SFH 3310
1Version 1.3 | 2018-06-15
Produktdatenblatt | Version 1.1
www.osram-os.com
SFH 3310
Radial T1 Ambient Light Sensor
Silicon NPN Phototransistor with V
λ
Characteristics
Applications
—Access Control / Biometrics (IRIS, Scan, Vein
scan)
—Remote Control, Proximity, Ambient Light Sens-
ing
—Smartphone, Tablet (Backlighting)
Features:
—Package: clear epoxy
—ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
—Adapted to human eye sensitivity (V
λ
)
—Spectral range of sensitivity: (typ) 350 ... 970 nm
Ordering Information
Type Photocurrent Ordering Code
VCE = 5 V;
λ
= 560 nm; Ee = 0.01 mW/cm²
IPCE
SFH 3310 2.5 ... 8.0 µA Q65110A5343
SFH 3310
2Version 1.3 | 2018-06-15
Maximum Ratings
TA = 25 °C
Parameter Symbol Values
Operating temperature Top min.
max.
-40 °C
100 °C
Storage temperature Tstg min.
max.
-40 °C
100 °C
Collector-emitter voltage VCE max. 5.5 V
Collector current ICmax. 20 mA
Emitter-collector voltage VEC max. 0.5 V
ESD withstand voltage
acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
VESD max. 2 kV
Characteristics
TA = 25 °C
Parameter Symbol Values
Wavelength of max sensitivity
λ
S max typ. 570 nm
Spectral range of sensitivity
λ
10% typ. 350 ... 970 nm
Chip dimensions L x W typ. 0.75 x 0.75
mm x mm
Radiant sensitive area A typ. 0.29 mm²
Half angle
φ
typ. 75 °
Photocurrent
Ev = 1000 lx; Std. Light A ; VCE = 5 V
IPCE typ. 375 µA
Dark current
VCE = 5 V; E = 0
ICE0 typ.
max.
3 nA
50 nA
Collector-emitter saturation voltage 1)
IC = IPCE,min X 0.3; Ee = 0.01 mW/cm²
VCEsat typ. 100 mV
Capacitance
VCE = 0 V; f = 1 MHz; E = 0
CCE typ. 16 pF
SFH 3310
3Version 1.3 | 2018-06-15
Grouping
TA = 25 °C
Group Photocurrent Photocurrent
VCE = 5 V;
λ
= 560 nm; Ee = 0.01 mW/cm² VCE = 5 V;
λ
= 560 nm; Ee = 0.01 mW/cm²
min. max.
IPCE IPCE
2 2.5 µA 5.0 µA
3 4.0 µA 8.0 µA
rel
OHF00851
λ
S
400
0500 600 700 800 900 nm 1100
10
20
30
40
50
60
70
80
%
100
λ
V
Relative Spectral Sensitivity 2), 3)
Srel = f (
λ
)
SFH 3310
4Version 1.3 | 2018-06-15
Directional Characteristics 2), 3)
Srel = f (
φ
)
CE
OHF00854
I
0
0
A
CE
V
V
µ
1 2 3 4 5
10
20
30
40
50
60
70
80
200 lx
100 lx
20 lx
Collector-Emitter Current 2), 3)
ICE = f (VCE); Ee = Parameter
PCE
OHF00852
I
1
1
V
E
Aµ
lx10 100 1000
10
100
1000
Photocurrent 2), 3)
IC = f(VCE), IB = Parameter
SFH 3310
5Version 1.3 | 2018-06-15
0
pF
OHF04052
CE
C
CE
V
10
-3
10
-2
10
-1
10
0
10
1
10
2
V
0.5
1.0
1.5
2.0
2.5
3.0
4.0
Collector-Emitter Capacitance 2), 3)
CCE = f (VCE); f = 1 MHz; E = 0 ;
PCE
OHF01024
I
-50
0
A
T
˚C
I
PCE (25 ˚C)
-30 -10 10 30 50 90
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.8
Photocurrent 2)
IPCE,rel = f (TA); VCE = 5 V
SFH 3310
6Version 1.3 | 2018-06-15
Dimensional Drawing 4)
0.6 (0.024)
0.4 (0.016)
4.0 (0.157)
3.6 (0.142)
ø3.1 (0.122)
ø2.9 (0.114)
2.0 (0.079)
1.7 (0.067)
3.1 (0.122)
2.5 (0.098)
3.5 (0.138)
4.5 (0.177)
4.1 (0.161)
1.8 (0.071)
1.2 (0.047)
29 (1.142)
27 (1.063)
2.54 (0.100)
spacing
0.7 (0.028)
0.4 (0.016)
Chip position
Area not flat
GEOY6446
0.4 (0.016)
0.8 (0.031)
Emitter
Approximate Weight: 156.0 mg
Package marking: Collector
SFH 3310
7Version 1.3 | 2018-06-15
Pad 1: emitter
Recommended Solder Pad 4)
SFH 3310
8Version 1.3 | 2018-06-15
TTW Soldering
IEC-61760-1 TTW
0
0s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚C
First wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T
∆
100 ˚C
120 ˚C
130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical process
Dotted line: process limits
< 150 K
SFH 3310
9Version 1.3 | 2018-06-15
Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED speci󰘰ed in this
data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-
sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the
eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light
sources have a high secondary exposure potential due to their blinding e󰘯ect. When looking at bright light
sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-
tion, annoyance, visual impairment, and even accidents, depending on the situation.
Packing information is available on the internet (online product catalog).
For further application related informations please visit www.osram-os.com/appnotes
SFH 3310
10 Version 1.3 | 2018-06-15
Disclaimer
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language word-
ings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please 󰘰nd the latest version in the OSRAM OS Webside.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales o󰘲ce.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to
invoice you for any costs incurred.
Product safety devices/applications or medical devices/applications
OSRAM OS components are not developed, constructed or tested for the application as safety relevant
component or for the application in medical devices.
In case Buyer – or Customer supplied by Buyer– considers using OSRAM OS components in product safety
devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales
partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordi-
nate the customer-speci󰘰c request between OSRAM OS and Buyer and/or Customer.
SFH 3310
11 Version 1.3 | 2018-06-15
Glossary
1) IPCEmin: IPCEmin is the min. photocurrent of the speci󰘰ed group.
2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data
or calculated correlations of technical parameters can only re󰘱ect statistical 󰘰gures. These do not nec-
essarily correspond to the actual parameters of each single product, which could di󰘯er from the typical
data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical
improvements, these typ. data will be changed without any further notice.
3) Testing temperature: TA = 25°C
4) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are speci󰘰ed with ±0.1 and
dimensions are speci󰘰ed in mm.
SFH 3310
12 Version 1.3 | 2018-06-15
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.