SiBar Thyristor Surge Protectors TVBxxxSA-L Series Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications. Benefits: Features: * RoHS compliant * Helps provide protection for sensitive telecom electronic equipment * Bidirectional crowbar transient voltage protection * Low leakage current * Broad voltage range 58V - 300V with improved Vdrm/Vbo voltage range * Low power dissipation * High off-state impedance * Fast, reliable operation * Low on-state voltage * No wear-out mechanisms * High surge capability * Helps designers meet worldwide telecom standards * Short-circuit failure mode * Helps reduce warranty and service costs * Surface-mount technology * Easy installation * DO-214AA SMB package * Helps improve power efficiency of equipment * 10 x 1000 s 50A surge rating * Helps equipment comply with TIA-968, Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45 Applications: * Modems * Set top boxes * Fax machines * POS systems * Phones, answering machines * Analog and digital linecards (xDSL, T1/E1...) * PBX systems * Other customer premise and central office network equipment requiring protection Document: SCD 27284 SiBar Thyristor Surge Protectors (c) 2009 Tyco Electronics Corporation. All rights Reserved. Status: Released 1 Rev: C Date: SEPTEMBER 29, 2009 SiBar Thyristor Surge Protectors TVBxxxSA-L Series Table SB1 - Electrical Characteristics Off-State Current VD2=VDM (A) 5 Part Number VDM Max. (V) VBO Max. (V) IH Min. (mA) VT Max. (V) C1 (Typ) 50VDC Bias C2 (Typ) 2VDC Bias TVB058SA-L 58 77 150 4 43 80 TVB170SA-L 170 265 150 4 18 35 5 TVB180SA-L 180 219 150 4 30 (Max) 60 (Max) 5 TVB200SA-L 200 320 150 4 18 35 5 TVB270SA-L 270 365 150 4 15 32 5 TVB300SA-L 300 400 150 4 14 27 5 Notes: All electrical characteristics are measured at 25C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 A. VBO measured at 100V/s. C1 measured at 1 MHz with a 50 VDC bias. C2 measured at 1MHz with a 2VDC bias. Table SB2 - Surge Current Rating TIA-968 Type A Part Number TVBxxxSA-L Ipp(A) 5 x 320 s Telcordia GR-1089* IEC61000-4-5 Ipp (A) Ipp (A) 10 x 1000 s 2 x 10 s Ipp (A) 8 x 20 s ITU K.20/21/45* Type B Ipp(A) pp (A) 10 x 560 s 10 x 160 s 90 70 100 50 150 150 ITSM IPP (A) di/dt dV/dt 5 x 310 s Min. (A/s) (V/s) (VOC: 10 x 700s) (A) 90 22 500 2000 Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30F). dV/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25C Document: SCD 27284 SiBar Thyristor Surge Protectors (c) 2009 Tyco Electronics Corporation. All rights Reserved. Status: Released 2 Rev: C Date: SEPTEMBER 29, 2009 SiBar Thyristor Surge Protectors TVBxxxSA-L Series Table SB3 - Dimensions in Millimeters A Dimension B Min. TVBxxxSA-L Max. TVBxxxSA-L Max. Min. D Max. Min. Max. 4.06 4.57 3.30 3.94 1.90 2.41 1.95 2.20 (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.087) H Dimension C Min. J Min. Max. K Min. Max. P Min. Max. S Ref Min Max. 0.051 0.200 0.150 0.31 0.76 1.27 0.51 5.21 5.59 (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.202) (0.205) (0.220) Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation Table SB4 - Physical Characteristics and Environmental Specifications Lead material Matte tin finish (-L devices) Encapsulating material Epoxy, meets UL94V-0 requirements Solderability per MIL-STD-750, Method 2026 Solder heat withstand per MIL-STD-750, Method 2031 Solvent resistance per MIL-STD-750, Method 1022 Mechanical shock per MIL-STD-750, Method 2016 Vibration per MIL-STD-750, Method 2056 Storage temperature (C) -55 to 150 Operating temperature (C) -40 to 125 Junction temperature (C) 175 Maximum Lead Temperature for Soldering Purpose; for 10s (C) 260 Table SB5 - Reliability Tests Test Conditions Duration High temperature, reverse bias +100C, 50VDC bias 1000 hours High humidity, high temperature, reverse bias 85% RH, +85C, 50VDC bias 1000 hours High temperature storage life +150C 1000 hours Temperature cycling -65C to +150C, 15 minute dwell 1000 cycles Autoclave 100% RH, +121C, 15 PSI 96 hours Document: SCD 27284 SiBar Thyristor Surge Protectors (c) 2009 Tyco Electronics Corporation. All rights Reserved. Status: Released 3 Rev: C Date: SEPTEMBER 29, 2009 SiBar Thyristor Surge Protectors TVBxxxSA-L Series Document: SCD 27284 SiBar Thyristor Surge Protectors (c) 2009 Tyco Electronics Corporation. All rights Reserved. Status: Released 4 Rev: C Date: SEPTEMBER 29, 2009 SiBar Thyristor Surge Protectors TVBxxxSA-L Series Table SB6 - Packaging and Marking Information Recommended Pad Layout (millimeters/inchs) Part Description Tape and Reel Quantity Standard Package Part Marking Dimension A (Nom.) Dimension B (Nom.) Dimension C (Nom.) Agency Recognition* TVB058SA-L 2,500 10,000 058A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) -- TVB170SA-L 2,500 10,000 170A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB180SA-L 2,500 10,000 180A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB200SA-L 2,500 10,000 200A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB270SA-L 2,500 10,000 270A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB300SA-L 2,500 * UL497B, File # E179610 10,000 300A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL 308 Constitution Drive, MS R21/2A Menlo Park, CA USA 94025-1164 Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508 www.circuitproection.com www.circuitprotection.com.hk (Chinese) www.circuitprotection.jp (Japanese) Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners. Document: SCD 27284 SiBar Thyristor Surge Protectors (c) 2009 Tyco Electronics Corporation. All rights Reserved. Status: Released 5 Rev: C Date: SEPTEMBER 29, 2009