PME271Y * EMI suppressor, class Y2, metallized paper * 0.001 - 0.15 F, 250 VAC up to +100, 300 VAC up to +115 C * The highest possible safety regarding active and passive flammability. * Self-extinguishing UL 94V-0 encapsulation material. * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. * Good resistance to ionisation due to impregnated dielectric. * High dU/dt capability. * Small dimensions. * Safety approvals for worldwide use. * The capacitors meet the most stringent IEC humidity class, 56 days. * The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. CONSTRUCTION The capacitors are intended for use as interference suppressors in Y2 (line-to-earth) applications. Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. p 0.5 d l TECHNICAL DATA PME271Y PME271YA-E Rated voltage VAC, 50/60Hz 250 300 Capacitance range F 0.001-0.1 0.001-0.15 Temperature range C -40/+100 -40/+115 Climatic category IEC 40/100/56/B 40/115/56/B Capacitance tolerance 10% for C > 0.1 F, code K. 20% for C 0.1 F, code M Approvals S, N, D, FI, VDE, SEV, IMQ, UL, CSA d = 0.6 for p = 10.2 0.8 for p = 15.2, 20.3, 22.5 1.0 for p = 25.4 l = standard 30 +5/-0 mm (code R30) option short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request. dB Attenuation 70 0.47 F 60 Dissipation factor tan 1.3 % at 1 kHz Insulation resistance C 0.33 F 12000 M Measured at 500 VDC after 60 s, +23C 0.047 F 50 In DC applications Recommended voltage: 1000 VDC Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead lengths. B H L TYPICAL APPLICATIONS 0.0047 F 40 30 20 10 f Test voltage between terminals 0 1 3 5 10 30 100 200 MHz Suppression versus frequency. Typical values. The 100% screening factory test is carried out at 3000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each, 10 - 500 Hz at 0.75 mm or 98 m/s2 No visible damage, No open or short circuit Bump IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2 No visible damage, No open or short circuit Solderability IEC 60068-2-20, Test Ta Solder globule method Wetting time Active flammability EN 132400 for d 0.8 < 1 s for d > 0.8 < 1.5 s Passive flammability IEC 60384-14 (1993), EN 132400 Humidity IEC 60068-2-3, Test Ca +40C and 90 - 95% R.H. 56 days 165 PME271Y ARTICLE TABLE p Quantity per package reel R30 R06 taped Weight pcs pcs pcs g Approvals fO MHz Max dU/dt V/s S N D FI VDE SEV IMQ UL CSA Capaci- Max dimensions tance in mm F B H L Article code CLASS Y2 250 VAC +100 C PME271 Y 0.0010 0.0015 0.0022 0.0033 0.0047 3.9 3.9 3.9 4.1 5.1 7.5 7.5 7.5 8.2 10.5 13.5 13.5 13.5 13.5 13.5 10.2 10.2 10.2 10.2 10.2 1000 1000 1000 1000 800 2000 2000 2000 2000 1600 700 700 700 600 600 0.7 0.7 0.7 0.9 1.2 53 44 37 30 24 2000 2000 2000 2000 2000 PME271Y410MR30 PME271Y415MR30 PME271Y422MR30 PME271Y433MR30 PME271Y447MR30 0.0068 0.010 0.015 0.022 5.2 5.2 5.5 7.3 10.5 10.5 11.0 13.0 18.5 18.5 18.5 19.0 15.2 15.2 15.2 15.2 500 500 500 400 1000 1000 1000 800 600 600 500 400 1.7 1.7 2.0 3.0 19 16 13 9.8 1400 1400 1400 1400 PME271Y468MR30 PME271Y510MR30 PME271Y515MR30 PME271Y522MR30 0.033 0.047 0.068 7.6 9.0 11.3 14.0 15.0 16.5 24.0 20.3 24.0 20.3 24.0 20.3 250 200 150 1500 1200 1000 250 250 180 4.0 5.0 7.0 7.0 6.0 4.6 1000 1000 600 PME271Y533MR30 PME271Y547MR30 PME271Y568MR30 0.10 12.1 19.0 30.5 25.4 100 800 10.0 3.9 400 PME271Y610MR30 CLASS Y2 300 VAC + 115 C PME271 Y 0.0010 0.0015 0.0022 0.0025 0.0033 0.0047 3.9 3.9 3.9 4.1 4.1 5.1 7.5 7.5 7.5 8.2 8.2 10.5 13.5 13.5 13.5 13.5 13.5 13.5 10.2 10.2 10.2 10.2 10.2 10.2 1000 1000 1000 1000 1000 800 2000 2000 2000 2000 2000 1600 700 700 700 600 600 600 0.7 0.7 0.7 0.9 0.9 1.2 53 44 37 35 30 24 2000 2000 2000 2000 2000 2000 PME271YA4100MR30 PME271YA4150MR30 PME271YA4220MR30 PME271YA4250MR30 PME271YA4330MR30 PME271YA4470MR30 0.0068 0.010 0.015 0.022 5.2 5.2 5.5 7.3 10.5 10.5 11.0 13.0 18.5 18.5 18.5 18.5 15.2 15.2 15.2 15.2 500 500 500 400 1000 1000 1000 800 600 600 500 400 1.7 1.7 2.0 3.0 19 16 13 9.8 1400 1400 1400 1400 PME271YB4680MR30 PME271YB5100MR30 PME271YB5150MR30 PME271YB5220MR30 0.033 0.047 0.068 7.6 9.0 11.3 14.0 15.0 16.5 24.0 20.3 24.0 20.3 24.0 20.3 250 200 150 1500 1200 1000 250 250 180 4.0 5.0 7.0 7.0 6.0 4.6 1000 1000 1000 PME271YC5330MR30 PME271YC5470MR30 PME271YC5680MR30 0.033 0.047 0.068 0.10 8.0 8.0 10.0 12.0 17.0 17.0 19.0 22.0 27.0 27.0 27.0 27.0 22.5 22.5 22.5 22.5 200 200 150 100 1200 1200 1000 800 250 250 200 5.5 5.5 7.5 10.0 6.8 5.8 4.8 3.8 600 600 600 600 PME271YD5330MR30 PME271YD5470MR30 PME271YD5680MR30 PME271YD6100MR30 0.10 0.15 12.1 15.3 19.0 22.0 30.5 25.4 30.5 25.4 100 75 800 600 10.0 15.0 3.9 3.1 400 400 PME271YE6100MR30 PME271YE6150KR30 166 PME271Y MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference S EN 132400 9920003/01 (250 VAC), 9834228/01 (300 VAC) N EN 132400 P99101381 (250 VAC) D EN 132400 DK99-01992 (250 VAC) FI EN 132400 208122 (250 VAC) VDE EN 132400 121344 (250 VAC) 118222 (300 VAC) SEV EN 132400 99.7 70329.01 (250 VAC) IMQ EN 132400 V 4773 (250 VAC) UL UL 1283 (UR = 250 VAC) E 100117 (250 VAC) CSA C 22.2 No. 8 53108 (250 VAC) ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. * * * * * * * RIFA RIFA article code Rated capacitance Rated voltage Y2 SH, for self-healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Approval marks * Manufacturing code (year, month) PACKING Capacitors in standard design (lead length 30 mm) and with L < 24 mm and lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/ package as per article table. Capacitors with L 24 mm and lead length 5 or 6 mm are packed on trays piled in a box with dimensions 300 x 260 x 195 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 167