5MP2 SERIES
Metallized
Polypropylene
Metallized Polypropylene
Switching power supply capacitors that require snubber and high current
applications. Voltage: 400 to 2000VDC: Capacitance as high as l0.0µf; ESR as
low as 0.005OHMS; ESL as low as 18nH; RMS current to 48.4amps; UL94-VO
ame retardant; three congurations; with axial leads or tab terminations.
FEATURES STANDARD CONFIGURATION
-Low loss polypropylene
dielectric
-High Power Rugged
construction
-Tested for high peak currents
-Smaller size
-UL 94-VO ame retardant
-Low inductance
-High RMS capability
-Low impedance and ESR
-5MP22: axial leads
-5MP26: radial tabs/low prole
-5MP27: radial tabs/high prole
Rev. 2
 Specication Summary
Capacitance Range
0.47µF to 10.0µF
Capacitance Tolerance
Standard tolerance is ±10%. Tolerances of ±5%, ±2% & ±1%
are also available.
Operating Temperature Range
-55°C to +105°C
Enclosure/ Construction
Extended Foil
Voltage Rating
VDC at 400VDC to 2000VDC VAC at 230VAC to 460VAC
Quality Control
Capacitors are tested 100% for:
o Capacitance tolerance
o Dissipation Factor
o Dielectric withstanding voltage
o Insulation Resistance
o Equivalent Series Resistance (ESR)
Process and inspection data are maintained on le and available
on special request.
Environmental
Parameter Method Condition
Vibration 204 D
Immersion 104 B
Shock 213 I
Humidity 106 -
Thermal Shock 107 A
Life 108 F
Reference MIL-STD-202
 Characteristics
Insulation Resistance
Temperature(°C) 25 85 105 
Megaohmsx
Microfarads
50,000 5,000 150
Insulation Resistance
Dielectric Strength
Capacitors withstand a DC potential of 1.5 x rated
voltage for one (1) minute without damage or
breakdown. Test Voltage is applied and discharged
through a minimum resistance of 100 OHMS per volt.
Capacitance Change
Temperature(°C) -55 25 85 105
Percentage
Change(Typical)
1.4 0 -2.5 -3.5
CapacitanceChange
Dissipation Factor
When measured at 1kHz, the dissipation factor will not exceed
0.1%.
Rev. 2
ELECTRICAL DATA
EC Part Number CAP 
µf VDC VAC
ESR 
100kHz
OHMS
MAX
MAXIMUM RIPPLE
CURRENT IN AMPS 20kHz I PEAK
AMPS
dv/dt
V/µs
(TYP) 
ESL 
nH
(TYP)
kHz F res
TEMPERATURES
25°C 50°C 85°C 105°C
5MP2_J474K 0.47 400 230 0.016 5.3 4.4 2.7 0.7 79 168 18 1710
5MP2_J684K 0.68 400 230 0.015 6.2 5.2 3.2 0.8 97 143 22 1312
5MP2_J105K 1.00 400 230 0.010 8.1 6.8 4.2 1.0 143 143 22 1082
5MP2_J155K 1.50 400 230 0.007 10.8 8.9 5.5 1.3 214 143 22 884
5MP2_J205K 2.00 400 230 0.006 13.1 10.9 6.7 1.6 285 143 22 765
5MP2_J225K 2.20 400 230 0.006 14.0 11.6 7.1 1.7 314 143 22 730
5MP2_J335K 3.30 400 230 0.005 16.5 13.7 8.4 2.0 471 143 22 596
5MP2_J475K 4.70 400 230 0.006 17.2 14.3 8.8 2.1 421 89 35 392
5MP2_J685K 6.80 400 230 0.007 18.0 15.0 9.2 2.2 443 65 50 274
5MP2_J106K 10.00 400 230 0.005 23.2 19.3 11.9 2.8 652 65 50 226
5MP2_K474K 0.47 600 230 0.011 7.9 6.6 4.1 1.0 118 251 18 1710
5MP2_K684K 0.68 600 230 0.008 10.3 8.6 5.3 1.3 171 251 18 1422
5MP2_K105K 1.00 600 230 0.006 13.5 11.2 6.9 1.6 251 251 18 1173
5MP2_K155K 1.50 600 230 0.005 16.0 13.3 8.2 1.9 321 214 22 884
5MP2_K205K 2.00 600 230 0.005 17.5 14.6 9.0 2.1 428 214 22 765
5MP2_K225K 2.20 600 230 0.010 13.5 11.2 6.9 1.6 249 113 42 522
5MP2_K335K 3.30 600 230 0.007 17.9 14.9 9.1 2.2 373 113 42 426
5MP2_K475K 4.70 600 230 0.006 22.7 18.9 11.6 2.8 532 113 42 357
