ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON TRANSISTOR ARRAYS Check for Samples: ULN2002A, ULN2003A, ULN2003AI, ULN2004A, ULQ2003A, ULQ2004A FEATURES 1 * * * * * 500-mA-Rated Collector Current (Single Output) High-Voltage Outputs: 50 V Output Clamp Diodes Inputs Compatible With Various Types of Logic Relay-Driver Applications ULN2002A . . . N PACKAGE ULN2003A . . . D, N, NS, OR PW PACKAGE ULN2004A . . . D, N, OR NS PACKAGE ULQ2003A, ULQ2004A . . . D OR N PACKAGE (TOP VIEW) 1B 2B 3B 4B 5B 6B 7B E 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 1C 2C 3C 4C 5C 6C 7C COM DESCRIPTION The ULN2002A, ULN2003A, ULN2003AI, ULN2004A, ULQ2003A, and ULQ2004A are high-voltage high-current Darlington transistor arrays. Each consists of seven npn Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of a single Darlington pair is 500 mA. The Darlington pairs can be paralleled for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers. For 100-V (otherwise interchangeable) versions of the ULN2003A and ULN2004A, see the SN75468 and SN75469, respectively. The ULN2002A is designed specifically for use with 14-V to 25-V PMOS devices. Each input of this device has a Zener diode and resistor in series to control the input current to a safe limit. The ULN2003A and ULQ2003A have a 2.7-k series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices. The ULN2004A and ULQ2004A have a 10.5-k series base resistor to allow operation directly from CMOS devices that use supply voltages of 6 V to 15 V. The required input current of the ULN/ULQ2004A is below that of the ULN/ULQ2003A, and the required voltage is less than that required by the ULN2002A. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1976-2012, Texas Instruments Incorporated ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 www.ti.com ORDERING INFORMATION (1) PACKAGE (2) TA PDIP - N -20C to 70C SOIC - D SOP - NS TSSOP - PW PDIP - N -40C to 85C -40C to 105C (2) Tube of 25 ULN2002AN ULN2002AN ULN2003AN ULN2003AN ULN2004AN ULN2004AN Tube of 40 ULN2003AD Reel of 2500 ULN2003ADR Reel of 2500 ULN2003ADRG3 Tube of 40 ULN2004AD Reel of 2500 ULN2004ADRG3 Reel of 2000 ULN2003A ULN2004A ULN2003ANSR ULN2003A ULN2004ANSR ULN2004A Tube of 90 ULN2003APW Reel of 2000 ULN2003APWR Tube of 25 TOP-SIDE MARKING UN2003A ULQ2003AN ULQ2003A ULQ2004AN ULQ2004AN Tube of 40 ULQ2003AD Reel of 2500 ULQ2003ADR Tube of 40 ULQ2004AD Reel of 2500 ULQ2004ADR SOP - NS Reel of 2000 ULN2003AINSR ULN2003AI PDIP - N Tube of 425 ULN2003AIN ULN2003AIN Tube of 40 ULN2003AID Reel of 2500 ULN2003AIDR Reel of 2500 ULN2003AIPWR SOIC - D SOIC - D TSSOP - PW (1) ORDERABLE PART NUMBER ULQ2003A ULQ2004A ULN2003AI UN2003AI For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. LOGIC DIAGRAM 9 COM 1 16 1C 1B 2 15 2C 2B 3 14 3C 3B 4 13 4C 4B 5 12 5C 5B 6 11 6C 6B 7 7B 2 Submit Documentation Feedback 10 7C Copyright (c) 1976-2012, Texas Instruments Incorporated Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 SCHEMATICS (EACH DARLINGTON PAIR) 10.5 kW 7.2 kW 3 kW ULN2002A RB ULN/ULQ2003A: RB = 2.7 kW ULN2003AI: RB = 2.7 kW 7.2 kW 3 kW ULN/ULQ2004A: RB = 10.5 kW ULN2003A, ULN2003AI, ULN2004A, ULQ2003A, ULQ2004A All resistor values shown are nominal. The collector-emitter diode is a parasitic structure and should not be used to conduct current. If the collector(s) go below ground an external Schottky diode should be added to clamp negative undershoots. Copyright (c) 1976-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A 3 ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) at 25C free-air temperature (unless otherwise noted) MIN VCC VI TA 50 V Clamp diode reverse voltage (2) 50 V Input voltage (2) 30 V 500 mA Output clamp current 500 mA Total emitter-terminal current -2.5 A See Figure 14 and Figure 15 Operating free-air temperature range Package thermal impedance (3) JA UNIT Collector-emitter voltage Peak collector current IOK MAX (4) -20 70 ULN200xAI -40 105 ULQ200xA -40 85 ULQ200xAT -40 105 D package 73 N package 67 NS package 64 PW package 108 D package 36 N package 54 C C/W JC Package thermal impedance (5) TJ Operating virtual junction temperature 150 C Lead temperature for 1.6 mm (1/16 inch) from case for 10 seconds 260 C 150 C Tstg (1) (2) (3) (4) (5) (6) (6) ULN200xA Storage temperature range -65 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values are with respect to the emitter/substrate terminal E, unless otherwise noted. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Maximum power dissipation is a function of TJ(max), JC, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JC. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with MIL-STD-883. ELECTRICAL CHARACTERISTICS TA = 25C PARAMETER VI(on) On-state input voltage TEST FIGURE Figure 6 TEST CONDITIONS ULN2002A MIN TYP MAX VCE = 2 V, IC = 300 mA II = 250 A, IC = 100 mA 0.9 1.1 13 II = 350 A, IC = 200 mA 1 1.3 II = 500 A, IC = 350 mA 1.2 1.6 VCE(sat) Collector-emitter saturation voltage Figure 4 VF Clamp forward voltage Figure 7 IF = 350 mA Figure 1 VCE = 50 V, II = 0 50 Figure 2 VCE = 50 V, TA = 70C II = 0 100 VI = 6 V 500 IC = 500 A ICEX Collector cutoff current II(off) Off-state input current Figure 2 VCE = 50 V, II Input current Figure 3 VI = 17 V IR Clamp reverse current Ci Input capacitance 4 Submit Documentation Feedback Figure 6 VR = 50 V VI = 0, 1.7 50 1.25 100 50 f = 1 MHz V V V A A 65 0.82 TA = 70C 2 UNIT 25 mA A pF Copyright (c) 1976-2012, Texas Instruments Incorporated Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 ELECTRICAL CHARACTERISTICS TA = 25C PARAMETER TEST FIGURE TEST CONDITIONS ULN2003A MIN TYP ULN2004A MAX MIN TYP IC = 125 mA VI(on) On-state input voltage Figure 6 VCE = 2 V 2.4 IC = 250 mA 2.7 6 IC = 275 mA 7 ICEX Collector cutoff current 8 II = 250 A, IC = 100 mA 0.9 1.1 0.9 1.1 II = 350 A, IC = 200 mA 1 1.3 1 1.3 II = 500 A, IC = 350 mA 1.2 1.6 1.2 1.6 Figure 1 VCE = 50 V, II = 0 50 50 Figure 2 VCE = 50 V, TA = 70C II = 0 100 100 Figure 5 VF Clamp forward voltage Figure 8 IF = 350 mA II(off) Off-state input current Figure 3 VCE = 50 V, TA = 70C, VI = 6 V 50 VI = 3.85 V II Input current Figure 4 2 65 1.7 50 0.93 Clamp reverse current Ci Input capacitance Figure 7 VI = 5 V VR = 50 V VI = 0, A TA = 70C f = 1 MHz 2 V A 65 1.35 VI = 12 V IR V 500 1.7 IC = 500 A V 3 IC = 350 mA Collector-emitter saturation voltage UNIT 5 IC = 200 mA IC = 300 mA VCE(sat) MAX 15 0.35 0.5 1 1.45 50 50 100 100 25 15 25 mA A pF ELECTRICAL CHARACTERISTICS TA = 25C PARAMETER VI(on) On-state input voltage TEST FIGURE Figure 6 ULN2003AI TEST CONDITIONS VCE = 2 V MIN TYP IC = 200 mA 2.4 IC = 250 mA 2.7 IC = 300 mA VCE(sat) Collector-emitter saturation voltage Figure 5 II = 250 A, IC = 100 mA II = 350 A, II = 500 A, II = 0 ICEX Collector cutoff current Figure 1 VCE = 50 V, VF Clamp forward voltage Figure 8 IF = 350 mA II(off) Off-state input current Figure 3 VCE = 50 V, II Input current Figure 4 VI = 3.85 V IR Clamp reverse current Figure 7 VR = 50 V Ci Input capacitance Copyright (c) 1976-2012, Texas Instruments Incorporated