www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
76 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
For more than 20 years Vishay Vitramon has supported the Automotive Industry with robust, highly reliable MLCCs that have
made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT/NME) with
a wet build process. They are qualified according to AEC Q-200 with PPAP available on request. Applications for these devices
include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % tin plate matte and AgPd
which is used with silver epoxy bonding. A Polymer (flexible) termination with 100 % tin plate matte finish is under full qualification
and expected to be released early 2008.
C0G (NP0) DIELECTRIC
GENERAL SPECIFICATIONS
Note:
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(above + 125 °C characteristics 2.3)
Temperature Coefficient of Capacitance (TCC):
± 30 ppm/°C from - 55 °C to + 125 °
Dissipation Factor (DF):
0.1 % maximum at 1.0 Vrms and
1 kHz for values > 1000 pF
0.1 % maximum at 1.0 Vrms and
1 MHz for values > 1000 pF
Voltage Range:
25 Vdc to 3000 Vdc
Insulating Resistance:
At + 25 °C 100 000 MΩ min or 1000 ΩF whichever is less
At + 125 °C 10 000 MΩ min or 100 ΩF whichever is less
Aging: 0 % maximum per decade
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current
does not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630 Vdc/1000 Vdc: DWV at 150 % of rated voltage
3000 Vdc: DWV at 120 % of rated voltage
X7R DIELECTRIC
GENERAL SPECIFICATIONS
Note:
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(above + 125 °C characteristics 2.3)
Capacitance Range: 100 pF to 1.0 µF
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from - 55 °C to 125 °C, with 0 Vdc applied
X5R: ± 15 % from - 55 °C to 85 °C, with 0 Vdc applied (5)
Dissipation Factor (DF):
≤ 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz
≤ 25 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz
Aging Rate: 1 % maximum per decade
Voltage Range:
10 Vdc to 1000 Vdc
Insulating Resistance:
At + 25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
At + 125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 s period and the charge/discharge current does
not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630 Vdc/1000 Vdc: DWV at 150 % of rated voltage
VJ....31/VJ....34 Automotive MLCC
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Vishay Vitramon
Document Number: 45040 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 03-Apr-08 77
Notes:
(1) DC voltage rating should not be exceeded in application
(2) Case size designator may be replaced by a four digit drawing number
(3) Polymer termination under qualification. Expected 2008
(4) Per customer request. Contact: mlcc@vishay.com for availability
(5) Selected values for X5R, see dielectric selection chart
PART DESCRIPTION
VJ0805 (2) Y102 K XA A C31
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION DC VOLTAGE
RATING (1)
MARKING PACKAGING PROCESS
CODE
0402
0603
0805
1206
1210
1812
A = NP0
(C0G)
Y = X7R
G = X5R (5)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples:
4R7 = 4.7 pF
102 = 1000 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
J = ± 5 %
K = ± 10 %
M = ± 20 %
Note:
NP0 (C0G):
B, C, D < 10 pF
F, G , J ≥ 10 pF
X7R: J, K, M
X = Ni barrier
100 % tin
plate matte
finish
B = Polymer
100 % tin
plate matte
finish (3)
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
T = 400V
E = 500 V
L = 630 V
G = 1000 V
H = 3000 V
A = Unmarked
B = Marked
Note: Marking
is only available
for 0805 and
1206 vendor ID
and date code
31 =
Automotive
100 % tin
plate matte
finish
E = 7" reel/plastic tape
C = 7" reel/paper tape
M = 11 1/4"/13" reel/plastic
tape
P = 11 1/4"/13" reel/paper
tape
PART DESCRIPTION
VJ0805 (2) Y102 K F A A T34
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION DC VOLTAGE
RATING (1)
MARKING PACKAGING PROCESS
CODE
0402
0603
0805
1206
1210
1812
A = NP0
(C0G)
Y = X7R
G = X5R (5)
Expressed in
picofarads
(pF). The first
two digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples:
102 = 1000 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
J = ± 5 %
K = ± 10 %
M = ± 20 %
Note:
NP0 (C0G)
B,C, D < 10 pF
F, G , J , ≥ 10 pF
X7R: J, K, M
F = AgPd Q = 10 V
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V (4)
T = 400 V (4)
E = 500 V
L = 630 V
G = 1000 V
H = 3000 V
A = Unmarked
Note: Marking
is not available
34 =
Automotive
AgPd finish
E = 7" reel/plastic tape
O = 7" reel/flamed paper tape
M = 11 1/4"/13" reel/plastic
tape
I = 11 1/4"/13" reel/ flamed paper
tape
Note: “I” and “O” is used for
“F” termination size
0402/0603/0805
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
78 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Notes:
•• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)”
(1) See soldering recommendations
(2) 1812 - 1000 V/3000 V, please contact for availability: mlcc@vishay.com
C0G (NP0) DIELECTRIC
STYLE VJ0402 VJ0603 VJ0805 VJ1206 VJ1210 (1) VJ1812 (1) (2)
EIA TYPE 0402 0603 0805 1206 1210 1812
VOLTAGE (Vdc)
25 50 100 50 100 200 50 100 200 500 50 100 200 500/
630 50 100 200 500/
630 50 100 200 500/
630 1000 3000
CAP.
