on the screen only for it to vanish before you stop the scope. A mask

can be applied to hide waveforms that are not of interest.

Advanced triggers

As well as the standard range of triggers

found on all oscilloscopes, the PicoScope

5000 Series offers an industry-leading set

of advanced triggers including pulse width,

windowed and dropout triggers to help

you capture the data you need.

Arbitrary waveform and function generator

All units have a built-in function generator (sine, square, triangle, DC level).

As well as basic controls to set level, offset and frequency, more advanced

controls allow you to sweep over a range of frequencies. Combined with

the spectrum peak hold option this

makes a powerful tool for testing

amplifier and filter responses.

The PicoScope 5000 Series B

models include additional built-in

waveforms as well as an arbitrary waveform generator. Waveforms

can be created or edited using the built-in AWG editor, imported from

oscilloscope traces, or loaded from a spreadsheet.

High signal integrity

Most oscilloscopes are built down to a price; ours are built up to a

specification.

Careful front-end design and

shielding reduces noise, crosstalk

and harmonic distortion. Years of

oscilloscope experience leads to

improved pulse response and

bandwidth flatness.

We are proud of the dynamic performance of our products and publish

these specifications in detail. The result is simple: when you probe a circuit,

you can trust in the waveform you see on the screen.

PicoScope: power, portability and versatility

Pico Technology continues to push the limits of PC oscilloscope design. For

the first time in an oscilloscope, Pico Technology have used reconfigurable

ADCs to offer a choice of 8-bit to 16-bit resolutions in a single product.

Flexible resolution

Most digital oscilloscopes gain their high sampling rates by interleaving

multiple 8-bit ADCs. Despite careful design, the interleaving process

introduces errors that always make the dynamic performance worse than

the performance of the individual ADC cores.

The PicoScope 5000 scopes have a significantly different architecture in

which multiple high-resolution ADCs can be applied to the input channels

in different series and parallel combinations to boost either the sampling

rate or the resolution. In series mode, the ADCs are interleaved to provide

1 GS/s at 8 bits (see diagram).

Interleaving reduces the performance of the ADCs, but the result (60 dB

SFDR) is still much better than oscilloscopes that interleave 8-bit ADCs.

This mode can also provide 500 MS/s at 12 bits resolution.

In parallel mode, multiple ADCs are sampled in phase on each channel

increasing the resolution to 14 bits (see diagram) at 125 MS/s per channel

(70 dB SFDR). If only two channels are required then resolution can be

increased to 15 bits, and in single-channel mode all the ADCs are combined

to give a 16-bit mode at 62.5 MS/s.

Portability

Pico Technology oscilloscopes are small, light and portable. In 2-channel

mode the 5000 Series scopes can be powered from USB only, making

them ideal for the engineer on the move. The external power supply is

only needed when operating more than 2 channels. The 5000 Series

oscilloscopes are suitable for field use in many applications, such as design,

research, test, education, service and repair.

High bandwidth, high sampling rate

Most USB-powered oscilloscopes have real-time sampling rates of only

100 or 200 MS/s, but the PicoScope 5000 Series offers up to 1 GS/s, and

a maximum bandwidth of 200 MHz. Equivalent time sampling (ETS) mode

can be used to further boost the sampling rate to 10 GS/s for a more

detailed view of repetitive signals.

Digital triggering

Most digital oscilloscopes sold today still use an analog trigger architecture

based on comparators. This can cause time and amplitude errors that

cannot always be calibrated out. The use of comparators often limits the

trigger sensitivity at high bandwidths.

In 1991 we pioneered the use of fully digital triggering using the actual

digitized data. This technique reduces trigger errors and allows our

oscilloscopes to trigger on the smallest signals, even at the full bandwidth.

Trigger levels and hysteresis can be set with high precision and resolution.

PicoScope 5000 Series PC Oscilloscopes

x256

x32

x6500

USB port directly to the PC’s RAM or hard disk at a rate of over 10 MS/s

(maximum speed is PC-dependent).

Mask limit testing

This feature is specially designed for production and debugging

environments. Capture a signal from a known working system, and

PicoScope will draw a mask around it with your specified tolerance.

Connect the system under test, and PicoScope will highlight any parts

of the waveform that fall outside the mask area. The highlighted details

persist on the display, allowing the scope to catch intermittent glitches

while you work on something else. The measurements window counts the

number of failures, and can display other measurements and statistics at

the same time. You can import and export masks as files.