5MP2_N305K 3.00 800 230 0.005 41.9 34.9 21.4 5.1 856 285 22 625
5MP2_N405K 4.00 800 230 0.005 42.6 35.5 21.8 5.2 880 220 28 473
5MP2_N505K 5.00 800 230 0.005 42.7 35.6 21.8 5.2 895 179 35 379
5MP2_N605K 6.00 800 230 0.005 42.7 35.5 21.8 5.2 905 151 42 316
5MP2_N705K 7.00 800 230 0.005 42.5 35.3 21.7 5.2 913 130 50 270
5MP2_N805K 8.00 800 230 0.005 42.3 35.2 21.6 5.1 918 115 57 236
5MP2_BN105K 1.00 1200 460 0.005 37.5 31.2 19.2 4.6 1076 1076 20 1120
5MP2_BN155K 1.50 1200 460 0.005 42.3 35.2 21.6 5.1 1143 762 28 782
5MP2_BN205K 2.00 1200 460 0.005 45.8 38.1 23.4 5.6 1219 610 34 609
5MP2_BN255K 2.50 1200 460 0.005 47.9 39.9 24.5 5.8 1270 508 41 498
5MP2_BN305K 3.00 1200 460 0.005 48.4 40.3 24.7 5.9 1276 425 49 416
5MP2_BN335K 3.30 1200 460 0.005 47.1 39.2 24.1 5.7 1232 373 56 371
5MP2_BT105K 1.00 1600 460 0.005 34.6 28.8 17.7 4.2 813 813 34 862
5MP2_BT135K 1.30 1600 460 0.005 37.8 31.4 19.3 4.6 881 677 41 691
5MP2_BT155K 1.50 1600 460 0.005 37.3 31.0 19.0 4.5 851 567 49 588
5MP2_BT185K 1.80 1600 460 0.005 39.1 32.5 20.0 4.8 896 498 56 502
5MP2_P105K 1.00 2000 460 0.005 33.7 28.0 17.2 4.1 709 709 49 721
5MP2_P125K 1.20 2000 460 0.005 35.5 29.5 18.1 4.3 746 622 56 615
Note: RMS currentratingsbasedon maximumcapability of thecapacitorelement.For capacitorstyle with leads, theRMS currentratingis
limited by thelead wire as follows: #16: 19 AMPS; #18: 16 AMPS; #20: 12 AMPS.
Rev. 2
EC PART
NUMBER
CAP
µf
AXIAL LEADS 5MP22 LOW PROFILE 5MP26 HIGH PROFILE 5MP27
T
MAX
H
MAX
L
±0.062 AWG T
MAX
H
MAX
L
±0.062
S
+0.093,
-0.062
T
MAX
H
MAX
L
±0.062
S
+0.093,
-0.062
5MP2_J474K 0.47 0.260 0.453 1.125 20 - - - - - - - -
5MP2_J684K 0.68 0.294 0.486 1.250 20 - - - - - - - -
5MP2_J105K 1.00 0.366 0.559 1.250 20 - - - - - - - -
5MP2_J155K 1.50 0.461 0.653 1.250 20 - - - - - - - -
5MP2_J205K 2.00 0.541 0.734 1.250 20 - - - - - - - -
5MP2_J225K 2.20 0.539 0.794 1.250 20 - - - - - - - -
5MP2_J335K 3.30 0.681 0.953 1.250 20 0.953 0.681 1.250 1.690 0.681 0.953 1.250 1.690
5MP2_J475K 4.70 0.638 0.893 1.750 18 0.893 0.638 1.750 2.190 0.638 0.893 1.750 2.190
5MP2_J685K 6.80 0.658 0.912 2.250 18 0.912 0.658 2.250 2.690 0.658 0.912 2.250 2.690
5MP2_J106K 10.00 0.817 1.072 2.250 18 1.072 0.817 2.250 2.690 0.817 1.072 2.250 2.690
5MP2_K474K 0.47 0.418 0.611 1.125 20 - - - - - - - -
5MP2_K684K 0.68 0.514 0.707 1.125 20 - - - - - - - -
5MP2_K105K 1.00 0.635 0.828 1.125 20 0.828 0.635 1.125 1.565 0.635 0.828 1.125 1.565
5MP2_K155K 1.50 0.726 0.919 1.250 20 0.919 0.726 1.250 1.690 0.726 0.919 1.250 1.690
5MP2_K205K 2.00 0.848 1.041 1.250 20 1.041 0.848 1.250 1.690 0.848 1.041 1.250 1.690
5MP2_K225K 2.20 0.632 0.825 2.000 18 0.825 0.632 2.000 2.440 0.632 0.825 2.000 2.440
5MP2_K335K 3.30 0.788 0.980 2.000 18 0.980 0.788 2.000 2.440 0.788 0.980 2.000 2.440
5MP2_K475K 4.70 0.953 1.145 2.000 18 1.145 0.953 2.000 2.440 0.953 1.145 2.000 2.440
5MP2_N305K 3.00 1.455 1.815 1.250 16 1.815 1.455 1.250 2.065 1.455 1.815 1.250 2.065
5MP2_N405K 4.00 1.455 1.815 1.500 16 1.815 1.455 1.500 2.315 1.455 1.815 1.500 2.315
5MP2_N505K 5.00 1.455 1.815 1.750 16 1.815 1.455 1.750 2.565 1.455 1.815 1.750 2.565
5MP2_N605K 6.00 1.455 1.815 2.000 16 1.815 1.455 2.000 2.815 1.455 1.815 2.000 2.815
5MP2_N705K 7.00 1.455 1.815 2.250 16 1.815 1.455 2.250 3.065 1.455 1.815 2.250 3.065