CODE CAP.
1R0 1.0 pF •• •• •• •• •• •• •• •• •• •• • • • •
1R2 1.2 pF •• •• •• •• •• •• •• •• •• •• • • • •
1R5 1.5 pF •• •• •• •• •• •• •• •• •• •• • • • •
1R8 1.8 pF •• •• •• •• •• •• •• •• •• •• • • • •
2R2 2.2 pF •• •• •• •• •• •• •• •• •• •• • • • •
2R7 2.7 pF •• •• •• •• •• •• •• •• •• •• • • • •
3R3 3.3 pF •• •• •• •• •• •• •• •• •• •• • • • •
3R9 3.9 pF •• •• •• •• •• •• •• •• •• •• • • • •
4R7 4.7 pF •• •• •• •• •• •• •• •• •• •• • • • •
5R6 5.6 pF •• •• •• •• •• •• •• •• •• •• • • • •
6R8 6.8 pF •• •• •• •• •• •• •• •• •• •• • • • •
8R2 8.2 pF •• •• •• •• •• •• •• •• •• •• • • • •
100 10 pF •• •• •• •• •• •• •• •• •• •• • • • •
120 12 pF •• •• •• •• •• •• •• •• •• •• • • • • •
150 15 pF •• •• •• •• •• •• •• •• •• •• • • • • •
180 18 pF •• •• •• •• •• •• •• •• •• •• • • • • •
220 22 pF ++ ++ ++ •• •• •• •• •• •• •• • • • • •
270 27 pF ++ ++ ++ •• •• •• •• •• •• •• • • • • •
330 33 pF ++ ++ ++ •• •• •• •• •• •• •• • • • • •
390 39 pF ++ ++ ++ •• •• •• •• •• •• •• • • • • • • • • • •
470 47 pF ++ ++ ++ •• •• •• •• •• •• •• • • • • • • • • • •
560 56 pF ++ ++ ++ ++ ++ ++ •• •• •• •• • • • • • • • • • •
680 68 pF ++ ++ ++ ++ ++ ++ •• •• •• •• • • • • • • • • • •
820 82 pF ++ ++ ++ ++ ++ ++ •• •• •• •• • • • • • • • • • •
101 100 pF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + + + + + + • • • • • •
121 120 pF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + + + + + + • • • • • •
151 150 pF ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + + + + + + • • • • •
181 180 pF ++ ++ ++ ++ + ++ ++ ++ ++ + + + + + + + + • • • • •
221 220 pF ++ ++ + ++ ++ ++ + + + + + + + + + • • • • •
271 270 pF ++ ++ + ++ ++ ++ + + + + + + + + + • • • • •
331 330 pF ++ ++ ++ ++ ++ + + + + + + + + + • • • • •
391 390 pF ++ ++ ++ ++ ++ + + + + + + + + + • • • • •
471 470 pF ++ ++ ++ ++ + + + + + + + + • • • • •
561 560 pF ++ ++ ++ ++ + + + + + + + + • • • • •
681 680 pF ++ ++ ++ ++ + + + + + + + + • • • • •
821 820 pF ++ ++ ++ + + + + + + + + • • • • •
102 1000 pF ++ ++ ++ + + + + + + + + • • • • •
122 1200 pF ++ + + + + + + + + • • • • •
152 1500 pF ++ + + + + + + + + • • • • •
182 1800 pF + + + + + + + + + • • • • •
222 2200 pF + + + + + + + • • • • •
272 2700 pF + + + + + + + • • • •
332 3300 pF + + + + + + + • • • •
392 3900 pF + + + + + + • • • •
472 4700 pF + + + + + • • • •
562 5600 pF + + + + + • • •
682 6800 pF + + + + + • • •
822 8200 pF + + + + + • • •
103 0.010 µF + + + + + • • •
123 0.012 µF ++ + •• •
153 0.015 µF ++ ••
183 0.018 µF ++ •
223 0.022 µF ++ •
273 0.027 µF
333 0.033 µF
393 0.039 µF
473 0.047 µF
563 0.056 µF
VJ....31/VJ....34 Automotive MLCC
