BC817-16LT1, BC817-25LT1, BC817-40LT1 General Purpose Transistors NPN Silicon http://onsemi.com Features * Pb-Free Packages are Available COLLECTOR 3 1 BASE MAXIMUM RATINGS Rating Symbol Value Unit Collector -Emitter Voltage VCEO 45 V Collector -Base Voltage VCBO 50 V Emitter -Base Voltage VEBO 5.0 V IC 500 mAdc Collector Current - Continuous 2 EMITTER 3 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1 2 THERMAL CHARACTERISTICS Characteristic Symbol Total Device Dissipation FR- 5 Board, (Note 1) TA = 25C Derate above 25C PD Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate, (Note 2) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature Max Unit 225 1.8 mW mW/C 556 C/W 300 2.4 mW mW/C RJA 417 C/W TJ, Tstg -55 to +150 C RJA SOT-23 CASE 318 STYLE 6 MARKING DIAGRAM PD xxD xx D 1. FR-5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina. = Specific Device Code = Date Code ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2004 June, 2004 - Rev. 6 1 Publication Order Number: BC817-16LT/D BC817-16LT1, BC817-25LT1, BC817-40LT1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (IC = -10 mA) V(BR)CEO 45 - - V Collector -Emitter Breakdown Voltage (VEB = 0, IC = -10 A) V(BR)CES 50 - - V Emitter -Base Breakdown Voltage (IE = -1.0 A) V(BR)EBO 5.0 - - V - - - - 100 5.0 nA A 100 160 250 40 - - - - 250 400 600 - OFF CHARACTERISTICS Collector Cutoff Current (VCB = 20 V) (VCB = 20 V, TA = 150C) ICBO ON CHARACTERISTICS DC Current Gain (IC = 100 mA, VCE = 1.0 V) BC817-25 BC817-40 (IC = 500 mA, VCE = 1.0 V) hFE BC817-16 - Collector -Emitter Saturation Voltage (IC = 500 mA, IB = 50 mA) VCE(sat) - - 0.7 V Base -Emitter On Voltage (IC = 500 mA, VCE = 1.0 V) VBE(on) - - 1.2 V fT 100 - - MHz Cobo - 10 - pF SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) ORDERING INFORMATION Device Shipping Specific Marking Code Package BC817-16LT1 6A SOT-23 BC817-16LT1G 6A SOT-23 (Pb-Free) 3,000 / Tape & Reel BC817-16LT3 6A SOT-23 10,000 / Tape & Reel BC817-25LT1 6B SOT-23 BC817-25LT1G 6B SOT-23 (Pb-Free) BC817-25LT3 6B SOT-23 BC817-25LT3G 6B SOT-23 (Pb-Free) BC817-40LT1 6C SOT-23 BC817-40LT1G 6C SOT-23 (Pb-Free) BC817-40LT3 6C SOT-23 BC817-40LT3G 6C SOT-23 (Pb-Free) SBC817-40LT1 6C SOT-23 3,000 / Tape & Reel SBC817-40LT3 6C SOT-23 10,000 / Tape & Reel 3,000 / Tape & Reel 10,000 / Tape & Reel 3,000 / Tape & Reel 10,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 BC817-16LT1, BC817-25LT1, BC817-40LT1 hFE, DC CURRENT GAIN 1000 VCE = 1 V TJ = 25C 100 10 0.1 1.0 10 100 IC, COLLECTOR CURRENT (mA) 1000 1.0 1.0 TJ = 25C TA = 25C 0.8 0.8 V, VOLTAGE (VOLTS) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 1. DC Current Gain 0.6 IC = 10 mA 0.4 100 mA 300 mA 500 mA VBE(on) @ VCE = 1 V 0.6 0.4 0.2 0.2 VCE(sat) @ IC/IB = 10 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 0 100 1 Figure 2. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) 1000 Figure 3. "On" Voltages 100 +1 VC for VCE(sat) 0 C, CAPACITANCE (pF) V, TEMPERATURE COEFFICIENTS (mV/C) VBE(sat) @ IC/IB = 10 -1 VB for VBE -2 1 10 100 IC, COLLECTOR CURRENT (mA) Cib 10 Cob 1 0.1 1000 Figure 4. Temperature Coefficients 1 10 VR, REVERSE VOLTAGE (VOLTS) Figure 5. Capacitances http://onsemi.com 3 100 BC817-16LT1, BC817-25LT1, BC817-40LT1 PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-09 ISSUE AI NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318-01, -02, AND -06 OBSOLETE, NEW STANDARD 318-09. A L 3 1 V B 2 S DIM A B C D G H J K L S V G C D H J K INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0385 0.0498 0.0140 0.0200 0.0670 0.0826 0.0040 0.0098 0.0034 0.0070 0.0180 0.0236 0.0350 0.0401 0.0830 0.0984 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.99 1.26 0.36 0.50 1.70 2.10 0.10 0.25 0.085 0.177 0.45 0.60 0.89 1.02 2.10 2.50 0.45 0.60 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. BC817-16LT1/D