QPL Networks Vishay Foil Resistors Bulk Metal(R) Foil Technology 1445Q-14 Pin and 1446Q-16 Pin DIP Packages FEATURES * Hermetically Sealed for maximum environmental protection - 100% leak protection Product may not be to scale Gross Leak: No bubbles Fine Leak: < 5 x 10-7 cc/sec (MIL-STD-220, Method 112, Test C, Procedure 111A) * Tested per MIL-PRF-83401 THROUGH HOLE * Ceramic Package: 94% Alumina (Al2O3) Vishay Models 1445Q and 1446Q networks are qualified to MIL-PRF-83401, Characteristic C, Schematic A. Actual performance exceeds all the requirements of MIL-PRF-83401 characteristics "C." Model 1445Q contains 7 resistors and 1446Q contains 8 resistors. Qualified resistance range is 100 ohms through 10Kohms. Other values are available non-QPL. Power rating is 0.1 Watt. * Lid: Gold plated Kovar * Solder: Tin/Gold * Leads: Alloy 42 (Iron Nickel) with 100 Inches gold plating (MIL-STD-1276, Type G-21-A) * Gold ball wire bonding * Foil Chips V15X5 FIGURE 1 - MODEL 1445Q DIMENSIONS 0.740 0.045 (18.80 1.14) 0.008 -0.016 (0.20 -0.41) ADDITIONAL TESTING TO MIL SPEC Group A testing to MIL-PRF-83401 imposes the following: 0.270 +0.035/-0.030 (6.86 +0.89/-0.76) NO. 1 LEAD 0.300 0.010 (7.62 0.25) (VIEWED FROM TOP) 2. Power conditioning 100% 0.040 - 0.070 TYPICAL (1.01 - 1.78) 2. 1 100 hours at 25C, full power. 0.200 MAXIMUM (5.08) 0.135 +0.015/-0.010 (3.43 +0.38/-0.25) 0.100 TYP. (2.54) 3. 3 Damage due to the above tests. 4. 10% PDA or one piece whichever is greater. 0.008 -0.016 (0.20 -0.41) 0.300 0.010 (7.62 0 .25) NO. 1 LEAD 3. Visual and Mechanical after the above tests (sample plan) 3. 2 Workmanship FIGURE 2 - MODEL 1446Q DIMENSIONS 0.270 + 0.035 - 0.030 (6.86 + 0.89) - 0.76 2. 2 R and ratio calculation. 3. 1 Conformity to physical size. 0.015 -0.022 (0.38 -0.56) 0.830 + 0.046 - 0.070 (21.08 + 1.17) - 1.78 1. Thermal shock 100% 5X from - 65 to + 125C. (VIEWED FROM TOP) 5. Solderability (sample plan). Group B sample testing to MIL-PRF-83401 imposes the following: 1. Temperature Coefficient of Resistance (sample plan). 0.040 -0.070 TYPICAL (1.01 -1.78) 2. Resistance to solvents (sample plan). 0.200 (5.08) MAXIMUM 0.135 +0.015/ -0.010 (3.43 +0.38/-0.25) 0.100 (2.54) TYPICAL 0.015 -0.022 (0.38 -0.56) SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com www.vishay.com 116 For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63031 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 08-Mar-05 QPL Networks (R) Bulk Metal Foil Technology Vishay Foil Resistors 1445Q-14 Pin and 1446Q-16 Pin DIP Packages TABLE 1 - TCR CHARACTERISTIC TABLE 2 - RESISTANCE VALUE FIGURE 3 - SCHEMATIC "A" Qualification to Characteristic "C" allows Vishay to supply to the following characteristics* CHARACTCR TCR TERISTIC ABSOLUTE TRACK C V H K M 50 50 50 100 300 5 5 N.A. N.A. N.A. SEAL Hermetic Non-Hermetic Non-Hermetic Non-Hermetic Non-Hermetic N-1 N N-1 N A four digit designator in which the first three digits are significant figures and the fourth digit indicates the number of zeros to follow. 1 3 For Model: /01 /02 Example: 1002 = 10K *For characteristics H, K and M the "C" power rating must be acceptable. 2 N=7 N=8 MIL-PRF-83401 TEST OR CONDITION Y R C K M Resistance Temp Characteristic ppm/C 5 25 50 50 50 100 300 Tracking To Reference Element (- 55 to + 125C) ppm/C 5 5 5 5 NA NA NA Max Ambient Temp at Rated Wattage V H + 70C Max Ambient Temp at Zero Power + 125C Thermal Shock and Power Conditioning 0.02% 0.01% 0.08% 0.04% 0.25% 0.03% 0.25% 0.03% 0.50% NA 0.70% NA 0.70% NA Low Temperature Operation R Ratio 0.02% 0.02% 0.03% 0.02% 0.10% 0.02% 0.10% 0.02% 0.10% NA 0.25% NA 0.50% NA Short Time Overload R Ratio 0.02% 0.01% 0.03% 0.02% 0.10% 0.02% 0.10% 0.02% 0.10% NA 0.25% NA 0.50% NA Terminal Strength R Ratio 0.01% 0.01% 0.03% 0.02% 0.10% 0.03% 0.10% 0.03% 0.25% NA 0.25% NA 0.25% NA Resistance to Soldering