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Vishay Vitramon
Document Number: 45040 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 03-Apr-08 79
Notes:
•• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)”
(1) Soldering recommendations
(2) 1812 - 1000 V/3000 V, please contact for availability: mlcc@vishay.com
X7R DIELECTRIC (2)
STYLE VJ0402 VJ0603 VJ0805 VJ1206 VJ1210 (1) VJ1812 (1) (2)
EIA TYPE 0402 0603 0805 1206 1210 1812
VOLTAGE
(Vdc)
16 25 50 100 16 25 50 100 200
10
16 25 50 100 200 500 16 25 50 100 200 500/
630 16 25 50 100 200 500/
630 50 100 200 500/
630 1000
CAP.
CODE CAP.
121 120 pF •• •• •• •
151 150 pF •• •• •• •
181 180 pF •• •• •• •
221 220 pF •• •• •• •
271 270 pF •• •• •• •
331 330 pF •• •• •• •• •• •• •• •
391 390 pF •• •• •• •• •• •• •• •• •• ••
471 470 pF •• •• •• •• •• •• •• •• •• •• •• •• •• ••
561 560 pF •• •• •• •• •• •• •• •• •• •• •• •• •• ••
681 680 pF •• •• •• •• •• •• •• •• •• •• •• •• •• ••• • •
821 820 pF •• •• •• •• •• •• •• •• •• •• •• •• •• ••• • •
102 1000 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •••• • • •
122 1200 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •••• • • •
152 1500 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •••• • • •
182 1800 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •••• • • •
222 2200 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •••• • • •
272 2700 pF •• •• ++ •• •• •• •• •• •• •• •• •• •• •••• • • •
332 3300 pF •• •• ++ •• •• •• •• •• •• •• •• •• •• •••• • • • •
392 3900 pF •• •• ++ •• •• •• •• •• •• •• •• •• •• •••• • • • •
472 4700 pF •• •• ++ •• •• •• •• •• •• •• •• •• •• •••• • • • •
562 5600 pF •• ++ •• •• •• •• •• •• •• •• •• •••• • • • •
682 6800 pF •• ++ •• •• •• •• •• •• •• •• •• •••• • • • •
822 8200 pF •• ++ •• •• •• •• •• •• •• •• •• •••• • • • •
103 0.010 µF ++ ++ ++ •• •• •• •• •• •• •• •• •• ••••• •••••• • • •
123 0.012 µF ++ ++ •• •• •• •• •• •• •• •• • ••••• •••••• • ••
153 0.015 µF ++ ++ •• •• •• ++ •• •• •• •• • ••••• •••••• • ••
183 0.018 µF ++ ++ •• •• •• ++ •• •• •• •• • •••••+••••• • ••
223 0.022 µF ++ •• •• •• ++ •• •• •• •• • •••• • •••• • +••• •
273 0.027 µF ++ •• •• •• ++ •• •• •• •• •••• • •••• • +••• •
333 0.033 µF ++ •• •• ++ ++ •• •• •• • •••• • •••• • +••• •
393 0.039 µF •• •• ++ ++ •• •• •• • •••• • •••• • +••• •
473 0.047 µF •• •• ++ •• •• •• • •••• • •••• • ••• •
563 0.056 µF •• ++ ++ •• •• •• • •••• • •••• • ••• •
683 0.068 µF •• ++ ++ + + + + • • • • • • • • • • • • • •
823 0.082 µF •• ++ ++ + + + + • • • • + • • • • • • • • •
104 0.10 µF ++ ++ ++ + + + • • • + + • • • + + • • •
124 0.12 µF + + + + + • • • + • • • + + • • •
154 0.15 µF + + + + + • • + + • • • + + • • •
