SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 1Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
DESCRIPTION
The SFH615A feature a variety of transfer ratios, low
coupling capacitance and high isolation voltage. These
couplers have a GaAs infrared diode emitter, which is
optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm lead spacing.
Creepage and clearance distances of > 8 mm are achieved
with option 6. This version complies with IEC 60950
(DIN VDE 0805) for reinforced insulation up to an operation
voltage of 400 VRMS or DC. Specifications subject to
change.
FEATURES
Excellent CTR linearity depending on forward
current
Isolation test voltage, 5300 VRMS
Fast switching times
Low CTR degradation
Low coupling capacitance
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Switchmode power supply
Telecom
Battery powered equipment
AGENCY APPROVALS
UL file no. E52744
cUL tested to CSA 22.2 bulletin 5A
DIN EN 60747-5-5 (VDE 0884-5) available with option 1
BSI EN 60950; EN 60065
•FIMKO
•CQC
Notes
Additional options may be possible, please contact sales office.
(1) Also available in tubes; do not add T to end.
(2) T3 rotation in tape and reel packaging.
1
2
4
3E
CA
C
17918-20
ORDERING INFORMATION
SFH615A- #X0##T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-4 SFH615A-1 SFH615A-2 SFH615A-3 SFH615A-4
DIP-4, 400 mil, option 6 SFH615A-1X006 SFH615A-2X006 SFH615A-3X006 -
SMD-4, option 7 - - SFH615A-3X007T (1) -
SMD-4, option 9 - SFH615A-2X009T SFH615A-3X009T (1) SFH615A-4X009
UL, cUL, VDE, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-4 SFH615A-1X001 SFH615A-2X001 SFH615A-3X001 SFH615A-4X001
DIP-4, 400 mil, option 6 SFH615A-1X016 SFH615A-2X016 SFH615A-3X016 SFH615A-4X016
SMD-4, option 7 SFH615A-1X017T (1) SFH615A-2X017T (1) SFH615A-3X017 SFH615A-4X017T (1)
SMD-4, option 9 - SFH615A-2X019T --
SFH615A-2X019T3 (2)
7.62 mm 10.16 mm
Option 7
Option 6
Option 9
DIP-4
> 8 mm 8 mm typ.
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 2Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
Note
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR6V
DC forward current IF60 mA
Forward surge current tp 10 μs IFSM 2.5 A
LED power dissipation at 25 °C Pdiss 70 mW
OUTPUT
Collector emitter voltage VCEO 70 V
Emitter collector voltage VECO 7V
Collector current IC50 mA
Collector peak current tp/T = 0.5, tp 10 ms ICM 100 mA
Ouput power dissipation at 25 °C Pdiss 150 mW
COUPLER
Operation temperature Tamb -55 to +100 °C
Storage temperature range Tstg -55 to +150 °C
Soldering temperature (1) 2 mm from case, 10 s Tsld 260 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 60 mA VF1.35 1.65 V
Reverse current VR = 6 V IR0.01 10 μA
Capacitance VR = 0 V, f = 1 MHz CO13 pF
OUTPUT
Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 5.2 pF
Collector emitter leakage current VCE = 10 V
SFH615A-1 ICEO 250nA
SFH615A-2 ICEO 250nA
SFH615A-3 ICEO 5 100 nA
SFH615A-4 ICEO 5 100 nA
COUPLER
Collector emitter saturation voltage IF = 10 mA, f = 1 MHz VCEsat 0.25 0.4 V
Coupling capacitance CC0.4 pF
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 3Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC/IF
IF = 10 mA, VCE = 5 V
SFH615A-1 CTR 40 80 %
SFH615A-2 CTR 63 125 %
SFH615A-3 CTR 100 200 %
SFH615A-4 CTR 160 320 %
IF = 1 mA, VCE = 5 V
SFH615A-1 CTR 13 30 %
SFH615A-2 CTR 22 45 %
SFH615A-3 CTR 34 70 %
SFH615A-4 CTR 56 90 %
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
NON-SATURATED
Turn-on time IF = 10 mA, VCC = 5 V, RL = 75 Ωton s
Rise time IF = 10 mA, VCC = 5 V, RL = 75 Ωtrs
Turn-off time IF = 10 mA, VCC = 5 V, RL = 75 Ωtoff 2.3 μs
Fall time IF = 10 mA, VCC = 5 V, RL = 75 Ωtfs
Cut-off frequency IF = 10 mA, VCC = 5 V, RL = 75 ΩfCO 208 kHz
SATURATED
Turn-on time
IF = 20 mA SFH615A-1 ton s
IF = 10 mA SFH615A-2 ton 4.2 μs
SFH615A-3 ton 4.2 μs
IF = 5 mA SFH615A-4 ton s
Rise time
IF = 20 mA SFH615A-1 trs
IF = 10 mA SFH615A-2 trs
SFH615A-3 trs
IF = 5 mA SFH615A-4 trs
Turn-off time
IF = 20 mA SFH615A-1 toff 18 μs
IF = 10 mA SFH615A-2 toff 23 μs
SFH615A-3 toff 23 μs
IF = 5 mA SFH615A-4 toff 25 μs
Fall time
IF = 20 mA SFH615A-1 tf11 μs
IF = 10 mA SFH615A-2 tf14 μs
SFH615A-3 tf14 μs
IF = 5 mA SFH615A-4 tf15 μs
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 4Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Test Circuit, Non-Saturated Operation
Fig. 2 - Test Circuit, Saturated Operation
Fig. 3 - Switching Times
Note
As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
Channel I
Channel II
95 10804-3
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
F
0
50 ΩRL
I
F
Oscilloscope
R
L
= 1 MΩ
C
L
= 20 pF
Channel I
Channel II
95 10843
RG= 50 Ω
tp
tp= 50 µs
T= 0.01
+ 5 V
IC
IF
0
50 Ω1 kΩ
IF= 10 mA
Oscilloscope
RL
CL20 pF
1 MΩ
tpt
t
0
0
10 %
90 %
100 %
tr
td
ton
tstf
toff
IF
IC
tpPulse duration
tdDelay time
trRise time
ton (= td + tr) Turn-on time
tsStorage time
tfFall time
toff (= ts + tf) Turn-off time
96 11698
SAFETY AND INSULATION RATINGS
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification According to IEC 68 part 1 55/115/21
Pollution degree According to DIN VDE 0109 2
Comparative tracking index Insulation group IIIa CTI 175
Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 4470 VRMS
Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5300 VRMS
Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak
Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak
Isolation resistance Tamb = 25 °C, VIO = 500 V RIO 1012 Ω
Tamb = 100 °C, VIO = 500 V RIO 1011 Ω
Output safety power PSO 700 mW
Input safety current ISI 400 mA
Input safety temperature TS175 °C
Creepage distance DIP-4 7mm
Clearance distance DIP-4 7mm
Creepage distance DIP-4, 400 mil, option 6 8mm
Clearance distance DIP-4, 400 mil, option 6 8mm
Creepage distance SMD-4, option 7 and option 9 7mm
Clearance distance SMD-4, option 7 and option 9 7mm
Insulation thickness DTI 0.4 mm
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 5Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 4 - Forward Voltage vs. Forward Current
Fig. 5 - Collector Current vs. Collector Emitter Voltage
(non-saturated)
Fig. 6 - Collector Current vs. Collector Emitter Voltage (saturated)
Fig. 7 - Leakage Current vs. Ambient Temperature
Fig. 8 - Normalized CTR (non-saturated) vs. Ambient Temperature
Fig. 9 - Normalized CTR (saturated) vs. Ambient Temperature
0.6
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.6
0.1 1 10 100
IF - Forward Current (mA)
V
F
- Forward Voltage (V)
Tamb = - 55 °C
1.5
0.7
Tamb = - 40 °C
Tamb = 0 °C
Tamb = 25 °C
Tamb = 50 °C
Tamb = 75 °C
Tamb = 100 °C
0
20
30
40
50
60
70
80
90
01 78
VCE - Collector Emitter Voltage (NS) (V)
I
C
- Collector Current (mA)
10
65432
I
F
= 20 mA
I
F
= 15 mA
I
F
= 10 mA
I
F
= 30 mA
I
F
= 5 mA
0
10
15
20
30
00.4
VCE - Collector Emitter Voltage (sat) (V)
I
C
- Collector Current (mA)
5
0.30.20.1
25
I
F
= 10 mA
I
F
= 25 mA
I
F
= 5 mA
I
F
= 2 mA
I
F
= 1 mA
0.001
0.01
0.1
10
1
100
1000
10 000
Tamb - Ambient Temperature (°C)
I
CE0
- Leakage Current (nA)
V
CE
= 40 V
-60 100-40 806040200-20
I
F
= 0 mA
V
CE
= 12 V
V
CE
= 24 V
0
0.2
0.6
0.4
0.8
1.0
1.4
Tamb - Ambient Temperature (°C)
CTR
Norm
- Normalized CTR (NS)
1.2
IF = 10 mA
VCE = 5 V
-60 100-40 806040200-20
0
0.2
0.6
0.4
0.8
1.0
1.4
Tamb - Ambient Temperature (°C)
CTR
Norm
- Normalized CTR (sat)
1.2
IF = 10 mA
VCE = 0.4 V
-60 100-40 806040200-20
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 6Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 10 - Normalized CTR (non-saturated) vs. Forward Current
Fig. 11 - Normalized CTR (saturated) vs. Forward Current
Fig. 12 - Phase Angle vs. Frequency
Fig. 13 - Cut-Off Frequency vs. Collector Current
Fig. 14 - Switching Time vs. Load Resistance
0
0.2
0.6
0.4
0.8
1.0
1.4
0.1 100
IF - Forward Current (mA)
CTR
Norm
- Normalized CTR (NS)
1.2
110
VCE = 10 V
Tamb = - 55 °C
Tamb = - 40 °C
Tamb = 0 °C
Tamb = 25 °C Tamb = 50 °C
Tamb = 75 °C
Tamb = 100 °C
0
0.2
0.6
0.4
0.8
1.0
1.4
0.1 100
IF - Forward Current (mA)
CTR
Norm
- Normalized CTR (sat)
1.2
110
Tamb = - 55 °C
Tamb = - 40 °C
Tamb = 0 °C
Tamb = 25 °C Tamb = 50 °C
Tamb = 75 °C
Tamb = 100 °C
VCE = 0.4 V
-140
-120
-100
-80
0
11000
f - Frequency (kHz)
Phase Angle (deg)
-20
10 100
V
CE
= 5 V
-40
-60
1
10
1000
0.1 100
IC - Collector Current (mA)
f
CTR
- CTR Frequency (kHz)
100
110
VCE = 5 V
0.1
1
10
1000
0.1 100
RL - Load Resistance (kΩ)
t
on
, t
off
- Switching Time (μs)
100
110
VCE = 5 V, IF = 10 mA
ton
toff
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 7Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENISONS in millimeters
PACKAGE MARKING (Example)
Notes
VDE logo is only marked on option 1 parts. Option information is not marked on the part.
Tape and reel suffix (T) is not part of the package marking.
i178027-10
6.5 ± 0.5
Pin 1 identier
0.26
7.62 to 9.98
7.62 ± 0.3
4.58 ± 0.5
2.54 ± 0.25
0.5 ± 0.1
0.85 ± 0.1
2.8 ± 0.5 3.3 ± 0.5
3.5 ± 0.3
0.5 typ.
12
43
20802-28
2.54
1.78 0.76
8 min.
1.52
11.05
R 0.25
2.54
1.78 0.76
7.7
1.52
11.05
R 0.25
10.16 typ.
7.62 typ.
Option 6
3.5 ± 0.3
0.1 min.
2.7 min.
8 min.
7.62 typ.
3.5 ± 0.3
0.6 min.
10.16 ± 0.3
Option 7
0.35
+ 0.25
- 0.3
Option 9
7.62 typ.
0.6 min.
0.1 ± 0.1 3.5 ± 0.3
8.16 ± 0.8
10.16 ± 0.3
SFH615A-3
V YWW 25
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 8Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKING INFORMATION
Fig. 15 - Tape and Reel Shipping Medium
Fig. 16 - Tape and Packing for Option 7 and Option 9
Fig. 17 - Tape Packing for Option 7 and Option 9, T3 Rotation (2000 units per reel)
DEVICE PER TUBE
TYPE UNITS/TUBE TUBES/BOX UNITS/BOX
DIP-4 100 40 4000
Regular, special,
or bar code label
Tape slot in core
13"
17999-1
Ø 1.55 ± 0.05 8 ± 0.1 2 ± 0.1 4 ± 0.1
7.5 ± 0.1
1.75 ± 0.1
16 ± 0.3
0.3 ± 0.05
22734
SFH615A
www.vishay.com Vishay Semiconductors
Rev. 1.4, 31-Aug-15 9Document Number: 83433
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SOLDER PROFILES
Fig. 18 - Wave Soldering Double Wave Profile According to
J-STD-020 for DIP-8 Devices
Fig. 19 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for SMD-8 Devices
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Floor life: unlimited
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
2 K/s
second
wave
first wave
wave
ca. 5 K/s
5 s
full line: typical
dotted line:
process limits
Time (s)
Temperature (°C)
300
250
200
150
100
50
0
050100
150 200 250
94 8626
Lead temperature
235 °C to
260 °C
100 °C to
130 °C
ca. 200 K/s
forced cooling
ca. 2 K/s
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s
max. ramp down 6 °C/s
19841
255 °C
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
SFH615A-1 SFH615A-2 SFH615A-3 SFH615A-4 SFH615A-1X006 SFH615A-1X001 SFH615A-1X016 SFH615A-
1X017 SFH615A-1X017T SFH615A-2X001 SFH615A-2X006 SFH615A-2X016 SFH615A-2X017 SFH615A-2X017T
SFH615A-2X019T SFH615A-3X001 SFH615A-3X006 SFH615A-3X007 SFH615A-3X007T SFH615A-3X008T
SFH615A-3X009 SFH615A-3X016 SFH615A-3X017 SFH615A-3X018 SFH615A-3X018T SFH615A-4X001
SFH615A-4X008T SFH615A-4X009 SFH615A-4X016 SFH615A-4X017 SFH615A-4X017T SFH615A-3X009T
SFH615A-2X009T SFH615A-1X008T