R SM ELECTRON/SENSITRO SUE D Mm 7503450 oO00925 253 mm SEN T- 03-01 SENSITRON DATASHEET 111 REVISION MELF STYLE (SQUARE ENDCAPS) HERMETIC SURFACE MOUNT RECTIFIERS GENERAL PURPOSE (Tir < 2000 nsec) MAXIMUM AVERAGE PEAK PEAK DeouTPUT _| SINGLE MAXIMIM INVERSE CURRENT CYCLE MAXIMUM FORWARD | MAXIMUM REVERSE | REVERSE | THERMAL TYPE VOLTAGE SURGE VOLTAGE (PULSED) CURRENT AT PIV {RECOVERY/RESISTANCE| PKG NUMBER AMPS (8.3) TIME STYLE VOLTS | Ta = 55C Oloee amps | votts | amps | 25 | 100 | nsec oCW INSBTaUS | 200 16 40 | 50 ia | 30 | 65 35 | 2000 10 IN5616US 400 10 40 50 13 30 05 25 2000 10 IN5618US 600 10 4.0 50 3 30 0.5 28 2000 10 MELF-1 IN56820US 300 1.6 40 50 13 30 05 25 2060 10 IN5622US 1000 14 40 50 13 30 05 25 2000 10 SSM5550 200 3.0 6.0 150 1.2 9.0 10 75 2000 8 SSM5551 400 3.0 6.0 150 1.2 90 1.0 75 2000 8 SSM5552 600 3.0 6.0 150 1.2 9.0 1.0 75 2000 8 MELF-B SSM5553 800 3.0 6.0 150 1.3 9.0 1.0 75 2000 8 SSM5554 1000 3.0 6.0 150 13 90 1.0 75 2000 8 FAST RECOVERY (150 nsec < Trr < 500 nsec) Nessus | 200] 10 30 7 ie 7 30 7 0S 35 150 10 inset7us | 400 | 10 30 | 25 is | 30 | os 25 150 10 IN5619US 600 1.0 3.0 25 1.6 3.0 05 25. 250 10 MELF-1 insezius | 800 10 30 | 25 16 | 30 | 08 25 250 10 IN5623US 1000 1.0 3.0 25 16 3.0 05 25 500 0 SSM5415 50 3.0 60. 80 15 90 1.0 20 150 8 ssmsaic | 10 | 30 60 | 80 15 | 90 10 20 150 8 SSM5417 200 3.0 6.0 80 1.5 9.0 1.0 20 150 8 MELF-B SSM5418 400 3.0 6.0 80 15 90 1.0 20 150 8 ssms4i9 | 50 | 30 60 | 80 is | 90 10 20 250 8 ssmsa20 | 600 | 30 60 | 80 15 | 90 10 20 400 8 SSMFR3100 | 1000 | 3.0 70 | 100 | 175 | 90 | 50 | 100 | 225 5 | MELF-S SUPER FAST RECOVERY (25 nsec < Trr < 70 nsec) SSM5807 50 3.0 8.0 125 925 6 50 150 30 8 MELF-B SSM5809 100 3.0 8.0 125 925 6 5.0 150 30 8 MELF-B SSM5811 150 3.0 80 125 925 6 50 150 30 8 MELF-B $SM12083 200 1.0 5.0 35 1.0 25 1.0 50 25 12 MELF-2 SSM320S83 200 3.0 90 100 11 50 50 100 30 5 MELF-3 SSM26083 600 2.0 6.0 50 2.4 20 5.0 100 30 5 MELF-3 SSM360S7 600 3.0 6.0 100 13 3.0 5.0 100 70 8 MELF-B ~ 1SSM1100HE 1000 1.0 24 20 17 0.75 50 50 60 10 MELF-1t SSM6631 1000 14 40 60 1.6 14 40 1000 60 8 MELF-B Note: Shaded devices are qualified and availabie to the JANTX and JANTXY levels IAW MILS19500. Full MIL~S19500 JANTX level screening is available on all types. Tec = Endcap temperature. Endcaps have to be heat sunk sufficiently to remove dissipated power in order to acheive this rated current. Tir conditions If = 0.5A, Ir = 1.0A, Irr = 0.25A. @ Maximum thermal resistance, junction to endcaps. @T,= 150C ~All ratings are at Ta = 25C unless otherwise specified. - Maximum operating and storage temperature range 65C to +175C. JR SM ELECTRON/SENSITRO SHE D SHD-1 / SHD-2 / SHD-3 Me 7503650 o0009eb 19T mm SEN SENSITRON DATASHEET 111 REVISION HIGH CURRENT HERMETIC SURFACE MOUNT RECTIFIERS T-03-01 SCHOTTKY RECTIFIERS PEAK | do ourpUT | MAXIMUM FORWARD VoLTAGe | MAXIMUM REVERSE TUNGTION_| waxiaun TYPE | INVERSE | cup penT CURRENT AT PIV |CAPACITANCE | THERMAL [PACKAGE NUMBER | VOLTAGE Te = 100C TG EG Ta 125% Vr=5V RESISTANCE STYLE d O.4.