184 0.18 µF + + • • + + • • • + • • •
224 0.22 µF + + + + + + + + + + • • •
274 0.27 µF + + + + + + + + + + • • •
334 0.33 µF + + + + + + + + + • •
394 0.39 µF + + + + + + + + • •
474 0.47 µF + + + + + + + + • +
564 0.56 µF + + + + + + • +
684 0.68 µF + + + + + + • +
824 0.82 µF + + + + + + + +
105 1.0 µF + + + + + + +
125 1.2 µF
155 1.5 µF
185 1.8 µF
225 2.2 µF
275 2.7 µF
335 3.3 µF
395 3.9 µF
475 4.7 µF
565 5.6 µF
685 6.5 µF
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
80 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Notes:
(1) REFERENCE: EIA Standard RS 481 – “Taping of Surface Mount Components for Automatic Placement”
(2) N/a = Not available
(3) Quantity can vary with customer request
(4) Flamed paper tape code “O” (7" reel) and “I” (11 1/4/13" reel) for AgPd terminated parts (termination code F)
(5) Packaging “C/P” or “E/M” and quantity can depend from product thicknes
(6) Drawing 7159/9159 per customer request. Please contact: mlcc@vishay.com
PRODUCT DRAWINGS (in use)
X-TERMINATION CODE
(100 % MATTE TIN)
F - TERMINATION CODE
(AgPd)
SIZE CODE DRAWING NP0 DRAWING X7R DRAWING NP0 DRAWING X7R
0402 •• = Papertape 7175 9172 7175 9072
++ = Papertape 7172 7172 7072 7072
0603
•• = Papertape 7179 9155 7179 9097
++ = Papertape 7155 7155 7097 7097
• = Plastictape 7179 9155 7179 9097
+ = Plastictape 7155 7155 7097 7097
0805
•• = Papertape 7188 9156 7188 9080
++ = Papertape 7156 7156 7080 7080
• = Plastictape 7188 9156 7188 9080
+ = Plastictape 7156 7156 7080 7080
1206 • = Plastictape 7180 9157 7180 9081
+ = Plastictape 7157 7157 7081 7081
1210 • = Plastictape 7190 9158 7190 9099
+ = Plastictape 7158 7158 7099 7099
1812 (6)
• = Plastictape 7159/7979 7159/9979 7082/7979/9979 9082/7979/9979
+ = Plastictape 7159/7979 7159/9159
7979/9979 7082/7979/9979 7082/9082
7979/9979
STANDARD PACKAGING QUANTITIES (1) (2)
7" REEL
QUANTITIES
11 1/4" AND 13" REEL
QUANTITIES
BODY SIZE TAPE SIZE
PAPER TAPE
PACKAGING CODE
“C”/“O” (4)
PLASTIC TAPE
PACKAGING CODE
“E”
PAPER TAPE
PACKAGING CODE
“P”/“I” (4)
PLASTIC TAPE
PACKAGING CODE
“M”
0402 8 mm 5000/10 000 N/a 10 000/30 000 (3) N/a
0603 8 mm 4000 N/a 10 000 N/a
0805 (5) 8 mm 3000 3000 10 000 10 000
1206 (5) 8 mm N/a 3000 N/a 10 000
1210 (5) 8 mm N/a 3000 N/a 10 000
1812 12 mm N/a 1000 N/a 5000
VJ....31/VJ....34 Automotive MLCC
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Vishay Vitramon
Document Number: 45040 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 03-Apr-08 81
1 - GENERAL CERTIFICATES
2 - TECHNICAL REQUIREMENTS
Unless specified in component specification, these parameters are the minimum requirements for the components.
