3.5 x2.8mm SMD CHIP LED LAMP Part Number: APETD3528SYC/J3-PRV Super Bright Yellow Features Description z Single color. The Super Bright Yellow device is based on light emitting z Suitable for all SMT assembly and solder process. diode chip made from AlGaInP. z Available on tape and reel. z Package: 500pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK7116 REV NO: V.3 DATE: MAY/18/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203009659 Selection Guide Part No. Dice APETD3528SYC/J3-PRV Iv (mcd) [2] @ 20mA Lens Type Super Bright Yellow (AlGaInP) Viewing Angle [1] Min. Typ. 21/2 700 1500 60 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 589 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 50 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK7116 REV NO: V.3 DATE: MAY/18/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203009659 Super Bright Yellow APETD3528SYC/J3-PRV SPEC NO: DSAK7116 REV NO: V.3 DATE: MAY/18/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203009659 APETD3528SYC/J3-PRV Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK7116 REV NO: V.3 DATE: MAY/18/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203009659 PACKING & LABEL SPECIFICATIONS APETD3528SYC/J3-PRV SPEC NO: DSAK7116 REV NO: V.3 DATE: MAY/18/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203009659 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: APETD3528SYC/J3-PRV