MBR1035HE3/45 - Vishay [General Semiconductor]

MBR(F,B)1035 thru MBR(F,B)1060

Vishay General Semiconductor

Document Number: 88669

Revision: 07-May-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

Schottky Barrier Rectifier

FEATURES

• Low power loss, high efficiency

• Low forward voltage drop

• High forward surge capability

• High frequency operation

• Meets MSL level 1, per J-STD-020, LF maximum

peak of 245 °C (for TO-263AB package)

• Solder dip 260 °C, 40 s (for TO-220AC and

ITO-220AC package)

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

TYPICAL APPLICATIONS

For use in low voltage, high frequency rectifier of

switching mode power supplies, freewheeling diodes,

dc-to-dc converters and polarity protection application.

MECHANICAL DATA

Case: TO-220AC, ITO-220AC, TO-263AB

Epoxy meets UL 94V-0 flammability rating

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD22-B102

E3 suffix for consumer grade, meets JESD 201 class

1A whisker test, HE3 suffix for high reliability grade

(AEC Q101 qualified), meets JESD 201 class 2

whisker test

Polarity: As marked

Mounting Torque: 10 in-lbs maximum

PRIMARY CHARACTERISTICS

IF(AV) 10 A

VRRM 35 V to 60 V

IFSM 150 A

VF0.57 V, 0.70 V

TJ max. 150 °C

TO-263AB

CASE

PIN 2

PIN 1

TO-220AC

PIN 1

PIN 2

HEATSINK

MBR10xx MBRF10xx

MBRB10xx

ITO-220AC

PIN 2

PIN 1

MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL MBR1035 MBR1045 MBR1050 MBR1060 UNIT

Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V

Maximum average forward rectified current (Fig. 1) IF(AV) 10 A

Peak forward surge current 8.3 ms single half sine-wave

superimposed on rated load IFSM 150 A

Peak repetitive reverse current at tp = 2.0 µs, 1 kHz IRRM 1.0 0.5 A

Voltage rate of change (rated VR) dV/dt 10 000 V/µs

Operating junction temperature range TJ - 65 to + 150 °C

Storage temperature range TSTG - 65 to + 175 °C

Isolation voltage (ITO-220AC only)

from terminal to heatsink t = 1 min VAC 1500 V

MBR(F,B)1035 thru MBR(F,B)1060

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88669

Revision: 07-May-08

Note:

(1) Pulse test: 300 µs pulse width, 1 % duty cycle

Note:

(1) Automotive grade AEC Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL MBR1035 MBR1045 MBR1050 MBR1060 UNIT

Maximum instantaneous

forward voltage (1)

IF = 10 A

IF = 20 A

TJ = 25 °C

TJ = 125 °C

TJ = 25 °C

TJ = 125 °C

0.57

0.84

0.72

0.80

0.70

0.95

0.85

Maximum instantaneous

reverse current at rated DC

blocking voltage (1)

TJ = 25 °C

TJ = 125 °C IR 0.10

15 mA

THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL MBR MBRF MBRB UNIT

Maximum thermal resistance from junction to case RθJC 2.0 4.0 2.0 °C/W

ORDERING INFORMATION (Example)

PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE

TO-220AC MBR1045-E3/45 1.80 45 50/tube Tube

ITO-220AC MBRF1045-E3/45 1.94 45 50/tube Tube

TO-263AB MBRB1045-E3/45 1.33 45 50/tube Tube

TO-263AB MBRB1045-E3/81 1.33 81 800/reel Tape and reel

TO-220AC MBR1045HE3/45 (1) 1.80 45 50/tube Tube

ITO-220AC MBRF1045HE3/45 (1) 1.94 45 50/tube Tube

TO-263AB MBRB1045HE3/45 (1) 1.33 45 50/tube Tube

TO-263AB MBRB1045HE3/81 (1) 1.33 81 800/reel Tape and reel

Figure 1. Forward Current Derating Curve

MBR1035 - MBR1045

MBR1050 - MBR1060

Average Forward Current (A)

0 50 100 150

Case Temperature (°C)

Resistive or Inductive Load

Figure 2. Maximum Non-Repetitive Peak Forward Surge Current

0.1 110 100

125

150

175

100

= T

Max.