Custom probe settings

The custom probes feature allows you to correct for gain, attenuation,

offsets and nonlinearities in special probes, or to convert to different units

of measurement (such as current, power or temperature). You can save

definitions to disk for later use.

Spectrum analyzer

With a click of a button,

you can display a

spectrum plot of the

selected channels with

a maximum frequency

up to 200 MHz. A

full range of settings

gives you control

over the number of spectrum bands, window types and display modes:

instantaneous, average, or peak-hold.

You can display multiple spectrum views with different channel selections

and zoom factors, and see these alongside time-domain waveforms of

the same data. A comprehensive set of automatic frequency-domain

measurements, including THD, THD+N, SNR, SINAD and IMD, can be

added to the display.

Math channels

Create new channels by combining input channels and reference

waveforms. Choose from a wide range of arithmetic, logarithmic,

trigonometric and

other functions.

Define a function

using the push-button

control panel or type

an equation in the text

box.

PicoScope Features

High-end features as standard

Buying a scope from some companies is a bit like buying a car. By the time

you have added all the optional extras you need, the price has gone up

considerably. With the PicoScope 5000 Series, high-end features such as

mask limit testing, serial decoding, advanced triggering, measurements,

math, XY mode, digital filtering and segmented memory are all included

in the price.

To protect your investment, both the PC software and firmware inside

the unit can be updated. We have a long history of providing new features

for free as software downloads. Other companies make vague promises

about future enhancements but we deliver on our promises year after

year. Users of our products reward us by becoming lifelong customers,

frequently recommending us to their colleagues.

The design of the PicoScope software ensures that maximum display

area is available for waveform viewing. Even with a laptop you have a

much bigger viewing area and higher resolution than a typical benchtop

scope.

Persistence display modes

See old and new data superimposed, with new data in a brighter color or

shade. This makes it easy to see glitches and dropouts and to estimate their

relative frequency. Choose between analog persistence and digital color,

or create a custom display mode.

Serial decoding

The PicoScope 5000 Series, with its deep memory, is ideal for serial

decoding as it can capture thousands of frames of uninterrupted data.

Protocols currently included are I²C, SPI, RS232/UART, CAN, LIN and

FlexRay. Expect this list to grow with free software updates.

High-speed data acquisition/digitizer

The drivers and software development kit supplied allow you to write

your own software or interface to popular third-party software packages

such as LabVIEW.

If the scope’s ultra-deep memory isn’t enough, the driver supports data

streaming, a mode that captures gap-free continuous data through the

IN VIEW

IN WINDOW

PicoScope 6 Software

Oscilloscope controls: Controls such as voltage range, scope

resolution, channel enable, timebase and memory depth are

placed on the toolbar for quick access, leaving the main display

area clear for waveforms.

Movable axes: The vertical

axes can be dragged up

and down. This feature is

particularly useful when

one waveform is obscuring

another. There’s also an Auto

Arrange Axes command.

Zoom overview:

Click and drag for

quick navigation in

zoomed views.

Spectrum view:

View FFT data

alongside scope view

or independently.

Maths channels: Combine input channels and reference

waveforms using simple arithmetic, or create custom

equations with trigonometric and other functions.

Views: PicoScope is carefully designed to make the best use of

the display area. You can add new scope and spectrum views with

automatic or custom layouts.

Ruler legend: Absolute and differential

ruler measurements are listed here.

Tools > Serial decoding: Decode multiple serial

data signals and display the data alongside the

physical signal or as a detailed table.

Tools > Reference channels: Store waveforms in

memory or on disk and display them alongside live

inputs. Ideal for diagnostics and production testing.

Tools > Masks: Automatically generate a test mask

from a waveform or draw one by hand. PicoScope

highlights any parts of the waveform that fall

outside the mask and shows error statistics.

Waveform replay tools: PicoScope automatically records

up to 10,000 of the most recent waveforms. You can quickly

scan through to look for intermittent events, or use the Buffer

Navigator to search visually.

Rulers: Each axis has two rulers that can be dragged across the

screen to make quick measurements of amplitude, time

and frequency.

Channel options: Filtering, offset,

resolution enhancement, custom probes

and more.

Automatic measurements:

Display calculated measurements

for troubleshooting and analysis.

