3MTM Pin Strip Header .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series * Stackable * Tin Lead or gold plating available * Solder stand-offs facilitate production wave soldering * Board pin retention feature available * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: March 6, 2007 TS-0769-06 Sheet 1 of 5 Physical Insulation Material: Flammability: Color: Contact Material: Plating Underplating: Wiping Area and Solder Tails: Marking: Glass Filled Polyester (PBT) or High Temperature (PCT) UL 94V-0 Black Copper Alloy 50 " [1.27 m] Nickel See ordering information None Electrical Current Rating: 2.5 A Insulation Resistance: > 5 x 109 at 500 VDC Withstanding Voltage: 1500 VRMS at Sea Level Environmental -40C to +105C Process Rating: 260C (per J-STD-020C) for PCT parts only (PBT insulator version), maximum insulator temperature 191C (Solder Wave Process Only) Moisture Sensitivity Level: 1 (per J-STD-020C) for PCT parts only Temperature Rating: UL File No.: E68080 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Pin Strip Header .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series Table 2 One Row Pin Quantity O.040 + .003 [1.02] After Plating Right Angle Solder/Wrap Tails .100 + .003 [2.54] (see note 1) 0.10 [2.5] 0.20 [ 5.1] 0.30 [ 7.6] 0.40 [10.2] 0.50 [12.7] 0.60 [15.2] 0.70 [17.8] 0.80 [20.3] 0.90 [22.9] 1.00 [25.4] 1.10 [27.9] 1.20 [30.5] 1.30 [33.0] 1.40 [35.6] 1.50 [38.1] 1.60 [40.6] 1.70 [43.2] 1.80 [45.7] 1.90 [48.3] 2.00 [50.8] 2.10 [53.3] 2.20 [55.9] 2.30 [58.4] 2.40 [61.0] 2.50 [63.5] 2.60 [66.0] 2.70 [68.6] 2.80 [71.1] 2.90 [73.7] 3.00 [76.2] 3.10 [78.7] 3.20 [81.3] 3.30 [83.8] 3.40 [86.4] 3.50 [88.9] 3.60 [91.4] 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 .170Ts-0769.tif Min [4.32] .100 + .003 [2.54] Dimension C O.040 + .003 [1.02] After Plating In c h [m m ] Straight Solder/Wrap Tails T o le ra n ce U n le s s N o ted in c h Recommended Hole Pattern Notes: 1.Dimension C is a maximum when the pin strip is cut to length, not when the strip is broken to length. 2.Board pin retention feature available: change from ``926'' to ``9R9'' when ordering. 3 Interconnect Solutions http://www.3M.com/interconnects/ .0 .0 0 .1 .0 1 .00 5 .0 00 [ ] D im e n sio n s fo r R e fe re nce O n ly TS-0769-06 Sheet 2 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Pin Strip Header .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series One Row Table 1 Plating Tail Length Code 01 09 02 03 04 05 07 3M Part Number 929647 Straight Gold 929648 Right Angle 01 01 11 09 06 01 02 03 04 05 07 929705 Straight 929834 Straight Tin Dimensions A 0.235 [5.97] 0.235 [5.97] 0.318 [8.08] 0.235 [5.97] B 0.110 [2.79] 0.145 [3.68] 0.210 [5.33] 0.410 [10.41] 0.510 [12.95] 0.610 [15.49] 0.910 [23.11] 0.110 [2.79] 0.110 [2.79] 0.125 [3.18] 0.145 [3.68] 0.710 [18.03] 0.110 [2.79] 0.210 [5.33] 0.410 [10.41] 0.510 [12.95] 0.610 [15.49] 0.910 [23.11] 929835 Right Angle 01 0.235 [5.97] 0.110 [2.79] 929700 Straight 01 11 06 0.318 [8.08] 0.110 [2.79] 0.125 [3.18] 0.710 [18.03] 929730 Right Angle 01 0.318 [8.08] 0.110 [2.79] Ordering Information Gold 929XXX-XX-XX-XX Mating Length Dim A (see table1) Tail Length Code (see table 1) Pin Quantity (see