2.1 - OPERATING TEMPERATURE RANGE
2.2 - STORAGE TEMPERATURE RANGE
2.3 - CHARACTERISTICS
# Quality Management System acc. to ISO/TS 16949 certified Yes
# Quality Management System acc. to ISO9000, Rev. 2000 certified Yes
# Environmental Certification acc. to ISO 14001 Yes
For standard applications TA: - 55 °C to + 125 °C see characteristics 2.3
For high temperature applications TA: - 55 °C to + 150 °C see characteristics 2.3
For ultra high temperature applications TA: - 55 °C to + 175 °C see characteristics 2.3
Comment: Only for the part without packaging TA: - 55 °C to + 150 °C
PARAMETER CERAMIC
TYPE SYMBOL RATINGS TEST CONDITIONS/
REMARKS
Rated voltage in temperature range - 55 °C to + 125 °C NP0 (C0G),
X7R UR10 V - 500 V
Derating at higher temperature NP0 (C0G),
X7R N/a 10 V - 100 V + 150 °C U ≤ ½ UR
+ 175 °C U ≤ ¼ UR
Temperature coefficient in temperature range
- 55 °C to + 125 °C
NP0 (C0G),
X7R
αC
ΔC
≤ ± 30 ppm/K
≤ ± 15 %
if CR < 10 pF:
αC ≤ ± 120 ppm/K
Temperature coefficient in temperature range
- 55 °C to + 150 °C
For typical data see graphs below
NP0 (C0G),
X7R
αC
ΔC
≤ ± 30 ppm/K
+ 15/- 30 %
+ 15/- 50 %
- 55 °C to + 150 °C
- 55 °C to + 150 °C
- 55 °C to + 175 °C
Dissipation factor in temperature range
- 55 °C to + 175 °C NP0 (C0G),
X7R tan δ≤ 0.0015
tan δ ≤ 0.06
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
82 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
2.3.1 - C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
0.6
0.2
0.0
- 0.2
- 0.2
- 0.6
0.4
- 50 0100 150
50
TYPICAL PARAMETER NP0 (C0G)
TEMPERATURE DEPENDENCE OF CAPACITANCE
TEMPERATURE IN °C
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
TYPICAL PARAMETER C0G (NP0)
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
DC VOLTS APPLIED
0.2
0.1
- 0.1
- 0.2
0.0
0 10 20 30 40 50 60 70 80 90 100
AGING RATE - NP0
HOURS
100 1000 10 00
0
0.2
0.1
0.0
- 0. 1
- 0. 2
% CAP ACIT ANCE CHANGE
TYPICAL PARAMETER C0G (NP0)
110 20 40 60 80 100 120 140
107
106
105
104
TYPICAL PARAMETER C0G (NP0)
ISOLATION RESISTANCE
INSULATION RESISTANCE IN MΩ
TEMPERATURE IN °C
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
2
1
0
-1
-2
% CAPACITANCE CHANGE
+
+
TYPICAL PARAMETER C0G (NP0)
CHANGE OF CAPACITANCE WITH FREQUENCY - NP0
CHANGE OF CAPACITANCE WITH FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
0.00025
DISSIPATION FACTOR
0.0005
0.001
TYPICAL PARAMETER C0G (NP0)
VJ....31/VJ....34 Automotive MLCC
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Vishay Vitramon
Document Number: 45040 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 03-Apr-08 83
2.3.2. COG (NP0) DIELECTRIC - TYPICAL PARAMETERS
0.003
0.002
0.001
0.000
VOLTAGE
DISSIPATION FACTOR
TYPICAL PARAMETER C0G (NP0)
DISSIPATION FACTOR VS. VOLTAGE
0 10 20 30 40 50 60 70 80 90 100 UN/V
X7R DIELECTRIC - TYPICAL PARAMETERS
15
10
5
0
- 5
- 10
- 15
- 20
TEMPERATURE °C
% CAPACITANCE CHANGE
X7R