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

MBR(F,B)1035 thru MBR(F,B)1060

Vishay General Semiconductor

Document Number: 88669

Revision: 07-May-08

For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

www.vishay.com

Figure 3. Typical Instantaneous Forward Characteristics

Figure 4. Typical Reverse Characteristics

00.2 0.4 0.6 0.81.0 1.2

0.01

0.1

100

= 150 °C

= 25 °C

Pulse Width = 300 µs

1 % Duty Cycle

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

MBR1035 - MBR1045

MBR1050 - MBR1060

020 40 60 80100

0.001

0.01

0.1

100

= 125 °C

= 75 °C

= 25 °C

Percent of Rated Peak Reverse Voltage (%)

Instantenous Reverse Current (mA)

MBR1035 - MBR1045

MBR1050 - MBR1060

Figure 5. Typical Junction Capacitance

Figure 6. Typical Transient Thermal Impedance

0.1 110 100

100

1000

10 000

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

MBR1035 - MBR1045

MBR1050 - MBR1060

Reverse Voltage (V)

Junction Capacitance (pF)

0.01 0.1 110 100

0.1

100

Transient Thermal Impedance (°C/W)

t - Pulse Duration (s)

MBR(F,B)1035 thru MBR(F,B)1060

Vishay General Semiconductor

www.vishay.com For technical questions within your region, please contact one of the following:

PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com

Document Number: 88669

Revision: 07-May-08

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

TO-220AC

CASE

PIN2

PIN1

0.635 (16.13)

0.625 (15.87)

0.415 (10.54) MAX.

0.154 (3.91) DIA.

0.148 (3.74) DIA.

0.113 (2.87)

0.103 (2.62)

0.370 (9.40)

0.360 (9.14)

0.160 (4.06)

0.140 (3.56)

0.057 (1.45)

0.045 (1.14)

0.105 (2.67)

0.095 (2.41) 0.037 (0.94)

0.027 (0.68)

0.205 (5.20)

0.195 (4.95)

0.022 (0.56)

0.014 (0.36)

1.148 (29.16)

1.118 (28.40)

0.560 (14.22)

0.530 (13.46)

0.110 (2.79)

0.100 (2.54)

0.350 (8.89)

0.330 (8.38)

0.145 (3.68)

0.135 (3.43)

0.603 (15.32)

0.573 (14.55)

0.055 (1.39)

0.045 (1.14)

0.185 (4.70)

0.175 (4.44)

ITO-220AC

0.025 (0.64)

0.015 (0.38)

0.404 (10.26)

0.384 (9.75)

0.076 (1.93) REF.

45° REF.

0.600 (15.24)

0.580 (14.73)

0.560 (14.22)

0.530 (13.46)

0.035 (0.89)

0.025 (0.64)

0.205 (5.21)

0.195 (4.95)

0.191 (4.85)

0.171 (4.35)

0.057 (1.45)

0.045 (1.14)

0.671 (17.04)

0.651 (16.54)

0.028 (0.71)

0.020 (0.51)

0.110 (2.79)

0.100 (2.54)

7° REF.

0.350 (8.89)

0.330 (8.38)

0.140 (3.56) DIA.

0.125 (3.17) DIA.

0.135 (3.43) DIA.

0.122 (3.08) DIA.

0.110 (2.79)

0.100 (2.54)

0.190 (4.83)

0.170 (4.32)

TO-263AB

Mounting Pad Layout

0.670 (17.02)

0.591 (15.00)

0.105 (2.67)

0.095 (2.41)

0.08 (2.032) MIN.

0.15 (3.81) MIN.

0.33 (8.38) MIN.

0.42 (10.66) MIN.

0.140 (3.56)

0.110 (2.79)

0.021 (0.53)

0.014 (0.36)

0.110 (2.79)

0.090 (2.29)

0 to 0.01 (0 to 0.254)

0.055 (1.40)

0.047 (1.19)

0.055 (1.40)

0.045 (1.14)

0.190 (4.83)

0.160 (4.06)

0.205 (5.20)

0.195 (4.95)

0.624 (15.85)

0.591 (15.00)

0.037 (0.940)

0.027 (0.686)

0.105 (2.67)

0.095 (2.41)

0.360 (9.14)

0.320 (8.13)

0.411 (10.45)

0.380 (9.65)

0.245 (6.22)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.