You can add as many measurements

as you need on each view. Each

measurement includes statistical

parameters showing its variability.

Trigger toolbar:

Quick access to

main controls,

with advanced

triggers in a

pop-up window.

Trigger marker: Drag

to adjust trigger level

and pre-trigger time.

Auto setup button: Configures

the timebase and voltage ranges

for stable display of signals.

PicoScope: the display can be as simple or as complex as

you need. Begin with a single view of one channel, and then

expand the display to include any number of live channels,

math channels and reference waveforms.

Zoom and pan tools: PicoScope allows a zoom factor of

several million, which is necessary when working with the deep

memory of the 5000 Series scopes. Either use the zoom-in,

zoom-out and pan tools, or click and drag in the zoom overview

window for fast navigation.

Signal generator: Generates standard signals or (on selected

scopes) arbitrary waveforms. Includes frequency sweep mode.

VERTICAL PicoScope

5242A

PicoScope

5442A

PicoScope

5242B

PicoScope

5442B

PicoScope

5243A

PicoScope

5443A

PicoScope

5243B

PicoScope

5443B

PicoScope

5244A

PicoScope

5444A

PicoScope

5244B

PicoScope

5444B

Number of channels 2 4 2 4 2 4 2 4 2 4 2 4

Bandwidth (-3 dB) All modes: 60 MHz 8 to 15-bit modes: 100 MHz •16-bit mode: 60 MHz 8 to 15-bit modes: 200 MHz • 16-bit mode: 60 MHz

Bandwidth limiting (–3 dB) 20 MHz, switchable 20 MHz, switchable 20 MHz, switchable

Rise time (calculated, 10% to 90%) All modes: 5.8 ns 8 to 15-bit modes: 3.5 ns • 16-bit mode: 5.8 ns 8 to 15-bit modes: 1.8 ns • 16-bit mode: 5.8 ns

Input connectors BNCs on front panel BNCs on front panel BNCs on front panel

Resolution*

Enhanced vertical resolution

8 bits, 12 bits, 14 bits, 15 bits, 16 bits

Hardware resolution + 4 bits

8 bits, 12 bits, 14 bits, 15 bits, 16 bits

Hardware resolution + 4 bits

8 bits, 12 bits, 14 bits, 15 bits, 16 bits

Hardware resolution + 4 bits

Input characteristics 1 MΩ ±1% || 13 pF, ±1 pF 1 MΩ ±1% || 13 pF, ±1 pF 1 MΩ ±1% || 13 pF, ±1 pF

Input coupling AC/DC AC/DC AC/DC

Input sensitivity 2 mV/div to 4 V/div 2 mV/div to 4 V/div 2 mV/div to 4 V/div

Input ranges ±10 mV to ±20 V full scale, in 11 ranges ±10 mV to ±20 V full scale, in 11 ranges ±10 mV to ±20 V full scale, in 11 ranges

Analog offset range

±250mV (10, 20, 50, 100, 200 mV ranges),

±2.5 V (500 mV, 1 V, 2 V ranges),

±20 V (5, 10, 20 V ranges)

±250mV (10, 20, 50, 100, 200 mV ranges),

±2.5 V (500 mV, 1 V, 2 V ranges),

±20 V (5, 10, 20 V ranges)

±250mV (10, 20, 50, 100, 200 mV ranges),

±2.5 V (500 mV, 1 V, 2 V ranges),

±20 V (5, 10, 20 V ranges)

DC accuracy

±50 mV to ±20 V

±10 mV and ±20 mV ranges

≥ 12-bit mode: ±0.25% typical @ 25°C (±1% of full scale max @ 20 - 30°C) • 8-bit mode: ±1% typical @ 25°C (±3% of full scale max @ 20 - 30°C)

All modes: ±2% typical @ 25°C (±5% of full scale max @ 20 - 30°C)

Overvoltage protection ± 100 V (DC + AC peak) ± 100 V (DC + AC peak) ± 100 V (DC + AC peak)

* Maximum effective resolution is limited on the lowest voltage ranges: ±10 mV = 8 bits • ±20 mV = 12 bits. All other ranges can use full resolution.

HORIZONTAL PicoScope

5242A

PicoScope

5442A

PicoScope

5242B

PicoScope

5442B

PicoScope

5243A

PicoScope

5443A

PicoScope

5243B

PicoScope

5443B

PicoScope

5244A

PicoScope

5444A

PicoScope

5244B

PicoScope

5444B

Max. sampling rate

Any 1 channel

Any 2 channels

Any 3 channels

Four channels

8-bit mode

1 GS/s

500 MS/s

250 MS/s

12-bit mode

500 MS/s

250 MS/s

125 MS/s

14-bit mode

125 MS/s

15-bit mode

125 MS/s

16-bit mode

62.5 MS/s

Sampling rate (repetitive sampling) 2.5 GS/s 5 GS/s 10 GS/s

Sampling rate (USB streaming) 10 MS/s in PicoScope 6. >10 MS/s using supplied API 10 MS/s in PicoScope 6. >10 MS/s using supplied API 10 MS/s in PicoScope 6. >10 MS/s using supplied API

Timebase ranges 2 ns/div to 1000 s/div 1 ns/div to 1000 s/div 500 ps/div to 1000 s/div

Buffer memory** (8-bit) 16 MS 32 MS 64 MS 128 MS 256 MS 512 MS

Buffer memory** (≥ 12-bit) 8 MS 16 MS 32 MS 64 MS 128 MS 256 MS

Buffer memory** continuous streaming 100 MS in PicoScope software 100 MS in PicoScope software 100 MS in PicoScope software

Waveform buffer (no. of segments) 10,000 in PicoScope software 10,000 in PicoScope software 10,000 in PicoScope software

Timebase accuracy (drift) ±50 ppm (±5 ppm/year) ±2 ppm (±1 ppm/year) ±2 ppm (±1 ppm/year)

Sample jitter 3 ps RMS, typical 3 ps RMS, typical 3 ps RMS, typical

** Shared between active channels

DYNAMIC PERFORMANCE

(typical; analog channels)

Crosstalk Better than 400:1 up to full bandwidth (equal voltage ranges)

Total harmonic distortion (THD) 8-bit mode: > 60 dB at 100 kHz full scale input • ≥ 12-bit mode:> 70 dB at 100 kHz full scale input

SFDR 8 and 12-bit: > 60 dB at 100 kHz full scale input • 14 to 16-bit: > 70 dB at 100 kHz full scale input

Noise (on 50 mV range) 8-bit mode 120 µV RMS • 12-bit mode 110 µV RMS • 14-bit mode 100 µV RMS •15-bit mode 85 µV RMS • 16-bit mode 70 µV RMS

Bandwidth flatness (+0.3 dB, -3 dB) from DC to full bandwidth (+0.3 dB, -3 dB) from DC to full bandwidth (+0.3 dB, -3 dB) from DC to full bandwidth

PicoScope 5000 Series Specifications

TRIGGERING PicoScope 5242A/5442A PicoScope 5242B/5442B PicoScope 5243A/5443A PicoScope 5243B/5443B PicoScope 5244A/5444A PicoScope 5244B/5444B

Source All channels All channels All channels

Trigger modes None, Auto, Repeat, Single, Rapid (segmented memory)

Advanced triggers Edge, Window, Pulse width, Window pulse width, Dropout, Window dropout, Interval, Runt pulse, Logic

Trigger types (ETS mode) Rising, falling

Sensitivity Digital triggering provides 1 LSB accuracy up to full bandwidth of scope. • ETS mode: Typical 10 mV p-p, at full bandwidth

Maximum pre-trigger capture 100% of capture size

Maximum post-trigger capture 4 billion samples

Trigger re-arm time < 2 μs on fastest timebase

Maximum trigger rate Up to 10,000 waveforms in a 20 ms burst

EXTERNAL TRIGGER INPUT

Trigger types Edge, pulse width, dropout, interval, logic Edge, pulse width, dropout, interval, logic Edge, pulse width, dropout, interval, logic

Input characteristics Front panel BNC, 1 MΩ ±1% || 13 pF ±1 pF Front panel BNC, 1 MΩ ±1% || 13 pF ±1 pF Front panel BNC, 1 MΩ ±1% || 13 pF ±1 pF

Bandwidth 60 MHz 100 MHz 200 MHz

Voltage range ±5 V, DC coupled ±5 V, DC coupled ±5 V, DC coupled

Overvoltage protection ±100 V (DC + AC peak) ±100 V (DC + AC peak) ±100 V (DC + AC peak)

FUNCTION GENERATOR

Standard output signals Sine, square, triangle, DC voltage Sine, square, triangle, DC voltage Sine, square, triangle, DC voltage

Standard signal frequency DC to 20 MHz DC to 20 MHz DC to 20 MHz

Output frequency accuracy ±50 ppm (±5 ppm/year) ±2 ppm (±1 ppm/year) ±2 ppm (±1 ppm/year)

Output frequency resolution < 50 mHz < 50 mHz < 50 mHz

Output voltage range ±2 V with ±1% DC accuracy ±2 V with ±1% DC accuracy ±2 V with ±1% DC accuracy

Output voltage adjustment Signal amplitude and offset adjustable in approx. 0.25 mV steps within overall ± 2 V range

Amplitude flatness < 2 dB to 20 MHz, typical @ 50 Ω load < 2 dB to 20 MHz, typical @ 50 Ω load < 2 dB to 20 MHz, typical @ 50 Ω load

SFDR > 70 dB, 10 kHz full scale sine wave > 70 dB, 10 kHz full scale sine wave > 70 dB, 10 kHz full scale sine wave

Connector type BNC, 50 Ω output impedance BNC, 50 Ω output impedance BNC, 50 Ω output impedance

Overvoltage protection ±20 V ±20 V ±20 V

Sweep modes Up, down, or alternating, with selectable start/stop frequencies and increments

AWG (B models only)

Update rate - 200 MS/s - 200 MS/s - 200 MS/s

Buffer size - 16 kS - 32 kS - 48 kS

Resolution - 14 bits (output step size

approx. 0.25 mV) -14 bits (output step size

approx. 0.25 mV)

Bandwidth -- > 20 MHz -- > 20 MHz -- > 20 MHz

Rise time (10% to 90%) < 10 ns < 10 ns < 10 ns

PROBE COMPENSATION OUTPUT

Output characteristics 600 Ω 600 Ω 600 Ω

Output frequency 1 kHz 1 kHz 1 kHz

Output level 3 V pk-pk 3 V pk-pk 3 V pk-pk

Overvoltage protection 10 V 10 V 10 V

PicoScope 5000 Series Specifications

SPECTRUM ANALYZER PicoScope 5242A/5442A PicoScope 5242B/5442B PicoScope 5243A/5443A PicoScope 5243B/5443B PicoScope 5244A/5444A PicoScope 5244B/5444B

Frequency range DC to 60 MHz DC to 100 MHz DC to 200 MHz

Display modes Magnitude, average, peak hold Magnitude, average, peak hold Magnitude, average, peak hold

Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top

Number of FFT points Selectable from 128 to 1 million in powers of 2 Selectable from 128 to 1 million in powers of 2 Selectable from 128 to 1 million in powers of 2

MATH CHANNELS

Functions −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, delay

Operands A, B, C, D (input channels), T (time), reference waveforms, pi

AUTOMATIC MEASUREMENTS

Oscilloscope AC RMS, true RMS, DC average, cycle time, frequency, duty cycle, falling rate, fall time, rising rate, rise time, high pulse width, low pulse width, maximum, minimum, peak to peak

Spectrum Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD

Statistics Minimum, maximum, average and standard deviation Minimum, maximum, average and standard deviation Minimum, maximum, average and standard deviation

SERIAL DECODING

Protocols I²C, I²S, SPI, RS232/UART, CAN, LIN, FlexRay I²C, I²S, SPI, RS232/UART, CAN, LIN, FlexRay I²C, I²S, SPI, RS232/UART, CAN, LIN, FlexRay

MASK LIMIT TESTING

Statistics Pass/fail, failure count, total count Pass/fail, failure count, total count Pass/fail, failure count, total count

DISPLAY

Interpolation Linear or sin(x)/x Linear or sin(x)/x Linear or sin(x)/x

Persistence modes Digital color, analog intensity, custom, or none Digital color, analog intensity, custom, or none Digital color, analog intensity, custom, or none

GENERAL

PC connectivity USB 2.0 hi-speed (USB 1.1 and USB 3.0 compatible)

Power requirements 1 A (2 channels) from 2 USB ports (double-headed cable supplied) or 1.5 A at 5 V (up to 4 channels) from AC adaptor

Dimensions 190 x 170 x 40 mm (including connectors)

Weight < 0.5 kg

Temperature range Operating: 0 °C to 50 °C (20 °C to 30 °C for stated accuracy). Storage: –20 °C to 60 °C.