VI = 0, MAX V 3 0.9 1.1 IC = 200 mA 1 1.3 IC = 350 mA 1.2 1.6 50 1.7 IC = 500 A UNIT 50 15 V 1.35 mA 50 A 25 pF Submit Documentation Feedback Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A A A 65 0.93 f = 1 MHz 2 V 5 ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 www.ti.com ELECTRICAL CHARACTERISTICS TA = -40C to 105C PARAMETER VI(on) VCE(sat) TEST FIGURE On-state input voltage Figure 6 Collector-emitter saturation voltage VCE = 2 V Figure 5 ULN2003AI TEST CONDITIONS MIN TYP MAX IC = 200 mA 2.7 IC = 250 mA 2.9 IC = 300 mA 3 II = 250 A, IC = 100 mA 0.9 1.2 II = 350 A, IC = 200 mA 1 1.4 II = 500 A, IC = 350 mA 1.2 1.7 II = 0 ICEX Collector cutoff current Figure 1 VCE = 50 V, VF Clamp forward voltage Figure 8 IF = 350 mA II(off) Off-state input current Figure 3 VCE = 50 V, II Input current Figure 4 VI = 3.85 V IR Clamp reverse current Figure 7 VR = 50 V Ci Input capacitance 100 1.7 IC = 500 A 30 f = 1 MHz 15 V V A V A 65 0.93 VI = 0, 2.2 UNIT 1.35 mA 100 A 25 pF ELECTRICAL CHARACTERISTICS over recommended operating conditions (unless otherwise noted) PARAMETER TEST FIGURE TEST CONDITIONS ULQ2003A MIN TYP ULQ2004A MAX MIN TYP IC = 125 mA VI(on) On-state input voltage Figure 6 VCE = 2 V IC = 200 mA 2.7 IC = 250 mA 2.9 6 IC = 275 mA 7 ICEX Collector cutoff current VF Clamp forward voltage Figure 5 IC = 100 mA 0.9 1.2 0.9 1.1 II = 350 A, IC = 200 mA 1 1.4 1 1.3 1.2 1.7 1.2 1.6 II = 500 A, IC = 350 mA VCE = 50 V, II = 0 Figure 2 VCE = 50 V, TA = 70C II = 0 Figure 8 IF = 350 mA VCE = 50 V, TA = 70C, II(off) Off-state input current Figure 3 II Input current Figure 4 8 II = 250 A, Figure 1 100 2.3 65 0.93 1.7 50 Clamp reverse current Ci Input capacitance 6 Figure 7 Submit Documentation Feedback VR = 50 V VI = 0, TA = 25C f = 1 MHz 15 2 V A 65 1.35 VI = 5 V VI = 12 V IR A 500 1.7 VI = 3.85 V V 50 100 VI = 6 V IC = 500 A V 3 IC = 350 mA Collector-emitter saturation voltage UNIT 5 IC = 300 mA VCE(sat) MAX 0.35 0.5 1 1.45 100 50 100 100 25 15 25 mA A pF Copyright (c) 1976-2012, Texas Instruments Incorporated Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 SWITCHING CHARACTERISTICS TA = 25C PARAMETER ULN2002A, ULN2003A, ULN2004A TEST CONDITIONS MIN TYP MAX UNIT tPLH Propagation delay time, low- to high-level output See Figure 9 0.25 1 s tPHL Propagation delay time, high- to low-level output See Figure 9 0.25 1 s VOH High-level output voltage after switching VS = 50 V, IO = 300 mA, See Figure 10 VS - 20 mV SWITCHING CHARACTERISTICS TA = 25C PARAMETER ULN2003AI TEST CONDITIONS MIN tPLH Propagation delay time, low- to high-level output See Figure 9 tPHL Propagation delay time, high- to low-level output See Figure 9 VOH High-level output voltage after switching VS = 50 V, IO 300 mA, See Figure 10 TYP MAX 0.25 1 0.25 1 VS - 20 UNIT s s mV SWITCHING CHARACTERISTICS TA = -40C to 105C PARAMETER ULN2003AI TEST CONDITIONS MIN TYP MAX tPLH Propagation delay time, low- to high-level output See Figure 9 1 10 tPHL Propagation delay time, high- to low-level output See Figure 9 1 10 VOH High-level output voltage after switching VS = 50 V, IO 300 mA, See Figure 10 VS - 50 UNIT s s mV SWITCHING CHARACTERISTICS over recommended operating conditions (unless otherwise noted) PARAMETER ULQ2003A, ULQ2004A TEST CONDITIONS MIN TYP MAX UNIT tPLH Propagation delay time, low- to high-level output See Figure 9 1 10 s tPHL Propagation delay time, high- to low-level output See Figure 9 1 10 s VOH High-level output voltage after switching VS = 50 V, IO = 300 mA, See Figure 10 