Heat R Ratio 0.01% 0.01% 0.05% 0.02% 0.10% 0.02% 0.10% 0.02% 0.10% NA 0.25% NA 0.25% NA Moisture Resistance R Ratio 0.02% 0.01% 0.05% 0.02% 0.20% 0.02% 0.20% 0.02% 0.40% NA 0.50% NA 0.50% NA Shock (Specified Pulse) R Ratio 0.02% 0.02% 0.03% 0.02% 0.25% 0.03% 0.25% 0.03% 0.25% NA 0.25% NA 0.25% NA Vibration, High Frequency R Ratio 0.02% 0.02% 0.03% 0.02% 0.25% 0.03% 0.25% 0.03% 0.25% NA 0.25% NA 0.25% NA Load Life (+ 70C, Full Power, 1,000 Hours) R Ratio 0.05% 0.1% 0.025% 0.03% 0.10% 0.03% 0.10% 0.03% 0.50% NA 0.50% NA 2.00% NA + 25C Power Rating (1,000 hrs.) R Ratio 0.05% 0.1% 0.025% 0.03% 0.10% 0.03% 0.10% 0.03% 0.50% NA 0.50% NA 2.00% NA High Temperature Exposure (+ 125C, 100 Hours) R Ratio 0.02% 0.01% 0.05% 0.02% 0.10% 0.03% 0.10% 0.03% 0.20% NA 0.50% NA 1.00% NA Low Temperature Storage R Ratio 0.01% 0.01% 0.03% 0.02% 0.10% 0.02% 0.10% 0.02% 0.10% NA 0.25% NA 0.50% NA 0.1%(B) 0.5%(D) 1.0%(F) 0.5%(D) 1.0%(F) 2.0%(G) 1.0%(F) 2.0%(G) 5.0%(J) Insulation Resistance Resistance Tolerance and, when applicable, Resistance Ratio Accuracy 10,000M 0.005(V) 0.05(A) 0.01(T) 0.1(B) 0.05(A) 0.5(D) 0.1(B) 0.5(D) 1.0(F) 0.1%(B) 0.5%(D) 1.0%(F) 0.1%(B) 0.5%(D) 1.0%(F) 1. R's are not cumulative. For purposes of determining reliability calculations, consider the characteristics shown as figures of merit and allow no more than 0.05% R lifetime. Allow proportionately less if the severity of anticipated environmental stress is small compared to the tests as defined in MIL-PRF-83401. SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63031 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 08-Mar-05 www.vishay.com 117 THROUGH HOLE TABLE 3 - MIL-PRF-83401 PERFORMANCE SPECIFICATIONS QPL Networks Bulk Metal(R) Foil Technology 1445Q-14 Pin and 1446Q-16 Pin DIP Packages Vishay Foil Resistors TABLE 4 - ORDERING INFORMATION - VISHAY QUALIFIED M83401 SERIES (MIL-PRF-83401) NETWORKS M83401 01 C 1002 B A MILITARY SPECIFICATION SLASH SHEET TCR CHARACTERISTIC RESISTANCE VALUE RESISTANCE TOLERANCE SCHEMATIC** Vishay is qualified to Characteristic C (see Table 1) Vishay is qualified from 100 through 10K. (see Table 2) Vishay is qualified to the following tolerances: Vishay is qualified to schematic "A". (see Figure 3) MIL-PRF-83401 Vishay is qualified to the following slash sheets: /01 14pin DIP,Vishay P/N 1445Q THROUGH HOLE /02 16 pin DIP,Vishay P/N 1446Q B D F G J = = = = = * For standard values by tolerance see Table III of MIL-PRF-83401. All values are considered standard when the specified tolerance is tighter than 0.10%. ** What to do if QPL is required and no schematic is available: Schematic "X" - Additional special schematics may be identified as "X" schematic and described fully in the detailed specifications. DSCC Drawings - Anyone can request DSCC Drawings if the part is to be used on a military contract. Submit either a catalog sheet or SCD to DSCC or call Vishay for more information. *** Hot solder dip leads are available upon request 0.1% 0.5%* 1.0%* 2.0% 5.0% EXAMPLES: 14 Pin, 7 Resistor, 10K000, 0.1% Tolerance -- M83401 01 C 1002 B A MILITARY SPECIFICATION SLASH SHEET TCR CHARACTERISTIC RESISTANCE VALUE RESISTANCE TOLERANCE SCHEMATIC 16 Pin, 8 Resistor, 100R00, 0.1% Tolerance -- M83401 02 C 1000 F A MILITARY SPECIFICATION SLASH SHEET TCR CHARACTERISTIC RESISTANCE VALUE RESISTANCE TOLERANCE SCHEMATIC SALES * ISRAEL: foilsales.israel@vishay.com * FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com * AMERICAS: foilsales.usa@vishay.com * ASIA/JAPAN: foilsales.asia@vishay.com * UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com * GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com www.vishay.com 118 For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63031 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 08-Mar-05 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1