5MP2_N805K 8.00 1.455 1.815 2.500 16 1.815 1.455 2.500 3.315 1.455 1.815 2.500 3.315
5MP2_BN105K 1.00 1.455 1.815 1.250 16 1.815 1.455 1.250 2.035 1.455 1.815 1.250 2.035
5MP2_BN155K 1.50 1.455 1.815 1.500 16 1.815 1.455 1.500 2.285 1.455 1.815 1.500 2.285
5MP2_BN205K 2.00 1.455 1.815 1.750 16 1.815 1.455 1.750 2.535 1.455 1.815 1.750 2.535
5MP2_BN255K 2.50 1.455 1.815 2.000 16 1.815 1.455 2.000 2.785 1.455 1.815 2.000 2.785
5MP2_BN305K 3.00 1.455 1.815 2.250 16 1.815 1.455 2.250 3.035 1.455 1.815 2.250 3.035
5MP2_BN335K 3.30 1.455 1.815 2.500 16 1.815 1.455 2.500 3.285 1.455 1.815 2.500 3.285
5MP2_BT105K 1.00 1.455 1.815 1.750 16 1.815 1.455 1.750 2.535 1.455 1.815 1.750 2.535
5MP2_BT135K 1.30 1.455 1.815 2.000 16 1.815 1.455 2.000 2.785 1.455 1.815 2.000 2.785
5MP2_BT155K 1.50 1.455 1.815 2.250 16 1.815 1.455 2.250 3.035 1.455 1.815 2.250 3.035
5MP2_BT185K 1.80 1.455 1.815 2.500 16 1.815 1.455 2.500 3.285 1.455 1.815 2.500 3.285
5MP2_P105K 1.00 1.455 1.815 2.250 16 1.815 1.455 2.250 3.035 1.455 1.815 2.250 3.035
5MP2_P125K 1.20 1.455 1.815 2.500 16 1.815 1.455 2.500 3.285 1.455 1.815 2.500 3.285
Rev. 2
DIMENSIONAL DATA
Rev. 2
Rev. 2
ADDITIONAL INFORMATION
Electronic Concepts is the only major manufacturer to oer polypropylene capacitors in three dierent
congurations. Each is designed to ll a specic mechanical layout requirement; encompassing such
parameter goals as optimizing pcb density or spacing. Now for the rst time the circuit design dictates
which EC capacitor to select!
In addition, because radial tab terminals are available, greater reliability can be realized,
especially in hostile environments such as shock and vibration. Tabs also allow for lower
inductance and higher RMS current carrying capacities versus other brands that can only be
specied with wire leads. In addition, tabs oer the option of surface mounting.
HOW TO ORDER
TYPE
Metallized Polypropylene 5MP
STYLE / VOLTAGE
Axial Leads (26: radial tabs--low prole or 27: radial tabs--high prole); /
J=400VDC; K=600VDC; etc.
22 J
CAPACITANCE IN PICOFARADS
The rst two digits are signicat, the third represents the number of zeros
(e.g. 475=4700000pF)
335
TOLERANCE
K=±10% Other tolerances available. K
Marking and Date Code
All capacitors are marked with company initials "EC", corporate logo or EC trademark—in addition to type 5MP2, capacitance,
tolerance, rated DC working voltage and date code. The rst two digits of the date code represent the year, the second two digits the
week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009.
Quality Assurance
Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004 Certied Company. Raw material
inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the
EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology,
compact capacitor designs and establishing reliability procedures.
Sales Oces
United States Europe
Eastern:
*Headquarters*
P.O. Box 1278
Eatontown,NJ 07724
Tel: 732-542-7880
Fax: 732-542-0524
Central:
Illinois 630-668-8747
email: sales@ecicaps.com
website:www.ecicaps.com
Ireland
Electronic ConceptsEurope LTD
IDA Estate, Oughterad
Co. Galway, Ireland
tel: +353-91-552385,552432
fax: +353-91-552387
email: sales@ecicaps.ie
website:www.electronicconcepts.ie
Rev. 2