- 25
- 30
TYPICAL PARAMETER X7R
TEMPERATURE COEFFICIENT OF CAPACITANCE
- 75 - 50 - 25 0 20 50 75 100 125 150 175
TYPICAL PARAMETER X7R
VOLTAGE COEFFICIENT OF CAPACITANCE - X7R
0
- 15
- 20
- 25
- 30
% CAPACITANE CHANGE
- 10
5
5
25 V
50 V
RATED
100 V
RATED
RATED
0 10 20 30 40 50 60 70 80 90 100
DC VOLTS APPLIED
- 75 - 50 - 25 75 100 125
100
50
VOLTAGE VS. TEMPERATURE
TEMPERATURE °C
% VOLTAGE
150 175
0
TYPICAL PARAMETER X7R
150
200
02050 180
10 000
1000
100
10
MINIMUM ISOLATION RESISTANCE OF X7R
CLASS 2 MULTILAYER CERAMIC CAPACITORS
20 40 60 80 100 120 140 160 180
TEMPERATURE IN °C
INSULATION RESISTANCE IN ΩF
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
84 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
X7R DIELECTRIC - TYPICAL PARAMETERS
150 175
- 75 - 50 - 25 0 25 50 7 5 100 125
0.0
TEMPERATURE °C
% DISSIPATION FACTOR
X7R
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
TYPICAL PARAMETER X7R
DISSIPATION FACTOR VS. TEMPERATURE
0.020
0.016
0.012
0.008
0.004
TYPICAL PARAMETER X7R
DISSIPATION FACTOR VS. VOLTAGE
50 V
100 V
VOLTAGE
DISSIPATION FACTOR
0 10 20 30 40 50 60 70 80 90 100
UN/V-
HOURS
1.0
0.0
- 1.0
- 2.0
% CAPACITANCE CHANGE
- 3.0
- 4.0
TYPICAL PARAMETER X7R
AGING RATE - X7R
1 10 100 1000 10 000
TYPICAL PARAMETER X7R
CHANGE OF DISSIPATION FACTOR WITH FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
% DISSIPATION FACTOR
20
10
5
15
0
CHANGE OF CAPACITANCE WITH FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
% CAPACITANCE CHANGE
- 10
0
TYPICAL PARAMETER X7R
- 20
TYPICAL PARAMETER X7R
DISSIPATION FACTOR VS. VOLTAGE
0100 200 300 400 500 600
0.020
0.016
0.012
0.008
0.000
500/630 V
200 V
VOLTAGE
DISSIPATION FACTOR
VJ....31/VJ....34 Automotive MLCC
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Vishay Vitramon
Document Number: 45040 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 03-Apr-08 85
3.3. - LOT ACCEPTANCE TESTS
Process tests available in classes (on request)
The supplier shall submit the records in electronic format on a monthly basis.
3.3.1
Acceptance criteria: Zero defects (IRATS and BIATS).
3.3.2
3.3.3 Solderability/Resistance to Soldering Heat
Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C.
Test is done on a regular basis for samples taken randomly out of the line.
Acceptance criteria: At least 95 % new solder and no detachment or leaching of terminations.
Solder-ability is guaranteed at least for one year when stored in original package.
Remark: For recommendation only for reflow soldering, see range information (on page 1).
4. ENVIRONMENTAL REQUIREMENTS
A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available
on request.
Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the smallest
volumes.
The manufacturer/supplier confirms that the component during normal handling, storage and assembly, as well as during
operation in the automobile, is non toxic.
