Buffet/Galley Connectors
Connectors, Receptacles & Plugs
belfuse.com/cinch
2
Buffet/Galley Connectors
The Buffet (Galley) Connectors are recognized as the industry standard by airframe and Galley equipment
Manufacturers worldwide.
Cinch Connectivity Solutions is a leader in quality and innovation in manufacturing this extensive line of connectors.
Manufactured using FAA approved Quality Assurance Procedures (FAR Part 2).
Cinch Connectivity Solutions produces high quality products. These products are intended to be used in accordance
with the specications described in this catalog. Any use or application that deviates from the stated operating
specications is not recommended and may be unsafe. A limited warranty is applicable. Except for obligations
assumed by Cinch Connectivity Solutions under warranty, Cinch will be not be liable for any loss, damage, repairs,
incidental or consequential damages of any kind, whether or not based upon expressed or implied warranty, contract,
negligence, or liability arising from the application or manufacture or repair of these products. This catalog is not a
contractual offering; it is for informational purposes only.
ACR-6-33 ACR-6-34
ACC-6-33 ACC-6-34 AC16534/-1
AC16706-1/-2/-5 AC16813 AC16707/-2
AC16371 ACC-6-21CG-3/4 AC13303/-1/-2
belfuse.com/cinch
3
Solder Contact or Screw Size Current Rating/Amps.
4 Ga.
10 Ga. or No. 4 Screw
12 Ga. or No. 2 Screw
80
30
10
Crimp Contact and AWG Wire Size Current Rating/Amps.
10 Ga. with 10 AWG
10 Ga. with 14 AWG
10 Ga. with 16 AWG
4 Ga. with 14 AWG
4 Ga. with 16 AWG
30
17
13
17
13
Electrical Data
Termination Type:
ACA =Crimp
AC. ACC = Solder or Screw-Post
(Screw size = No. 4 or No. 2 as shown for applicable connector)
Materials and Finishes:
Shells: Steel, Brass. or Aluminum
(finish as noted per connector)
Contacts: Copper Alloy. Silver Plated
Operating Voltage:
28 VDC, 120 VAC
Contact Electrical Ratings:
NOTE: Current ratings are for bundled cables
A Manufacturer of Quality Connectors
PART NUMBER CROSS REFERENCE
RECEPTACLES PLUGS
Cinch ITT CANNON Cinch ITT CANNON
ACIH·33 (CIUllPJ Not Available ACR-6-34
(CRIMP) Not Available
ACC13303-2 CA13303·2 ACC-6-34 BUC-6-34
ACC13303-1 CA13303·t AC16706-5S' Not Available
ACC13303 CA13303 AC16706-5 CA16706-5
ACC-6-33 BUC-6-33 AC16706-1S' Not Available
ACC-6-21 CG-3/4 BUC-6-21CG-3/4 AC16706-1 CA16706-1
AC16707-2 CA16707-2 AC16534-1S' Not Available
AC16707 CA16707 AC16534-1 CA16534-1
AC16371 CA1637t AC16534 CA16534
AC16113 CA16813
AC16706-2 CA16706-2
MATING
GUIDE
PLUGS (PIN CONTACTS)
ACR-6-34
(CRIMP)
ACC-6-34
AC16706-5S'
AC16706-5
AC16706-1S'
AC16706-1
AC16534-1S’
AC16534-1
AC16534
AC16113
AC16706-2
RECEPTACLES
(SOCKET CONTACTS)
ACR-6-33 (CRIMP ) X X
ACC-6-33 X X
ACC-6-21 CG-3/4 X X
AC16707 X X X
AC16707-2 X X
AC16371 XXXX
ACC13303
ACC13303-1
ACC13303-2
“NOTE • = Stainless Steel Shell
