132
PHE820 M PHE820 E
275 VAC 50/60 Hz 300 VAC 50/60 Hz
0.01 – 2.2 µF 0.01 – 2.2 µF
± 20% standard, ± 10% option
–40 to +100°C
40/100/56/C
S, N, D, FI, VDE, SEV, IMQ, UL, CSA
≤ 1.0% at 1 kHz
C ≤ 0.33 µF ≥ 30 000 MΩ
C > 0.33 µF ≥ 10 000 s
Tabulated self-resonance frequencies f0 refer to 5 mm lead length.
The 100% screening factory test is carried out at 2150 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test.
PHE820
• EMI suppressor, class X2, metallized polyester
• 0.01 – 2.2 µF, 275/300 VAC, +100°C
TYPICAL APPLICATIONS CONSTRUCTION
TECHNICAL DATA
The capacitors are intended for use as
Interference suppressor in X2 and across-
the-line applications.
Series winding of metallized polyester ,
encapsulated in self-extinguishing material
meeting the requirements of UL 94V -0.
Rated voltage
Capacitance range
Capacitance tolerance
Temperature range
Climatic category
Approvals
Dissipation factor tanδδ
δδ
δ
Insulation resistance
Resonance frequency
Test voltage between
terminals
ENVIRONMENTAL TEST DATA
Endurance IEC 60384-14 1.25 x UR V AC 50 Hz,
once every hour increased
to 1000 VAC for 0.1 s,
1000 h at upper rated temp.
Vibration IEC 60068–2–6 3 directions at 2 hours No visible damage
Test Fc each, 10 – 55 Hz at No open or short circuit
0.75 mm or 98 m/s2
Bump IEC 60068–2–29 1000 bumps at No visible damage
Test Eb 390 m/s2No open or short circuit
Change of IEC 60068–2–14 Upper and lower rated No visible damage
temperature Test Na temperature 5 cycles
Active EN 132400
flammability
Passive IEC 60384-14 (1993)
flammability EN 132400
Humidity IEC 60068-2-3 +40°C and 56 days
Test Ca 90 – 95% R.H.
+0
–1
+5
–0
p d std l max l b
15.0 ± 0.4 0.8 17 30 ±0.4
22.5 ± 0.4 0.8 6 30 ±0.4
27.5 ± 0.4 0.8 6 30 ±0.4
37.5 ± 0.5 1.0 6 30 ±0.7
Tolerance in lead length
< 30 mm mm
≥ 30 mm m m
133
ARTICLE TABLE
0.010 5.5 10.5 18.0 15.0 800 600 1.5 13 100 √√√√√ √√√√ PHE820MB5100M
0.015 5.5 10.5 18.0 15.0 800 600 1.5 11 100 √√√√√ √√√√ PHE820MB5150M
0.022 5.5 10.5 18.0 15.0 800 600 1.5 9.0 100 √√√√√ √√√√ PHE820MB5220M
0.033 5.5 12.5 18.0 15.0 800 600 2.0 7.5 100 √√√√√ √√√√ PHE820MB5330M
0.047 6.5 12.5 18.0 15.0 600 500 2.5 6.5 100 √√√√√ √√√√ PHE820MB5470M
0.068 7.5 14.5 18.0 15.0 400 400 3.0 5.5 100 √√√√√ √√√√ PHE820MB5680M
0.10 8.5 16.0 18.0 15.0 400 400 3.5 4.5 100 √√√√√ √√√√ PHE820MB6100M
0.10 6.5 14.5 26.0 22.5 234 3.5 4.5 100 √√√√√ √√√√ PHE820MD6100M
0.15 8.0 16.0 26.0 22.5 186 4.5 3.9 100 √√√√√ √√√√ PHE820MD6150M
0.22 9.0 18.5 26.0 22.5 168 6.0 2.7 100 √√√√√ √√√√ PHE820MD6220M
0.33 11.0 21.5 26.0 22.5 253 8.0 2.5 100 √√√√√ √√√√ PHE820MD6330M
0.47 11.5 22.5 31.5 27.5 198 10.5 1.9 100 √√√√√ √√√√ PHE820MF6470M
0.68 14.5 24.5 31.5 27.5 153 15.0 1.6 100 √√√√√ √√√√ PHE820MF6680M
1.0 17.5 28.0 31.5 27.5 126 20.0 1.3 100 √√√√√ √√√√ PHE820MF7100M
1.5 16.5 32.0 41.0 37.5 105 27.0 0.75 100 √√√√√ √√√√ PHE820MR7150M
2.2 19.0 36.0 41.0 37.5 91 37.0 0.65 100 √√√√√ √√√√ PHE820MR7220M