Copyright (c) 1976-2012, Texas Instruments Incorporated VS - 20 Submit Documentation Feedback Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A mV 7 ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION Open Open VCE VCE ICEX ICEX VI Open Figure 1. ICEX Test Circuit Open Figure 2. ICEX Test Circuit Open VCE II(off) II(on) IC Open VI Figure 3. II(off) Test Circuit A. Figure 4. II Test Circuit II is fixed for measuring VCE(sat), variable for measuring hFE. Open Open hFE = IC II VCE II Figure 5. hFE, VCE(sat) Test Circuit VI(on) IC VCE IC Figure 6. VI(on) Test Circuit VR IR VF IF Open Open Figure 7. IR Test Circuit Figure 8. VF Test Circuit Figure 9. Propagation Delay-Time Waveforms 8 Submit Documentation Feedback Copyright (c) 1976-2012, Texas Instruments Incorporated Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 PARAMETER MEASUREMENT INFORMATION (continued) 200 W 10 ns 5 ns 90% 1.5 V Input VIH (see Note C) 90% 1.5 V 10% 10% 0V 40 s VOH Output VOL VOLTAGE WAVEFORMS A. The pulse generator has the following characteristics: PRR = 12.5 kHz, ZO = 50 . B. CL includes probe and jig capacitance. C. For testing the ULN2003A, ULN2003AI, and ULQ2003A, VIH = 3 V; for the ULN2002A, VIH = 13 V; for the ULN2004A and the ULQ2004A, VIH = 8 V. Figure 10. Latch-Up Test Circuit and Voltage Waveforms Copyright (c) 1976-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A 9 ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 www.ti.com TYPICAL CHARACTERISTICS COLLECTOR-EMITTER SATURATION VOLTAGE vs TOTAL COLLECTOR CURRENT (TWO DARLINGTONS IN PARALLEL) VCE(sat) VCE(sat) - Collector-Emitter Saturation Voltage - V 2.5 TA = 25C 2 II = 250 A II = 350 A II = 500 A 1.5 1 0.5 0 0 100 200 300 400 500 600 700 800 VCE(sat) VCE(sat) - Collector-Emitter Saturation Voltage - V COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT (ONE DARLINGTON) 2.5 TA = 25C II = 350 A 1.5 II = 500 A 1 0.5 0 0 100 300 400 500 600 700 Figure 11. Figure 12. COLLECTOR CURRENT vs INPUT CURRENT D PACKAGE MAXIMUM COLLECTOR CURRENT vs DUTY CYCLE 800 600 500 IIC C - Maximum Collector Current - mA RL = 10 TA = 25C 450 IC IC - Collector Current - mA 200 IC(tot) - Total Collector Current - mA IC - Collector Current - mA 400 VS = 10 V 350 VS = 8 V 300 250 200 150 100 50 0 500 N=1 400 N=4 N=3 300 N=2 N=6 200 N = 7 N=5 100 TA = 70C N = Number of Outputs Conducting Simultaneously 0 0 25 50 75 100 125 II - Input Current - A Figure 13. 10 II = 250 A 2 Submit Documentation Feedback 150 175 200 0 10 20 30 40 50 60 70 80 90 100 Duty Cycle - % Figure 14. Copyright (c) 1976-2012, Texas Instruments Incorporated Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 TYPICAL CHARACTERISTICS (continued) N PACKAGE MAXIMUM COLLECTOR CURRENT vs DUTY CYCLE MAXIMUM AND TYPICAL INPUT CURRENT vs INPUT VOLTAGE 600 2000 TJ = -40C to 105C 500 1600 N=1 N=3 N=2 400 N=4 300 N=5 N=6 N=7 Input Current - A IIC C - Maximum Collector Current - mA 1800 200 1400 1200 1000 Maximum 800 600 400 100 0 Typical TA = 85C N = Number of Outputs Conducting Simultaneously 0 10 20 30 40 50 60 70 200 0 80 2 90 100 2.5 3 3.5 4 Input Voltage - V 4.5 5 Duty Cycle - % Figure 15. Figure 16. MAXIMUM AND TYPICAL SATURATED VCE vs OUTPUT CURRENT MINIMUM OUTPUT CURRENT vs INPUT CURRENT 500 2.1 V CE = 2 V TJ = -40C to 105C TJ = -40C to 105C 450 400 Output Current - mA Maximum VCE(sat) Voltage - V 1.9 1.7 1.5 Maximum 1.3 350 300 250 Minimum 200 1.1 150 Typical 0.9 100 200 300 400 500 100 250 350 450 Output Current - mA Input Current - A Figure 17. Figure 18. Copyright (c) 1976-2012, Texas Instruments Incorporated 550 650 Submit Documentation Feedback Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A 11 ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 www.ti.com APPLICATION INFORMATION ULN2002A VSS P-MOS Output V ULQ2003A VCC 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 V 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 Lam Test TTL Output Figure 19. P-MOS to Load ULN2004A ULQ2004A VDD Figure 20. TTL to Load VCC V V ULQ2003A 1 16 1 16 2 15 2 15 3 14 3 14 4 13 4 13 5 12 5 12 6 11 6 11 7 10 7 10 8 9 8 9 RP CMOS Output TTL Output Figure 21. Buffer for Higher Current Loads 12 Submit Documentation Feedback Figure 22. Use of Pullup Resistors to Increase Drive Current Copyright (c) 1976-2012, Texas Instruments Incorporated Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A ULN2002A, ULN2003A, ULN2003AI, ULN2004A ULQ2003A, ULQ2004A www.ti.com SLRS027L - DECEMBER 1976 - REVISED MARCH 2012 REVISION HISTORY Changes from Revision K (August 2011) to Revision L * Page Removed reference to obsolete ULN2001 part .................................................................................................................... 1 Copyright (c) 1976-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ULN2002A ULN2003A ULN2003AI ULN2004A ULQ2003A ULQ2004A 13 PACKAGE OPTION ADDENDUM www.ti.com 25-Apr-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp OBSOLETE SOIC D 16 TBD Call TI Call TI ULN2001ADR OBSOLETE SOIC D 16 TBD Call TI Call TI ULN2001AN OBSOLETE PDIP N 16 TBD Call TI Call TI ULN2002AD OBSOLETE SOIC D 16 TBD Call TI Call TI ULN2002AN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ULN2002ANE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ULN2003AD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ADE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ADG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ADR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ADRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ADRG3 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) ULN2003ADRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIN ACTIVE PDIP N 16 25 Pb-Free (RoHS) Addendum-Page 1 Samples (Requires Login) ULN2001AD CU SN (3) Level-1-260C-UNLIM CU NIPDAU N / A for Pkg Type PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Apr-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ULN2003AINSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIPWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003AIPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) ULN2003AJ OBSOLETE CDIP J 16 ULN2003AN ACTIVE PDIP N 16 25 ULN2003ANE3 PREVIEW PDIP N 16 25 TBD ULN2003ANE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) ULN2003ANSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ANSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003ANSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003APW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003APWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003APWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003APWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2003APWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 2 Call TI Call TI CU NIPDAU N / A for Pkg Type Call TI Samples (Requires Login) ULN2003AINE4 TBD (3) Call TI CU NIPDAU N / A for Pkg Type PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Apr-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ULN2003APWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004AD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004ADE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004ADG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004ADR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004ADRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004ADRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004AN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ULN2004ANE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ULN2004ANSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULN2004ANSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2003AD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2003ADG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2003ADR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2003ADRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2003AN ACTIVE PDIP N 16 25 Pb-Free (RoHS) ULQ2004AD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2004ADG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ULQ2004ADR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 3 CU NIPDAU N / A for Pkg Type (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Apr-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) ULQ2004ADRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) ULQ2004AN ACTIVE PDIP N 16 25 Pb-Free (RoHS) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM CU NIPDAU N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF ULQ2003A, ULQ2004A : * Automotive: ULQ2003A-Q1, ULQ2004A-Q1 NOTE: Qualified Version Definitions: * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant ULN2003ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2003ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2003AIDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2003AINSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 ULN2003AIPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 ULN2003AIPWR TSSOP PW 16 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 ULN2003AIPWRG4 TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 ULN2003ANSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 ULN2003APWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 ULN2003APWR TSSOP PW 16 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 ULN2003APWRG4 TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 ULN2004ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2004ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2004ADRG4 SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2004ADRG4 SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 ULN2004ANSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 ULQ2003ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) ULN2003ADR SOIC D 16 2500 367.0 367.0 38.0 ULN2003ADR SOIC D 16 2500 333.2 345.9 28.6 ULN2003AIDR SOIC D 16 2500 333.2 345.9 28.6 ULN2003AINSR SO NS 16 2000 367.0 367.0 38.0 ULN2003AIPWR TSSOP PW 16 2000 367.0 367.0 35.0 ULN2003AIPWR TSSOP PW 16 2000 364.0 364.0 27.0 ULN2003AIPWRG4 TSSOP PW 16 2000 367.0 367.0 35.0 ULN2003ANSR SO NS 16 2000 367.0 367.0 38.0 ULN2003APWR TSSOP PW 16 2000 367.0 367.0 35.0 ULN2003APWR TSSOP PW 16 2000 364.0 364.0 27.0 ULN2003APWRG4 TSSOP PW 16 2000 367.0 367.0 35.0 ULN2004ADR SOIC D 16 2500 367.0 367.0 38.0 ULN2004ADR SOIC D 16 2500 333.2 345.9 28.6 ULN2004ADRG4 SOIC D 16 2500 333.2 345.9 28.6 ULN2004ADRG4 SOIC D 16 2500 367.0 367.0 38.0 ULN2004ANSR SO NS 16 2000 367.0 367.0 38.0 ULQ2003ADR SOIC D 16 2500 333.2 345.9 28.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated