TL/F/9814
DM74LS573 Octal D Latch with TRI-STATE Outputs
June 1992
DM74LS573
Octal D Latch with TRI-STATEÉOutputs
General Description
The ’LS573 is a high speed octal latch with buffered com-
mon Latch Enable (LE) and buffered common Output En-
able (OE) inputs.
This device is functionally identical to the ’LS373, but has
different pinouts. For truth tables, discussion of operations
and AC and DC specifications, please refer to the ’LS373
data sheet.
Features
YInputs and outputs on opposite sides of package
allowing easy interface with microprocessors
YUseful as input or output port for microprocessors
YFunctionally identical to ’LS373
YInput clamp diodes limit high speed termination effects
YFully TTL and CMOS compatible
Connection Diagram
Dual-In-Line Package
TL/F/98141
Order Number DM74LS573WM or DM74LS573N
See NS Package Number M20B or N20A
Logic Symbol
TL/F/98142
VCC ePin 20
GND ePin 10
Pin Names Description
D0 D7 Data Inputs
LE Latch Enable Input (Active HIGH)
OE TRI-STATE Output Enable Input (Active LOW)
O0 O7 TRI-STATE Latch Outputs
Function Table
OUTPUT Latch DOutput
Enable Enable O
LHHH
LHLL
LLXQ
O
HXXZ
L
e
Low State, H eHigh State, X eDon’t Care
ZeHigh Impedance State
QOePrevious Condition of O
TRI-STATEÉis a registered trademark of National Semiconductor Corporation.
C1995 National Semiconductor Corporation RRD-B30M115/Printed in U. S. A.
Absolute Maximum Ratings (Note)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage 7V
Input Voltage 7V
Operating Free Air Temperature Range
DM74LS 0§Ctoa
70§C
Storage Temperature Range b65§Ctoa
150§C
Note:
The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaran-
teed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
Recommended Operating Conditions
Symbol Parameter DM74LS Units
Min Nom Max
VCC Supply Voltage 4.75 5 5.25 V
VIH High Level Input Voltage 2 V
VIL Low Level Input Voltage 0.8 V
IOH High Level Input Current b2.6 mA
IOL Low Level Output Current 24 mA
TAFree Air Operating Temperature 0 70 §C
Electrical Characteristics
Over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min Typ Max Units
(Note 1)
VIInput Clamp Voltage VCC eMin, IIeb
18 mA b1.5 V
VOH High Level Output VCC eMin, IOH eMax, 2.7 3.4 V
Voltage VIL eMax
VOL Low Level Output VCC eMin, IOL eMax, 0.35 0.5
Voltage VIH eMin V
IOL e4 mA, VCC eMin 0.25 0.4
IIInput Current @Max VCC eMax, VIe7V 1mA
Input Voltage
IIH High Level Input Current VCC eMax, VIe2.7V 20 mA
IIL Low Level Input Current VCC eMax, VIe0.4V b0.4 mA
IOS Short Circuit VCC eMax b30 b130 mA
Output Current (Note 2)
ICC Supply Current VCC eMax 50 mA
IOZH TRI-STATE Output VCC eVCCH 20 mA
off Current High VOZH e2.7V
IOZL TRI-STATE Output VCC eVCCH b20 mA
off Current Low VOZL e0.4V
Note 1: All typicals are at VCC e5V, TAe25§C.
Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second.
2
Switching Characteristics
at VCC e5V and TAe25§C (see Section 1 for Test Waveforms and output loading)
RLe2kX,
Symbol Parameter CLe50 pF Units
Min Max
tPLH Propagation Delay 27 ns
tPHL Data to Q 18
tPLH Propagation Delay 36 ns
tPHL LE to Q 25
tPZH TRI-STATE Enable Time 20 ns
tPZL OE to Q 25
tPHZ TRI-STATE Enable Time 20 ns
tPLZ OE to Q 25
ts(H) Setup Time (High/Low) 3 ns
ts(L) Data to LE 7
th(H) Hold Time (High/Low) 10 ns
th(L) Data to LE 10
tw(H) Pulse Width (High) 15 ns
Data to LE
Physical Dimensions inches (millimeters)
20-Lead Wide Small Outline Molded Package (M)
Order Number DM74LS573WM
NS Package Number M20B
3
DM74LS573 Octal D Latch with TRI-STATE Outputs
Physical Dimensions inches (millimeters) (Continued)
20-Lead Molded Dual-In-Line Package (N)
Order Number DM74LS573N
NS Package Number N20A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (
a
49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge
@
tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (
a
49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (
a
49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (
a
49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (
a
49) 0-180-534 16 80 Fax: (852) 2736-9960
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.