“ACC-and are registered trademarks of Cinch Connectivity Solutions
CONTACT PIN DESCRIPTION ACRTC01 SETTING
806-0599-130 #10P-10 AWG 8
857-0591-130 #10S-10 AWG 8
806-0599-130/A #10P-12-AWG 5
857-0591-130/A #10S-12 AWG 5
806-0599-130/B #10P-14/16 AWG 5
857-0591-130/B #10S-14/16 AWG 5
806-0598-130 #4P-14/16 AWG 5
85 7-0590-130 #4S-14/16 AWG 5
USED WITH ACRTC01
ACRTCK TOOL KIT
PART NUMBER OR IDENTIFYING
NUMBER NOMENCLATURE DESCRIPTION
ACRTC01 CRIMP TOOL
ACRTC01/A ADAPTER
ACRTC01/B ADAPTER
ACRTC01 /C ADAPTER
M81969/14-05 PLASTIC REMOVAL TOOL
M81969/14-06 PLASTIC REMOVAL TOOL
Termination Tooling
4
A Manufacturer of Quality Connectors
PART NUMBER CROSS REFERENCE
RECEPTACLES PLUGS
Cinch ITT CANNON Cinch ITT CANNON
ACIH·33 (CIUllPJ Not Available ACR-6-34
(CRIMP) Not Available
ACC13303-2 CA13303·2 ACC-6-34 BUC-6-34
ACC13303-1 CA13303·t AC16706-5S' Not Available
ACC13303 CA13303 AC16706-5 CA16706-5
ACC-6-33 BUC-6-33 AC16706-1S' Not Available
ACC-6-21 CG-3/4BUC-6-21CG-3/4 AC16706-1 CA16706-1
AC16707-2 CA16707-2 AC16534-1S' Not Available
AC16707 CA16707 AC16534-1 CA16534-1
AC16371 CA1637t AC16534 CA16534
AC16113 CA16813
AC16706-2 CA16706-2
CONTACT PIN DESCRIPTION ACRTC01 SETTING
806-0599-130 #10P-10 AWG 8
857-0591-130 #10S-10 AWG 8
806-0599-130/A #10P-12-AWG 5
857-0591-130/A #10S-12 AWG 5
806-0599-130/B #10P-14/16 AWG 5
857-0591-130/B #10S-14/16 AWG 5
806-0598-130 #4P-14/16 AWG 5
85 7-0590-130 #4S-14/16 AWG 5
USED WITH ACRTC01
Solder Contact or Screw Size Current Rating/Amps.
4 Ga.
10 Ga. or No. 4 Screw
12 Ga. or No. 2 Screw
80
30
10
Crimp Contact and AWG Wire Size Current Rating/Amps.
10 Ga. with 10 AWG
10 Ga. with 14 AWG
10 Ga. with 16 AWG
4 Ga. with 14 AWG
4 Ga. with 16 AWG
30
17
13
17
13
ACRTCK TOOL KIT
PART NUMBER OR IDENTIFYING
NUMBER NOMENCLATURE DESCRIPTION
ACRTC01 CRIMP TOOL
ACRTC01/A ADAPTER
ACRTC01/B ADAPTER
ACRTC01 /C ADAPTER
M81969/14-05 PLASTIC REMOVAL TOOL
M81969/14-06 PLASTIC REMOVAL TOOL
MATING
GUIDE
PLUGS (PIN CONTACTS)
ACR-6-34
(CRIMP)
ACC-6-34
AC16706-5S'
AC16706-5
AC16706-1S'
AC16706-1
AC16534-1S’
AC16534-1
AC16534
AC16113
AC16706-2
RECEPTACLES
(SOCKET CONTACTS)
ACR-6-33 (CRIMP ) X X
ACC-6-33 X X
ACC-6-21 CG-3/4 X X
AC16707 X X X
AC16707-2 X X
AC16371 XXXX
ACC13303
ACC13303-1
ACC13303-2
Electrical Data
Termination Tooling
Termination Type:
ACA =Crimp
AC. ACC = Solder or Screw-Post
(Screw size = No. 4 or No. 2 as shown for applicable connector)
Materials and Finishes:
Shells: Steel, Brass. or Aluminum
(finish as noted per connector)
Contacts: Copper Alloy. Silver Plated
Operating Voltage:
28 VDC, 120 VAC
Contact Electrical Ratings:
NOTE: Current ratings are for bundled cables
“NOTE • = Stainless Steel Shell
“ACC-and are registered trademarks of Cinch Connectivity Solutions
belfuse.com/cinch
5
ACR-6-33/*
ACR·6·33/B
(B=Without Socket Contacts)
A six-contact Receptacle, ACR-6-33 has an
aluminum alloy shell with anodized finish.