DIMENSIONS in millimeters
SIZE 0402 0603 0805 1206 1210 1812
LENGTH 1.0 + 0.1/- 0.5 1.6 ± 0.12 2.0 ± 0.2 3.2 ± 0.25 3.2 ± 0.25 4.50 ± 0.25
WIDTH 0.50 ± 0.1 0.8 ± 0.12 1.25 ± 0.2 1.6 ± 0.25 2.5 ± 0.25 3.20 ± 0.25
THICKNESS
MAXIMUM 0.60 0.97 1.40 1.70 1.94 2.18
Information for typical thickness per capacitor is available on request.
CLASS ACTION
AComponents are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the
selected component to the customer during the component specification discussions.
BComponents (customer P/N) shall be tested quarterly. Records available only on special request by the customer.
CTest with each shipment. Records are provided on a monthly basis.
Customer special requirement; requirement should be determined in a specific component specification.
THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY (BIATS)
SAMPLE SIZE 200
HANDLING Mounted on PCB
THERMAL SHOCK 1 x 280 °C, no pre-heat, 5 to 10 s
IR - TEST (IRATS) U = Ur, T = room temperature, verified
BURN IN
Equivalent to 12 h burn-in,
2 x Ur/125 °C,
verification time to failure
BOARD FLEX
SAMPLE SIZE 20 pcs/lot
X7R Every lot
COG At least three different part numbers of one component family matrix per quarter
MAX DEFLECTION 8 mm (data to be reported, available on request)
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
86 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
5. INSPECTION CRITERIA
5.1 VISUAL INSPECTION - CRITERIA
The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting
appropriate to the specimen under test and the required quality level.
Chipping
The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component
shall be less than 5 % of the surface of the MLCC.
Delamination or Exposed Electrodes
No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of
the capacitor must be seen.
Metallization
For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and
gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Leaching shall
not exceed 25 %.
Electrode Distance
The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes.
The minimum distance ‘d’ is 400 µm for all package sizes, except 0603. For the component package ‘0603’ the minimum distance
is 200 µm.
C
AB
D
VJ....31/VJ....34 Automotive MLCC
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
Vishay Vitramon
Document Number: 45040 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 03-Apr-08 87
6. - BOARD FLEX/DEFINITION OF TEST CONDITIONS PCB
PCB thickness = (1.6 ± 0.1) mm
Copper thickness = 35 µm
Material FR4 (EP-GC 02 according to DIN 40 802)
LL = total length; LB = width of the pad; LEL = single pad length
SOLDERING INSTRUCTIONS
Type of recommended solder;
reflow: 63/37 SnPb (DIN 32513)
wave: 63/37
TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING
LAYOUT/PAD DESIGN Dimensions in mm
TYPE PAD SIZE
LL LB LEL
0603 2.2 1.0 0.75
0805 3.4 1.3 1.2
1206 4.5 1.8 1.2
1210 4.5 2.8 1.3
LEL
LL
LB
THICKNESS, RECOMMENDED FOR SOLDER PASTE (reflow soldering)
TYPE THICKNESS IN µm
0603 150 to 200
0805 150 to 200
1206 150 to 200
1210 150 to 200
300
250
200
150
100
50
0
TEMPERATURE (°C)
TIME (s)
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45040
88 Revision: 03-Apr-08
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
PERFORMANCE OF THE TEST(S)
Electrical Test according to component specification
Mounting to PCB
Storage at room temperature (min. 10 h)
Board Flex Test
Details
Failure criteria
X7R PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s).
COG PCB to be deflected in steps untill cracks or other damages are visible or can be measured. Dwell time between
steps: 5 ± 1 s
X7R Piezoelectric sensor, no failure up to 2 mm
COG ΔC/C < 1 % or < 1 pF, no failure up to 3 mm
BOTH Electrical test according to component specification
SMD under test
Solder
Support
1.6 ± 0.1
90 ± 1
45 ± 2
Printed board
before test
R = 3
++
++
Material: Aluminum
20
Printed board
during test
Width = actual width
of substrate + 5 mm
on both sides
Radius
1 to 2
Width
1.5 ± 0.1
0
all dimensions in mm
10 ± 0.1
MOUNTING, DIMENSIONS AND TESTING
MOUNTING
TESTING
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