Humidity range Operating: 5 %RH to 80 %RH non-condensing. Storage: 5 %RH to 95 %RH non-condensing.

Environment Dry locations only; up to 2000 m altitude

Safety approvals Designed to EN 61010-1:2010

EMC approvals Tested to EN61326-1:2006 and FCC Part 15 Subpart B

Environmental approvals RoHS and WEEE compliant

Software/PC requirements PicoScope 6, SDK and example programs. Microsoft Windows XP, Windows Vista, Windows 7 or Windows 8 (Windows RT not supported)

Accessories USB cable(s), 2 or 4 probes in probe case, AC adaptor for 4-channel scope

Languages (full support): English, French, German, Italian and Spanish

Languages (UI only): Chinese (Simplified and Traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian, Japanese,

Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish and Turkish

PicoScope 5000 Series Specifications

Pico Technology

James House

Colmworth Business Park

ST. NEOTS

PE19 8YP

United Kingdom

 +44 (0) 1480 396395

 +44 (0) 1480 396296

 sales@picotech.com

*Prices are correct at the time of publication. Please contact Pico Technology for the latest prices before ordering.

MM040.en-2

www.picotech.com

ORDER

CODE DESCRIPTION NUMBER OF

CHANNELS BANDWIDTH FUNC. GEN/

AWG

BUFFER

SIZE

PROBES

SUPPLIED GBP USD* EUR*

PP863 PicoScope 5242A 260 MHz Function generator 16 MS 2 x 60 MHz 699 1153 846

PP864 PicoScope 5242B 260 MHz AWG 32 MS 2 x 60 MHz 799 1318 967

PP865 PicoScope 5243A 2100 MHz Function generator 64 MS 2 x 150 MHz 899 1483 1088

PP866 PicoScope 5243B 2100 MHz AWG 128 MS 2 x 150 MHz 999 1648 1209

PP867 PicoScope 5244A 2200 MHz Function generator 256 MS 2 x 250 MHz 1099 1813 1330

PP868 PicoScope 5244B 2200 MHz AWG 512 MS 2 x 250 MHz 119 9 1978 1451

PP869 PicoScope 5442A 460 MHz Function generator 16 MS 4 x 60 MHz 949 1566 1148

PP870 PicoScope 5442B 460 MHz AWG 32 MS 4 x 60 MHz 1099 1813 1330

PP871 PicoScope 5443A 4100 MHz Function generator 64 MS 4 x 150 MHz 1249 2061 1511

PP872 PicoScope 5443B 4100 MHz AWG 128 MS 4 x 150 MHz 1399 2308 1693

PP873 PicoScope 5444A 4200 MHz Function generator 256 MS 4 x 250 MHz 1549 2556 1874

PP874 PicoScope 5444B 4200 MHz AWG 512 MS 4 x 250 MHz 1699 2803 2056

PicoScope 5000 Series

Connections

The front panels of the 2-channel PicoScope 5000 Series oscilloscopes

have:

• 2 x BNC analog input channels

• 1 x BNC external trigger input

• 1 x BNC AWG/function generator output

• 1 x probe compensation output

The front panels of the 4-channel PicoScope 5000 Series oscilloscopes

have:

• 4 x BNC analog input channels

• 1 x BNC external trigger input

• 1 x BNC AWG/function generator output

• 1 x probe compensation output

The rear panels of all oscilloscopes in the PicoScope 5000 Series have:

• 1 x DC power socket

• 1 x USB 2.0 port

Ordering information

Kit contents and accessories

Your PicoScope 5000 Series oscilloscope kit contains the following items:

• PicoScope 5000 Series oscilloscope

• 2 x probes (2-channel scopes)

• 4 x probes (4-channel scopes)

• Double-headed USB 2.0 cable

• Standard USB 2.0 cable (4-channel scopes only)

• Mains power adaptor (4-channel scopes only)

• Quick Start Guide

• Software and Reference CD

Probes

Your PicoScope 5000 Series oscilloscope kit comes with probes

specifically trimmed to match the performance of your oscilloscope. The

part numbers for these probes are as follows:

60 MHz 150 MHz 250 MHz

MI007 TA132 TA131