2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00198-16 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:20:49 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature csm no.: 100 Zoom: 100 Accessories Selection Guide Backshell EMI Shielded EMI Shielded EMI Shielded Metal Metal Metal Metal Plastic Plastic Plastic Plastic Plastic Plastic Plastic Style Snap-Together Metalized Plastic Straight Exit see page 200 Snap-Together Metalized Plastic 40 Exit see page 200 Die Cast Zinc Metal see page 202 Deep Straight Clamp see page 203 Round Cable Clamp see page 203 Short Straight Clamp see page 204 90 Entry see page 204 Snap-Together Universal see page 205 One-Piece Snap-Together see page 205 One-Piece Plastic Straight Exit see page 206 One-Piece Plastic 90 Exit see page 206 Dataphone see page 206 Quick Disconnect for IDC Cable see page 207 Quick Disconnect for Round Cable -- Straight and 90 Exit see page 207 Locking Hardware Sliding Lock Retainer Assembly Slide Lock Post see page 210 see page 211 -- -- Female Screw Lock see page 209 -- Male Screw Lock see page 208 -- Spring Latch Plate see page 212 -- Spring Latch see page 212 -- -- -- -- -- -- -- -- Z -- -- -- -- 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -- -- -- -- -- Z -- -- -- -- -- -- 1 1 1 1 -- -- 1 1 1 1 -- Z -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Z Supplied with backshell 1 Optional, compatible locking hardware -- Not compatible Dimensions are shown in mm (inch) Dimensions subject to change 198 198-K 198-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00199-13 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:20:51 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature csm no.: 100 Zoom: 100 Accessories Selection Guide Locking Hardware Locking Hook see page 207 -- Locking Spring see page 207 -- Jackscrew Assembly see page 213 -- Jackpost Assembly see page 213 -- Recessed Jackscrew see page 201 1 Extended Jackscrew see page 201 1 Thumbscrew see page 201 1 Jackpost for In-Line Connections see page 201 1 -- -- -- -- 1 1 1 1 -- -- -- -- -- -- -- -- -- -- -- 1 -- -- -- -- -- -- -- 1 -- -- -- -- -- -- -- 1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1 1 -- -- -- -- -- -- 1 1 -- -- -- -- -- -- Dimensions are shown in mm (inch) Dimensions subject to change 199-K 199-C 199 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00200-21 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:20:55 PM Operator: BC COLOR: BLACK TCP: 666 D Subminiature Accessories Typedriver Name: TS name csm no.: 100 Zoom: 100 EMI Shielded Backshell Snap-Together Metalized Plastic Metalized plastic backshells reduce EMI/RFI emissions. Metalized plastic provides a light weight solution. Design includes integral strain relieving cable clamp. CABLE CLAMP CABLE GROUNDING TANG Product Features 1 Improves conformance to FCC DOC #20780 shielding requirements 1 No crimp ferrule tooling needed 1 Quick and simple assembly using snaptogether design feature Attenuation Note: Cable grounding tang not available on DE size backshell. Specifications Attenuation: Temperature Range: Materials and Finishes -49dB @ 100 MHz -20 C to 80 C Material: Finish: Thermoplastic, UL 94V-0 rated Nickel over Copper Straight Exit C D OH MAX E A 16,990,30 (.669.012) B 1 Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws 1 Optional locking hardware sold separately, see page 201. Shell Part A Size Layout Number 0,15 (.006) DE 9 DE121073-154 24,95 (.982) DA 15 DA121073-150 33,30 (1.311) DB 25 DB121073-151 47,00 (1.850) DC 37 DC121073-152 63,45 (2.498) DD 50 DD121073-153 61,10 (2.410) B 0,30 (.012) 30,81 (1.213) 39,09 (1.539) 53,01 (2.087) 69,29 (2.728) 66,90 (2.634) 40 Exit C 0,30 (.012) 23,70 (.933) 31,80 (1.252) 45,01 (1.772) 60,30 (2.374) 58,30 (2.295) D 0,30 (.120) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) XH Max. 7,32 (.288) 8,31 (.327) 10,52 (.414) 12,32 (.485) 13,00 (.512) D E 1 Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws 1 Optional locking hardware sold separately, see page 201. B 0,30 (.012) 35,99 (1.417) 44,29 (1.744) 57,99 (2.283) 74,50 (2.933) 72,97 (2.873) C 0,30 (.012) 22,00 (.866) 27,31 (1.075) 41,00 (1.614) 57,51 (2.264) 54,99 (2.165) D 0,30 (.012) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) Cable Diameter Min. Max. 3,51 (.138) 7,49 (.295) 6,50 (.256) 8,99 (.354) 6,50 (.256) 11,00 (.433) 6,50 (.256) 11,00 (.433) 8,99 (.354) 13,00 (.512) Dimensions are shown in mm (inch) Dimensions subject to change 200 200-K Shell Part Size Layout Number DE 9 DE121073-54 DA 15 DA121073-50 DB 25 DB121073-51 DC 37 DC121073-52 DD 50 DD121073-53 200-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00201-16 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:25:26 PM Operator: GT COLOR: BLACK TCP: 666 D Subminiature Accessories Typedriver Name: TS name csm no.: 100 Zoom: 100 EMI Shielded Backshell Locking Hardware for Snap-Together EMI Shielded Backshell Recessed Jackscrew 4,50 (.177) O 4,50 (.177) Part Number: Material: Finish: Quantity Required per Connector: Extended Jackscrew 13,50(.531) 9,00 (.354) #4-40 THREADS 6,00 (.236) MIN 250-8501-004 Brass Nickel 2 Thumbscrew 19,00(.748) 4,30 9,00 (.354) (.169) O 4,10 (.161) Part Number: Material: Finish: Quantity Required per Connector: THREADS 6,00 (.236) MIN 250-8501-009 (M3) 250-8501-010 (#4-40) Brass Nickel 2 Part Number: Material: Finish: Quantity Required per Connector: 250-8501-013 Brass Nickel 2 Jackpost for In-Line Connections Rectangular Nut Jackpost Assembly Jackpost 11,00 (.433) 6,00 (.236) #4-40 UNC-2B #4-40 UNC-2A 4,90 (.193) 3,00 (.118) MIN 5,00 (.197) (ACROSS FLATS) 1 Assembly consists of 1 rectangular nut, 1 jackpost, 1 #4-40 lock washer. Part Number: Material: Finish: Quantity Required per Connector: D121073-19 Brass Nickel 2 Dimensions are shown in mm (inch) Dimensions subject to change 201-K 201-C 201 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00202-6 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:25:33 PM Operator: BC COLOR: BLACK TCP: 666 D Subminiature Accessories Typedriver Name: TS name csm no.: 100 Zoom: 100 EMI Shielded Backshell Die Cast Zinc Metal Backshell Straight Exit 9 and 15 Position 25 Position 37 and 50 Position C C C B B B A A A D D D OE Product Features 1 Improves conformance to FCC DOC #20780 shielding requirements 1 No crimp ferrule tooling needed 1 Kit consists of 1 front shell, 1 rear shell, 2 screws, 2 hex nuts, 2 mounting screws, 2 end brackets, 1 set of compression inserts (see this page) F F F Die cast metal backshells reduce EMI/RFI emissions. Die cast metal backshells offer improved shielding in a rugged package. OE OE Shell Part A Size Layout Number 0,13 (.005) DE 9 980-2000-345 31,12 (1.225) DA 15 980-2000-346 39,12 (1.540) DB 25 980-2000-347 53,09 (2.090) DC 37 980-2000-348 69,34 (2.730) DD 50 980-2000-349 66,70 (2.626) B 0,13 (.005) 37,21 (1.465) 40,64 (1.600) 39,37 (1.550) 45,72 (1.800) 45,72 (1.800) Specifications C 0,13 (.005) 15,75 (.620) 15,75 (.620) 17,53 (.690) 21,95 (.864) 21,95 (.864) D 0,13 (.005) 15,75 (.620) 15,75 (.620) 15,75 (.620) 15,75 (.620) 18,54 (.730) XE 0,13 (.005) 10,16 (.400) 10,16 (.400) 13,34 (.525) 18,44 (.726) 18,44 (.726) F 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,17 (1.857) 63,50 (2.500) 61,11 (2.406) Materials and Finishes Attenuation: Temperature Range: -50 dB @ 1000 MHz -20 C to 80 C Backshell Material: Backshell Finish: Compression Inserts: Hardware Material: Hardware Finish: Attenuation Diecast Shell Shielding Performance 0 Zinc Clear Zinc PVC Steel Clear Zinc -10 -20 -30 db -40 -50 -60 -70 100 1,000 Mhz Compression Inserts (Included With Die Cast Zinc Metal Backshell) Compression inserts accommodate a wide variety of cable sizes. Position 9, 15 25 37, 50 9 and 15 Position* 25 Position* 37 and 50 Position* 1 Cable Diameter .190/.350 .190/.460 .300/.680 1 2 6 2 3 5 3 5 4 3 2 1 4 4 5 * Inserts may be supplied mirror image Position 9, 15 25 37, 50 O.D. 12,07 (.475) 15,24 (.600) 16,64 (.655) I.D. 8,13 (.320) 11,43 (.450) 14,48 (.570) O.D. 9,14 (.360) 11,43 (.450) 17,78 (.700) #2 I.D. 8,00 (.315) 10,41 (.410) 15,75 (.620) O.D. 9,14 (.360) 11,43 (.450) 20,57 (.810) #3 I.D. 6,48 (.255) 9,40 (.370) 16,51 (.650) O.D. 9,14 (.360) 11,43 (.450) 16,64 (.655) #4 I.D. 7,24 (.285) 7,62 (.300) 12,70 (.500) O.D. 9,14 (.360) 11,43 (.450) 16,64 (.655) #5 I.D. 5,33 (.210) 5,84 (.230) 10,80 (.425) O.D. -- -- 16,64 (.655) #6 I.D. -- -- 8,89 (.350) Dimensions are shown in mm (inch) Dimensions subject to change 202 202-K #1 202-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00203-8 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:25:40 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name csm no.: 100 D Subminiature Accessories Zoom: 100 Metal Backshell Metal Backshell Metal Backshells provide strain relief. Various profiles available for different cable routing requirements. Product Features 1 Qualified to MIL-Spec M85049 Materials and Finishes Backshell Material: Finish: Low Carbon Steel Yellow Chromate over Cadmium Steel Hardware Material: Deep Straight Clamp 2X O 3,45 (.136) E CABLE ENTRY H MAX G 0,38 ,013 (.015 .005) D MAX B C A F CABLE ENTRY 1 Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE24657 DA24658 DB24659 DC24660 DD24661 Mil Spec Part Number M85049/48-1-1 M85049/48-1-2 M85049/48-1-3 M85049/48-1-4 M85049/48-1-5 A 0,38 (.015) 30,56 (1.203) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,572 (.0225) 12,484 (.4915) 12,484 (.4915) 12,484 (.4915) 12,484 (.4915) 15,253 (.6005) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D max. 14,68 (.578) 14,68 (.578) 14,68 (.578) 14,68 (.578) 17,45 (.687) E 0,38 (.015) 9,53 (.375) 18,11 (.713) 25,40 (1.000) 34,93 (1.375) 35,71 (1.406) F 0,38 (.015) 9,53 (.375) 7,93 (.312) 7,93 (.312) 7,93 (.312) 10,31 (.406) G 0,38 (.015) 19,05 (.750) 19,05 (.750) 25,40 (1.000) 25,40 (1.000) 28,57 (1.125) H max. 31,75 (1.250) 31,75 (1.250) 39,70 (1.563) 39,70 (1.563) 42,88 (1.688) Round Cable Clamp A C E 2X O 3,05 (.120) G F O D MAX CABLE ENTRY B 0,38 0,13 (.015 .005) 1 Kit consists of 1 shell, 2 screws, 2 hex nuts Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE44994 DA20961 DB20962 DC20963 DD20964 Mil Spec Part Number M85049/48-2-1 M85049/48-2-2 M85049/48-2-3 M85049/48-2-4 M85049/48-2-5 A 0,38 (.015) 30,68 (1.208) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) XD max. 10,31 (.406) 10,31 (.406) 15,06 (.593) 18,23 (.718) 20,62 (.812) E 0,38 (.015) 16,79 (.661) 24,99 (.984) 38,48 (1.515) 55,14 (2.171) 53,16 (2.093) F 0,38 (.015) 3,18 (.125) 3,18 (.125) 4,75 (.187) 6,35 (.250) 7,92 (.312) G 0,76 (.030) 26,18 (1.031) 26,18 (1.031) 26,98 (1.062) 26,98 (1.062) 26,98 (1.062) Dimensions are shown in mm (inch) Dimensions subject to change 203-K 203-C 203 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00204-8 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:25:45 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name csm no.: 100 D Subminiature Accessories Zoom: 100 Metal Backshell Short Straight Clamp 2X O 3,05 (.120) A C G 12,30 0,38 (.484 .015) B 0,38 0,13 (.015 .005) F 1 Kit consists of 1 shell, 2 or 3 screws, 2 or 3 hex nuts Shell Size DA DB DC DD Layout 15 25 37 50 Part Number DA19678-1 DB19678-2 DC19678-3 DD19678-4 Mil Spec Part Number M85049/48-3-2 M85049/48-3-3 M85049/48-3-4 M85049/48-3-5 E CABLE ENTRY No. of Cable Locking Screws Included 2 2 3 3 A 0,38 (.015) 38,88 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,38 (.015) 7,51 (.296) 7,51 (.296) 7,51 (.296) 9,91 (.390) F 0,38 (.015) 7,93 (.312) 20,22 (.796) 17,45 (.687) 17,45 (.687) G 0,89 (.035) 16,36 (.644) 16,36 (.644) 16,36 (.644) 17,63 (.694) DE-9 is not available. 90 Entry E CABLE ENTRY 2X MOUNTING HOLES #4-40 UNC-2B THD A B 2,77 0,25 (.109 .010) 1 Kit consists of 1 shell, 1 cable clamp, 1 screw, 1 nut, 2 rivnuts (assembled) F CABLE ENTRY G C H Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Mil Spec Part Number M85049/50-1 M85049/50-2 M85049/50-3 M85049/50-4 M85049/50-5 A 0,38 (.015) 30,56 (1.203) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,76 (.030) 18,24 (.718) 18,24 (.718) 24,58 (.968) 30,15 (1.187) 31,75 (1.250) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,76 (.030) 11,10 (.437) 11,10 (.437) 11,10 (.437) 11,10 (.437) 14,28 (.562) F 0,76 (.030) 11,10 (.437) 11,10 (.437) 15,88 (.625) 20,63 (.812) 23,01 (.906) G 0,76 (.030) 11,89 (.468) 11,89 (.468) 11,89 (.468) 11,89 (.468) 13,49 (.531) H 0,76 (.030) 7,14 (.281) 7,14 (.281) 7,14 (.281) 7,14 (.281) 8,71 (.343) Dimensions are shown in mm (inch) Dimensions subject to change 204 204-K Part Number DE19977-5 DA19977-1 DB19977-2 DC19977-3 DD19977-4 204-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00205-5 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:25:49 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name csm no.: 100 D Subminiature Accessories Zoom: 100 Plastic Backshell Plastic Backshell Snap-Together Universal O B MAX CABLE ENTRY 42,50 (1.673) 39,50 (1.555) C D 1 A 2-piece snap-together design for quick assembly 1 Customer furnishes tie-wrap Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE115339-20 DA115339-21 DB115339-22 DC115339-23 DD115339-24 XB max. 7,01 (.276) 9,60 (.378) 11,61 (.457) 13,00 (.512) 16,00 (.630) C 0,20 (.008) 17,00 (.669) 17,00 (.669) 17,00 (.669) 17,00 (.669) 19,81 (.780) D 0,20 (.008) 19,51 (.768) 27,79 (1.094) 41,61 (1.638) 57,99 (2.283) 52,32 (2.060) One-Piece Snap-Together A C 16,21 (.638) 48,00 (1.890) E CLAMP, THERMOPLASTIC CLAMP, METAL 1 1 1 1 Low cost Easy to assemble Mounting hardware included 2 thumbscrews, 2 cable clamps Materials and Finishes Backshell Material: Polypropylene Hardware Material: Steel Hardware Finish: Yellow chromate over zinc Shell Size DE DA DB Layout 9 15 25 Part Number DEBS-9 DABS-15 DBBS-25 O D MAX CABLE ENTRY A 35,20 (1.386) 43,31 (1.705) 57,20 (2.252) C 24,99 (.984) 33,33 (1.312) 47,04 (1.852) XD max. 5,69 (.224) 5,69 (.224) 6,50 (.256) E 27,51 (1.083) 31,19 (1.228) 38,30 (1.508) DC-37 and DD-50 are not available. Dimensions are shown in mm (inch) Dimensions subject to change 205-K 205-C 205 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00206-8 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:25:55 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name csm no.: 100 D Subminiature Accessories Zoom: 100 Plastic Backshell One-Piece Plastic Straight Exit G CABLE ENTRY B 1 Kit consists of 1 shell, 1 cable clamp, 1 set screw 1 Mounting hardware included 1 2 screws #4-24 x 5/16 long self-tapping 1 Accommodates spring latches Materials and Finishes Backshell Material: Hardware Material: Hardware Finish: Black Thermoplastic, UL 94V-2 rated Steel Yellow Chromate over Cadmium or Zinc C OE CABLE ENTRY A F CABLE ENTRY D Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51218 30,94 (1.218) 25,40 (1.000) DA 15 DA51210 39,27 (1.546) 25,40 (1.000) DB 25 DB51212 53,16 (2.093) 31,75 (1.250) DC 37 DC51214 69,44 (2.734) 38,10 (1.500) DD 50 DD51216 67,06 (2.640) 38,10 (1.500) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 90 Exit D XE 0,38 (.015) 0,25 (.010) 12,70 (.500) 7,14 (.281) 12,70 (.500) 9,14 (.360) 12,70 (.500) -- 12,70 (.500) -- 15,47 (.609) -- K CABLE ENTRY OH CABLE ENTRY A B 1 Kit consists of 1 shell, 1 cable clamp, 1 set screw 1 Mounting hardware included 1 2 screws #4-24 x 5/16 long self-tapping Materials and Finishes Backshell Material: Hardware Material: Hardware Finish: Black Thermoplastic, UL 94V-2 rated Steel Yellow Chromate over Cadmium or Zinc F G 0,25 (.010) 0,25 (.010) -- -- -- -- 12,52 (.493) 9,15 (.360) 17,63 (.694) 9,15 (.360) 18,64 (.734) 11,89 (.468) J CABLE ENTRY C D Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51219 37,95 (1.494) 25,40 (1.000) DA 15 DA51211 46,28 (1.822) 25,40 (1.000) DB 25 DB51213 60,15 (2.368) 31,75 (1.250) DC 37 DC51215 76,43 (3.009) 38,10 (1.500) DD 50 DD51217 74,04 (2.915) 38,10 (1.500) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D XH 0,38 (.015) 0,25 (.010) 12,70 (.500) 7,14 (.281) 12,70 (.500) 9,14 (.360) 12,70 (.500) -- 12,70 (.500) -- 15,47 (.609) -- J K 0,25 (.010) 0,25 (.010) -- -- -- -- 12,52 (.493) 9,15 (.360) 17,63 (.694) 9,15 (.360) 18,64 (.734) 11,89 (.468) Dataphone 56,34 - 55,55 (2.218 - 2.187) 20,22 - 19,43 (.796 - .765) 45,72 - 45,21 (1.800 - 1.780) 36,09 - 35,31 (1.421 - 1.390) 1 Available in 25 position only 1 Mounting hardware included 1 2 screws #4-40 x 11/16 long Materials and Finishes Backshell Material: Hardware Material: Hardware Finish: 3,81 - 3,56 (.150 - .140) Shell Size DB Layout 25 47,04(1.852) Part Number DB51226-1B # 4-40 THREADS Max. Cable Entry 7,92 (.312) Dimensions are shown in mm (inch) Dimensions subject to change 206 206-K Black Thermoplastic, UL 94V-0 rated Steel Clear Chromate over Cadmium or Zinc 11,18 - 10,41 (.440 - .410) 206-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00207-10 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:01 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature Accessories csm no.: 100 Zoom: 100 Plastic Backshell Quick Disconnect for IDC Cable IDC E CABLE ENTRY 2,60 0,20 (.102 .008) LOCKING SPRING* 40,54 (1.596) C 1 Kit consists of 1 front shell, 1 rear shell, 2 strain reliefs, 5 screws 16,31 (.642) LOCKING HOOK* A * Order optional locking hardware separately. Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Shell Size DE DA DB DC Part Number DE115386-1B DA115386-2B DB115386-3B DC115386-4B Layout 9 15 25 37 A max. 40,69 (1.602) 49,00 (1.929) 62,69 (2.468) 79,20 (3.118) C 0,13 (.005) 24,99 (.984) 33,30 (1.311) 47,04 (1.852) 63,50 (2.500) E 0,20 (.008) 14,99 (.590) 23,29 (.917) 36,98 (1.456) 53,49 (2.106) Quick Disconnect for Round Cable Straight and 90 Exit E CABLE ENTRY MIN 13,00 (.512) MAX LOCKING SPRING* B MAX 16,10 (.634) MAX 7,00 (.276) MAX C A MAX LOCKING HOOK* 1 Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 1 spacer, 4 self-tapping screws, 2 machined screws Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated F CABLE ENTRY MIN D MAX * Order optional locking hardware separately. Shell Part Size Layout Number DE 9 DE115339 DA 15 DA115339-1 DB 25 DB115339-2 DC 37 DC115339-3 DD 50 DD115339-4 A max. 41,33 (1.627) 49,63 (1.954) 63,65 (2.506) 79,86 (3.144) 77,57 (3.054) B max. 32,41 (1.276) 32,41 (1.276) 40,44 (1.592) 42,42 (1.670) 42,42 (1.670) C 0,15 (.006) 25,00 (.984) 33,30 (1.311) 47,04 (1.852) 63,50 (2.500) 61,10 (2.406) D max. 16,51 (.650) 16,51 (.650) 16,51 (.650) 16,51 (.650) 19,51 (.768) E min. 7,70 (.303) 7,70 (.303) 7,70 (.303) 7,70 (.303) 10,69 (.421) F min. 6,70 (.264) 6,70 (.264) 17,70 (.697) 17,70 (.697) 17,70 (.697) Optional Locking Hardware/Mechanism Optional hardware provides quick disconnect for either flat IDC cable or round jacketed cable. Locking Hook Locking Spring 1 Order 2 per connector Material: Corrosion-resistant steel Lock Hook Part Number 015-8755-000 015-8755-001 Lock Spring Part Number 259-8760-000 NOTE: Not for use on rear panel mounted connectors. Dimensions are shown in mm (inch) Dimensions subject to change 207-K 207-C 207 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00208-13 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:07 PM Operator: GT COLOR: BLACK TCP: 666 Typedriver Name: TS name csm no.: 100 D Subminiature Accessories Zoom: 100 Locking Hardware Screw Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon backshells. Front Panel Mount Rear Panel Mount D SUBMINIATURE CONNECTOR PIN OR SOCKET Product Features 1 Ensures positive mating 1 Provides locking and latching for high vibration applications SCREW CLIP WITH THD MOUNTING PANEL NUT WASHER D SUBMINIATURE CONNECTOR PIN OR SOCKET LOCK WASHER HEX NUT Male Screw Lock SCREW #4-40 UNC-2A THD A B C CLIP GAP 1 Kit consists of 1 screw and 1 clip 1 Order 2 per connector Material: Finish: Part Number D20419 D20419-18 D20419-21 D20419-104 D20420 D20420-13 D20420-15 D20420-86 A 0,38 (.015) 14,10 (.555) 14,10 (.555) 14,10 (.555) 14,10 (.555) 16,66 (.656) 16,66 (.656) 16,66 (.656) 16,66 (.656) B 0,25 (.010) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) C 0,13 (.005) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) Dimensions are shown in mm (inch) Dimensions subject to change 208 208-K Steel Yellow Chromate over Cadmium or Zinc Shell Size DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DD DD DD DD CLIP 208-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00209-12 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:10 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature Accessories Female Screw Lock csm no.: 100 Zoom: 100 Locking Hardware Front Panel Mount Rear Panel Mount 4,78 0,38 (.188 .015) HEX (ACROSS FLATS) 4,78 0,38 (.188 .015) 6,35 (.250) APPROX REMOVE ONE WASHER FOR EACH 0,76 (.030) OF PANEL THICKNESS WHEN REAR MOUNTING 1,52 (.060) MAX PANEL #4-40 UNC-2B THD A REAR FLANGE (REF) #4-40 UNC-2A THD 1 Kit consists of 1 nut, 3 washers, 1 lock washer, 1 hex nut 1 Order 2 per connector Material: Steel NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Yellow Chromate over Cadmium D20418-2 D20418-50 D20418-39 D20418-74 Mil Spec Part Number M24308/26-1 -- M24308/26-2 -- Zinc With Clear Chromate D20418-80 -- -- -- Female Screw Lock for High Volume Applications 3,80 (.150) MIN FULL THD 5,36 O (.211) Steel Zinc 1,70 (.067) 6,48 - 6,30 (.255 - .248) 7,82 0,13 (.308 .005) NOTE: Not suitable for rear panel mounting. Part Number 980-2000-858 980-2000-859 Screw Locks for Connectors with Integral Threaded Inserts 3,02 O (.119) 6,35 O (.119) NOM 1 Order 2 per connector 1 Tool required for installation. See page 211. Material: Finish: A 0,38 (.015) 7,92 (.312) 12,70 (.500) 15,88 (.625) 19,05 (.750) Thread Code #4-40 M3 Jackpost 3,50 (.138) MIN THD A 5,75 (.226) Part Number D121073-39 D121073-40 D121073-41 D121073-42 5,50 (.217) Nominal Panel Thickness 1,09 - 0,91 (.043 - .036) 1,09 - 0,91 (.043 - .036) 5,00 (.197) HEX (ACROSS FLATS) THD B 4,50 (.177) MIN Thread Code THD A #4-40 UNC-2B M3 #4-40 UNC-2B M3 THD B #4-40 UNC-2A #4-40 UNC-2A M3 M3 1 Kit consists of 1 jackpost, 1 lock washer 1 Order 2 per connector Material: Finish: Brass Nickel Dimensions are shown in mm (inch) Dimensions subject to change 209-K 209-C 209 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00210-15 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:16 PM Operator: GT COLOR: BLACK TCP: 666 D Subminiature Accessories Typedriver Name: TS name csm no.: 100 Zoom: 100 Locking Hardware Slide Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon backshells. #4-40 NUT, HEX Product Features 1 Ensures positive mating 1 Provides locking and latching for high vibration applications WASHER, LOCK PLATE, SLIDING LOCK MOUNTING SCREW #4-40 WASHER #4-40 POST WASHER, LOCK NUT, HEX Sliding Lock Retainer Assembly , , , 2,36 (.093) TRAVEL REF A C 1 Ideal for Ethernet Applications 1 Kit consists of 1 sliding lock plate, 2 mounting screws, 2 lock washers, 2 hex nuts 1 Order 1 kit per connector Finish/ Description Material Treatment Sliding Lock Plate Stainless Steel Passivated Screw, Yellow Mounting Steel Chromate Over Washer, Lock Cadmium or Zinc Nut, Hex Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE51224-1 DA51220-1* DB51221-1 DC51222-1 DD51223-1 A 0,38 (.015) 35,05 (1.380) 43,70 (1.720) 57,40 (2.260) 73,86 (2.908) 71,47 (2.814) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 25,00 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) * Meets IEEE 802.3 Ethernet Specification Dimensions are shown in mm (inch) Dimensions subject to change 210 210-K B 210-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00211-10 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:20 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature Accessories csm no.: 100 Zoom: 100 Locking Hardware Slide Lock Post Assemblies WASHER WASHER, LOCK POST 1 Kit consists of 1 post, 2 washers, 1 lock washer, 1 hex nut 1 Order 2 kits per connector Part Number: 4,60 (.180) HEX (ACROSS FLATS) D53018 2,59 0,13 (.102 .005) Materials and Finishes Material: Finish: #4-40 NUT, HEX 10,57 0,25 (.416 .010) Steel Yellow Chromate over Cadmium or Zinc NOTE: When rear-mounting connector to a 1/16N panel, delete the 2 washers. Slide Lock Post for High Volume Applications O 4,78 0,08 (.118 .003) O 3,63 0,08 (.143 .003) O 3,02(.119) MAX O 2,44 0,08 (.096 .003) 1 Order 2 per connector 1 Tool required for installation. See this page. Part Number: Panel Thickness: 980-2000-860 1,09-0,91 (.043-.036) O 5,54(.218) 1,85(.073) MAX 1,52 (.060) MAX 4,37 0,13 (.172 .005) Materials and Finishes Material: Treatment: Stainless Steel Passivated NOTE: Not suitable for rear panel mounting Tool for High Volume Applications Part Number: 995-2000-092 Dimensions are shown in mm (inch) Dimensions subject to change 211-K 211-C 211 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00212-13 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:25 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature Accessories csm no.: 100 Zoom: 100 Locking Hardware Spring Latch Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon Connectors. Unlocked Locked Product Features 1 Low Cost 1 Minimizes field connection time 1 Positive lock between connectors 1 Packaged 2 kits per bag Materials and Finishes Material: Treatment: Stainless Steel Passivated Spring Latch Plate Assembly #4-40 SCREW #4-40 THD x 7,92 (.312) SCREW 2,41 - 1,52 (.095 - .060) PLATE, LATCH PLATE, LATCH CONNECTOR, EITHER PIN OR SOCKET WASHER, LOCK #4-40 NUT, HEX Shell Size DE, DA, DB, DC DD Part Number D110278 D110280 Layout 9, 15, 25, 37 50 #4-40 NUT, HEX A 0,38 (.015) 12,42 (.489) 15,47 (.609) B 0,38 (.015) 14,35 (.565) 17,09 (.673) 1 Kit consists of 1 plate, 1 screw, 1 lock washer, 1 hex nut 1 Order 2 kits per connector Spring Latch Assembly LATCH, SPRING 15,57 0,64 (.613 .025) #4-40 SCREW LATCH, SPRING #4-40 THD x 7,92 (.312) SCREW B A C SPRING LATCH MOUNTING BRACKET *2,41 - 1,52 (.095 - .060) SPRING LATCH MOUNTING PLATE CONNECTOR, EITHER PIN OR SOCKET #4-40 NUT, HEX * Dimension does not apply to rear panel mounting. WASHER, LOCK #4-40 NUT, HEX Shell Size DE, DA, DB, DC DD Layout 9, 15, 25, 37 50 Part Number D110277 D110279 A 0,38 (.015) 12,42 (.489) 15,49 (.609) B 0,38 (.015) 14,35 (.565) 17,09 (.673) C 0,51 (.020) 18,59 (.732) 18,59 (.732) 1 Kit consists of 1 spring, 1 screw, 1 bracket, 1 lock washer, 1 hex nut 1 Order 2 kits per connector 1 Front panel mounting Dimensions are shown in mm (inch) Dimensions subject to change 212 212-K 212-C 2: 5: SYS06: BASE1 50: 95: JOB: IC931Z---P00213-11 98: 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:30 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name D Subminiature Accessories csm no.: 100 Zoom: 100 Locking Hardware Jackscrew/Jackpost Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon Connectors. Jackpost Assembly Jackscrew Assembly HEAD, JACKSCREW #2-56 UNC THD #4-40 UNC THD #4-40 UNC-2B THD RETAINING COMPOUND #4-40 UNC-2A THD WASHER, #4 LOCK O 3,05 (.120) #4 HEX NUT STUD, JACKSCREW FEMALE POST O 3,05 (.120) Jackscrew Assembly O 5,59 (.220) MAX 0,89 0,13 (.035 .005) CONNECTOR ASSEMBLY 1 Kit consists of 2 studs, 2 heads, 1 tube retaining compound 1 Order one kit per connector Part Number: 9,40 (.370) MAX 16,26 (.640) MAX D110550 Materials and Finishes Material: Stainless Steel 0,64 0,13 (.025 .005) #4-40 UNC THREAD O 5,59 (.220) MAX 1,73 (.068) MAX 4,57 (.180) MAX Jackpost Assembly 4,75 (.187) HEX (ACROSS FLATS) CONNECTOR ASSEMBLY 1 Kit consists of 2 posts, 2 hex nuts, 2 lock washers 1 Order one kit per connector Part Number: D110551 14,10 0,13 (.555 .005) 5,59 (.220) MIN PERFECT THD Materials and Finishes Material: Treatment: Stainless Steel Passivated #4-40 UNC THREAD 5,84 0,13 (.230 .005) 1,14 0,13 (.045 .005) PANEL 3,18 (.125) MAX #4-40 UNC THREAD NOTE: Jackpost is not compatible with rear-panel mount connectors. Dimensions are shown in mm (inch) Dimensions subject to change 213-K 213-C 213 2: 5: SYS06: BASE1 50: 95: 98: JOB: IC931Z---P00214-7 100: Name: D-SUBMINIATURE DATE: MAR 4 1998 Time: 2:26:35 PM Operator: BC COLOR: BLACK TCP: 666 Typedriver Name: TS name csm no.: 100 D Subminiature Accessories Zoom: 100 Guide Pin Plate Guide Pin Plate Female 9,60 (.378) MAX MOUNTING PANEL 1 Useful in blind mate applications. 1 Kit consists of 1 plate, 2 screws 1 Guide pin inserts for Size 8 cavities for Combo D connectors also available. See page 95. 1,57 (.062) 6,35 (.250) MAX SOLDER POT EXTENSION Plate and Hardware Material: Steel Plate and Hardware Finish: Yellow Chromate over Zinc or Cadmium Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 Part Number DE111920 DA22214 DB22254 DC22071 DD21961 A 0,41 (.016) 49,61 (1.953) 57,96 (2.282) 71,63 (2.820) 88,11 (3.469) 85,72 (3.375) B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,59 (3.094) 76,20 (3.000) C 0,13 (.005) 25,00 (.986) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) E 0,13 (.005) 15,27 (.601) 19,43 (.765) 26,29 (1.035) 34,52 (1.359) 33,32 (1.312) F 0,13 (.005) 9,52 (.375) 9,52 (.375) 9,52 (.375) 9,52 (.375) 11,10 (.437) G 0,41 (.016) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 28,58 (1.125) H 0,41 (.016) 30,58 (1.204) 38,91 (1.532) 51,21 (2.016) 67,49 (2.657) 65,10 (2.563) Recommended Panel Cutout K 0,41 (.016) 6,15 (.242) 6,15 (.242) 5,94 (.234) 5,94 (.234) 7,16 (.282) 2X O 4,22 0,05 (.166 .002) B 2X R K J 0,41 (.016) 12,29 (.484) 12,29 (.484) 11,91 (.469) 11,91 (.469) 14,30 (.563) E 2X O 3,66 0,13 (.144 .005) F F J D H Dimensions are shown in mm (inch) Dimensions subject to change 214 214-K 214-C