table 2) Gold Plating Suffix Location & Thickness (see table 1) I = 10 [0.25m] all over, PBT insulator (RIA E1 & C1 apply) EU = 10 [0.25um] all over, PCT insulator (RIA E1 & C1 apply) Tin 929XXX-XX-XX-XX Mating Length Dim B (see table 1) Tail Length Code (see table 1) Plating Suffix: blank = 100" [2.54m] tin-lead, PBT insulator (RIA E3 & C2 apply) RK = 200 " [5 um] matte tin, PCT insulator (RIA E1 & C1 apply) Pin Quantity (see table 2) TS-0769-06 Sheet 3 of 5 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Pin Strip Header .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series Table 1 Two Row Pin Quantity Total Pin Quantity 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 Dimension C (see note 1) 0.10 [ 2.5 ] 0.20 [ 5.1] 0.30 [ 7.6] 0.40 [10.2] 0.50 [12.7] 0.60 [15.2] 0.70 [17.8] 0.80 [20.3] 0.90 [22.9] 1.00 [25.4] 1.10 [27.9] 1.20 [30.5] 1.30 [33.0] 1.40 [35.6] 1.50 [38.1] 1.60 [40.6] 1.70 [43.2] 1.80 [45.7] 1.90 [48.3] 2.00 [50.8] 2.10 [53.3] 2.20 [55.9] 2.30 [58.4] 2.40 [61.0] 2.50 [63.5] 2.60 [66.0] 2.70 [68.6] 2.80 [71.1] 2.90 [73.7] 3.00 [76.2] 3.10 [78.7] 3.20 [81.3] 3.30 [83.8] 3.40 [86.4] 3.50 [88.9] 3.60 [91.4] In c h [m m ] T o le ra n c e U n le s s N o ted in c h Notes: 1.Dimension C is a maximum when the pin strip is cut to length, not when the strip is broken to length. Breaking of dual row parts is not recommended. 2.Board pin retention feature available: change from ``926'' to ``9R9'' when ordering. 3 Interconnect Solutions http://www.3M.com/interconnects/ .0 .0 0 .0 00 .1 .0 1 .0 05 [ ] D im e n sio n s for R e fe re n ce O n ly TS-0769-06 Sheet 4 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Pin Strip Header .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series Two Row Table 2 Plating 3M Part Number 929665 Straight Gold 929715 Straight 929667 Right Angle 929745 Right 929836 Straight Tin 929710 Straight 929838 Right Angle Dimensions Tail Length Code 01 09 02 08 03 04 05 01 11 10 03 06 01 A 0.235 [5.97] 0.318 [8.08] 04 0.235 [5.97] 02 01 02 01 09 02 08 03 04 05 01 11 09 10 03 06 01 04 02 0.318 [8.08] 0.235 [5.97] 0.318 [8.08] 0.235 [5.97] B 0.110 [2.79] 0.145 [3.68] 0.210 [5.33] 0.310 [7.87] 0.410 [10.41] 0.510 [12.95] 0.610 [15.49] 0.110 [2.79] 0.125 [3.18] 0.175 [4.45] 0.410 [10.41] 0.710 [18.03] 0.110 [2.79] 0.145 [3.68] 0.405 [10.29] 0.110 [2.79] 0.405 [10.29] 0.110 [2.79] 0.145 [3.68] 0.210 [5.33] 0.310 [7.87] 0.410 [10.41] 0.510 [12.95] 0.610 [15.49] 0.110 [2.79] 0.125 [3.18] 0.145 [3.68] 0.175 [4.45] 0.410 [10.41] 0.710 [18.03] 0.110 [2.79] 0.145 [3.68] 0.405 [10.29] Gold Ordering Information 929XXX-XX-XX-XX 3M Part Number (see table 2) Tail Length Code (see table 2) Pin Quantity (see table 1) Gold Plating Suffix Location & Thickness (see table 2) I = 10 [0.25m] all over, PBT insulator (RIA E1 & C1 apply) EU = 10 [0.25 m] all over, PCT insulator (RIA E1 & C1 apply) Tin 929XXX-XX-XX-XX Plating Suffix: blank = 100" [2.54 m] tin-lead, PBT insulator (RIA E1 & C1 apply) 3M Part Number (see table 2) Tail Length Code (see table 2) 3 Interconnect Solutions http://www.3M.com/interconnects/ Pin Quantity (see table 1) TS-0769-06 Sheet 5 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-A (c) 3M 2007