300 VAC, PHE820E
0.010 5.5 10.5 18.0 15.0 800 600 1.5 13 100 √√√ PHE820EB5100M
0.015 5.5 10.5 18.0 15.0 800 600 1.5 11 100 √√√ PHE820EB5150M
0.022 5.5 10.5 18.0 15.0 800 600 1.5 9.0 100 √√√ PHE820EB5220M
0.033 5.5 12.5 18.0 15.0 800 600 2.0 7.5 100 √√√ PHE820EB5330M
0.047 6.5 12.5 18.0 15.0 600 500 2.5 6.5 100 √√√ PHE820EB5470M
0.068 7.5 14.5 18.0 15.0 400 400 3.0 5.5 100 √√√ PHE820EB5680M
0.10 8.5 16.0 18.0 15.0 400 400 3.5 4.5 100 √√√ PHE820EB6100M
0.10 6.5 14.5 26.0 22.5 234 3.5 4.5 100 √√√ PHE820ED6100M
0.15 8.0 16.0 26.0 22.5 186 4.5 3.9 100 √√√ PHE820ED6150M
0.22 9.0 18.5 26.0 22.5 168 6.0 2.7 100 √√√ PHE820ED6220M
0.33 11.0 21.5 26.0 22.5 253 8.0 2.5 100 √√√ PHE820ED6330M
0.33 10.5 20.5 31.5 27.5 216 9.0 2.4 100 √√√ PHE820EF6330M
0.47 11.5 22.5 31.5 27.5 198 10.5 1.9 100 √√√ PHE820EF6470M
0.68 14.5 24.5 31.5 27.5 153 15.0 1.6 100 √√√ PHE820EF6680M
1.0 17.5 28.0 31.5 27.5 126 20.0 1.3 100 √√√ PHE820EF7100M
1.5 16.5 32.0 41.0 37.5 105 27.0 0.75 100 √√√ PHE820ER7150M
2.2 19.0 36.0 41.0 37.5 91 37.0 0.65 100 √√√ PHE820ER7220M
*The complete serie includes C values according to the E12 series. Details on request.
Quantity per package
Capaci- Max dimensions reel Max Approvals
tance* in mm Bulk Tray taped Weight fOdU/dt Article code
µF B H L p pcs pcs p cs g MHz V/µs 1 st block
S
N
D
FI
VDE
SEV
IMQ
UL
CSA
PHE820
275 VAC, PHE820M
134
PHE820
APPROVALS/REFERENCE DOCUMENTS
Country Specification Approval reference
PHE820M PHE820E
S = Sweden EN 132400 9510033, 9510034
9719009-01
N = Norway EN 132400 P97101751
D = Denmark EN 132400 306839
Fl = Finland EN 132400 196591-01
VDE = Germany EN 132400 89758, 101314
SEV = Switzerland EN 132400 95.7 70721.01
IMQ = Italy EN 132400 V 2884
U L = USA UL 1283 (UR = 250 V AC) E 100117
UL 1414 (UR = 250 V AC) E 73869 E 73869
CSA = Canada C 22.2 No.8 53108 53108
C 22.2 No.1 (UR = 125 V AC) 53108
(≤ 0.47 µF)
MARKING
•RIFA
•RIFA article code
•Rated capacitance
•Capacitance tolerance code
•Rated voltage
•X2
•SH, for self healing
•Approval marks
•Manufacturing code (year, month)
•Climatic category according to
IEC 60068-1, appendix A
•Passive flammability class
ORDERING INFORMATION
Article code
1st block 2nd block
See article table If not standard lead length, add R06 to R50
Pos. 13, capacitance tolerance code: in pos. 14–16,
M = ± 20%, K = ± 10% option Reel taped: Add 17T0 or 17T1 in pos. 15–18.
For packing on trays (6 mm lead length),
add L2 in pos. 17–18.
P H E 8 2 0 M/E B 5 3 3 0 M R 0 6
123456 7 8 910111213 141516 171819 20
PACKING
The box dimensions for bulk packaging are
245 x 145 x 80 mm. Quantity/package as
per article table.
Reels with taped capacitors are packed 10
in a box with dimension 370 x 370 x 560
mm. Quantity/package as per article table.
The standard quantity/reel is for 360 mm
reel. If 500 mm reel is required, it must be
specified when ordering and the quantity is
2 x the given quantity.