<f<1 MHZ VOLTS | AMPS | VOLTS | AMPS | VOLTS] AMPS | MA | MA pF CW SHD1151 30 60 a | 30 | a7 | 30 | 50 | 280 3700 10 | SHD-2 SHDT141 30 10 oS | io | 52 | 10 | 75 | 150] 7500 05 | SHD3 SHD1162 45 10 5 | 10 | 40 | 00 | 20 | 1 1000 15 | SHD- SHD1152 3 75 ms | 50 | 38 | 50 | 50 | 4 2600 a SHD1142 45 150 7s | 150 | 73 | 1590 | 50 | 150 5000 05 | SHD-3 SHD1164 | 100 10 72 | to | 6 | 0 | 10 | 10 600 15 | SHD- SHDTI54 | 100 60 7 | 3 | 65 | 30 | 15 | 20 1400 10 | SHD-2 SHD1144 | 100 120 90 | 120 | 80 | 10 | 50 | 150 2700 05 | SHD-3 SUPERFAST RECOVERY RECTIFIERS PEAK AXIACW MAXIMUM FORWARD VOLTAGE | MME Re vERt MAXIMOR MAXIMUM TYPE | INVERSE | CURRENT recovery | THERMAL _|PACKAGE NUMBER | VOLTAGE Te=1 oe 25C 125C 25C 125C TIME @ RESISTANCE STYLE volts | AMPS | VoLTs| AMPS | VOLTS] AMPS | pA | mA nsec CW SHD3163 | 200 8 om | 8 | a7 | 8 25 10 30 20 | SHDA SHD3166 | 200 25 os | 2 | 875 18 35 70 35 15 | SHD-1 SHD3161 200 25 10 | 2 | 90 | 2 | 0 10 40 15 | SHD-1 SHD3155 | 200 70 975 | 70 | 875 | 70 | 100 | 20 50 10 | SHD-2 SHD3162 | 300 25 10 | 2 | 90 | 2 | 50 50 40 15 | SHD-4 SHD3i64 | 400 8 120 | 8 | 140 | 8 25 10 45 20 | SHD-1 SHD3153 | 400 30 720 | 30 | 140 | 30 | 28 10 50 15 | SHD2 SHD3156 | 400 70 120 | 70 | 140 | 70 | 10 | 20 60 10 | SHD-2 SHD3165 | 600 8 730 | 8 | 120 | 8 25 70 60 20 | SHD-1 SHD3154 | 600 30 130 | 30 | 120 | 30 | 25 10 70 15 | SHD-2 SHD3157 | 600 70 130 | 70 | 120 | 70 | 10 | 20 75 10 | SHD-2 Full MIL-S19500 JANTX level screening is available on all part types. @ Maximum DC ouput current with cathode surface maintained at Tc = 100C. @ Maximum thermal resistance, junction to cathode. Tj= 110C, Vr= 20V Trr conditions If = 0.5A, Ir= 1.0A, Irr = 0.25A All ratings are at Ta = 25C unless otherwise specified. - Maximum operating and storage temperature range -55C to +175C (150C for 30 volt schottky devices.)R SM ELECTRON/SENSITRO SHE D M@ 7503650 000092? O2b Ml SEN SENSITRON DATASHEET 111 REVISION PACKAGE OUTLINES T-03-01 MELFS C DIMENSIONS ~ INCHES (MM) >| |< 8 PACKAGE 7 STYLE A B c D .168/.200 | .019/.028 | .003MIN | .091/.103 D MELF-A | 4.015.1) | (48/72) | (076) | (2.3/3.3) + MeELF-B | 200/225 | .019/.028 | .003MIN | .137/.148 _ (5.05.8) | (48/72) } (.076) (3.4/3.8) Meur-1 | -168/-230 | .019/.028 | .003MIN | .091/.128 0.20 R MAX. (4.2.9) | (48/72) | (076) (3.4/3.8) MELF-2 | 205/235 | .019/.028 | .003MIN | .145/.150 (5.26.0) | (48/72) | (076) (3.6/3.8) MeELF-3 | -240/.260 | .024/.030 | .003 MIN | .155/.160 (6.0/6.6) | (60/77) (.076) (3.9/4.1) Endcap materialcopper. Finishhot solder dipped. Cathode indicated by dark colored band on light body. SHD-1 / SHD-2 / SHD-3 DIMENSIONS INCHES (MM) |< A->| PACKAGE A 8 + STYLE MIN MAX MIN MAX A 215 235 _ 095 | SHO-1 | 64) (6.0) (2.5) ~~ 305 325 095 Ring Frame + SHD-2 |) (77) (8.3) - (25) BS SHD-3 395 A15 067 077 4 (10) (10.6) (1.70) (1.96) / B Base and lid materials molybdenum. (Gold plated or hot solder dipped.) ASSEMBLY NOTES Devices are suitable for use with standard belt reflow or vapor phase techniques. A 63/67 Pb/ Sn preform of .004 inches minimum is preferred. The maximum process temperature to be used should be 250C for 1 minute. Note: The cathode surface is the surface that should be connected to the heat sink surface to achieve rated power levels. 7