Insulating material is PPS. Three #4 socket
and three #10 socket crimp contacts are
silver plated brass with crimp terminations.
NOTE: Shown with contacts installed for illustra live purposes
only.
ACR·6·34/*
ACR-6-34/A
(A=Without Pin Contacts)
A six-contact Plug, ACR-6-34 has an
aluminum alloy shell with anodized finish.
Insulating material is PPS. Three #4 pin and
three #1 O pin crimp contacts are silver
plated brass with crimp terminations.
NOTE: Shown with contacts installed for illuslra live purposes
only.
Contact Selector Guide
/* Quantity Contact Gauge Crimp well WireAWG ACR-6-33 Socket
Contact Part No.
ACR-6-34 Pin
Contact Part No.
/1
1
2
3
10
10
4
10
14/16
14/16
857-0591-130
857-0591-130/B
857-0590-130
806-0599-130
806-0599-130/B
806-0598-130
/2
2
1
3
10
10
4
10
14/16
14/16
857-0591-130
857-0591-130/B
857-0590-130
806-0599-130
806-0599-130/B
806-0598-130
/3 3
3
10
4
10
14/16
857-0591-130
857-0590-130
806-0599-130
806-0598-130
/4 3
3
10
4
14/16
14/16
857-0591-130/B
857-0590-130
806-0599-130/B
806-0598-130
6
*ACC™-6-33
A six-contact Receptficle, ACC-6-33 has an
aluminum alloy shell with anodized finish.
Insulating material is PPS. Three #4 socket
and three #10 socket contacts are silver
plated brass solder cup termination.
*see part ACR-6-33 for crimp termination equivalent.
AC16534
A two contact Plug, AC16534 has a stainless
steel shell with natural finish. Insulating material is
PPS. Brass contacts are silver plated. Screw-type
termination.
NOTE: Consult factory for availability.
*ACC™-6-34
A six-contact. Panel Mount Plug, ACC-6-34
has an aluminum alloy shell with anodized
finish. Insulating material is PPS. Three #4
pin and three #10 pin contacts are silver
plated brass with solder cup termination.
·see part ACR-6-34 for crimp termination equivalent.
AC16534-1
A two contact Plug, AC16534-1 has a nickel plated
brass shell. Insulating material is PPS. Brass
contacts are silver plated. Screw-type termination.
Also available in stainless steel as part number
AC16534-1 S.
belfuse.com/cinch
7
AC16706-1
A three contact Plug, AC16706-1 has a nickel
plated brass shell. Insulating material is PPS.
Brass contacts are silver plated. Screw-type
termination. Also available in stainless steel as
part number AC16706-1 S.
AC16706-5
A four contact Plug, AC16706-5 has a nickel
plated brass shell. Insulating material is PPS.
Brass contacts are silver plated. Screw-type
termination. Also available in stainless steel as
part number AC16706-5S.
AC16706-2
A three contact Plug, AC16706-2 has a nickel
plated brass shell. Insulating material is PPS. Brass
contacts are silver plated. Screw-type termination.
NOTE: Consult factory for availability.
AC16813
A two contact Plug, AC16813 has a stainless
steel shell with natural finish. Insulating material is
PPS. Brass contacts are silver plated. Screw-type
termination.
NOTE: Consult factory for availability
8
AC16707
A three contact Receptacle, AC16707 has
a stainless steel shell with natural finish.
Insulating material is PPS. Brass contacts
are silver plated. Screw-type termination.
AC16371
A two contact Receptacle, AC 16371 has
a stainless steel shell with natural finish.
Insulating material is PPS. Brass contacts
are silver plated. Screw-type termination.
AC16707-2
A four contact Receptacle, AC 16707-2 has
a stainless steel shell with natural finish.
Insulating material is PPS. Brass contacts
are silver plated. Screw-type termination.
AC™16813
A six contact Receptacle, ACC-6-21CG-3/4
has an aluminum alloy shell with anodized
finish. Insulating material is PPS. The three
#4 Socket and three #10 Socket Contacts
are silver plated brass with solder cup
termination.
belfuse.com/cinch
9
Limit Switch
Both AC13303-1 and AC13303-2 may
be used with a limit switch, (AN3134-1 or
MS25253-1) supplied by the customer. If a
limit switch is to be supplied by Cinch, the
connector part number will read AC 13303-1
LS or AC 13303-2LS.
AC13303-1
AC13303-1 is a Warmer (Hot cup) panel-
type Receptacle. The insulating material is
made of Melamine for higher temperature
resistance. It is supplied with an actuator for
a limit switch.
AC13303
AC13303 is a Warmer (Hot cup) panel-type
Receptacle. The insulating material is made
of fabricated phenolic.
AC13303-2
AC13303-2 is a Warmer (Hot cup) panel-
type Receptacle with a longer base. The
insulating material is made of Melamine for
higher temperature resistance. It is supplied
with an actuator for a limit switch.
10
AC16099
AC16099 is a two contact (Hot jug) panel-type
Receptacle. The insulating material is a black
thermoplastic. The contacts are copper alloy,
silver-plated with screw-type termination.
ACHC-3-13
A three contact Receptacle, ACHC-3-13 has an
aluminum alloy shell with anodized finish. The 2
#6 and 1 #12 socket contacts are copper alloy,
silverplated. Screw-type termination.
Cinch Connectivity Solutions produces high quality products. These products are intended to be used in accordance with the specifications described in this catalog. Any
use or application that deviates from the stated operating specifcations is not recommended and may be unsafe. A limited warranty is applicable except for obligations
assumed by Cinch Connectivity Solutions under warranty.
Cinch will not be liable for any damages or repairs, incidental or consequential damages of any kind, whether or not based upon expressed or implied warranty, contract,
negligence, or liability arising from the application or manufacture or repair of these products. This catalog is not a contractual offering, it is for informational purposes
only.
belfuse.com/cinch
11
Other Quality Connectors
QPL’d MIL-C-5015 & Special Connectors
for Commercial Applications
QPL’d MIL-C-26482 Series I
Solder and Crimp Connectors
Dura-ConTM
Microminiature-D Connectors
Quick Disconnect Connectors
Solder and Crimp Types
Buffet/Galley Connectors
Solder and Crimp Connectors
Filtered Connectors
Solder and Crimp Connectors
Omega
MIL-C-26500 – Cylindrical Connectors
Expanded Beam Fiber Optics
Rugged Acme Thread Connectors
for Industrial Electrical Equipment
Special Cryogenic Connectors
About Cinch
© 2015 Cinch Connectors, Inc.
br-CCS-CIRC-Mil-Aero-Circulars-Galley-Connectors.pdf
About Cinch Connectivity Solutions
In operation since 1917, Cinch Connectivity Solutions
supplies high quality, high performance connectors
and cables globally to the Aerospace, Military-Defense,
Broadcast, Commercial Transportation, Fiber Optic
Connectivity, Healthcare, Oil & Gas, High End Computer,
Wireless Communications, and other markets. We provide
custom solutions with our creative, hands on engineering
and end to end approach.
For more information, visit belfuse.com/cinch
Cinch Connectivity Solutions
US Headquarters
1700 Finley Road
Lombard, IL 60148 USA
+1 630.705.6000
inquiry@us.cinch.com
299 Johnson Drive SW
Suite 100
Waseca, MN 56093 USA
+1 507.833.8822
ccsorders@us.cinch.com
Cinch Connectivity Solutions Ltd
European Headquarters
11 Bilton Road
Chelmsford, Essex CM1 2UP UK
+44 (0) 1245 342060
CinchConnectivity@eu.cinch.com
Cinch Connectivity Solutions
Asia Pacic Headquarters
Building 1, No. 800 ShenFu Road
XinZhuang Industry Park
Shanghai, China 201108
+86 21 5442 7668
ccs.asia.sales@as.cinch.com