VJ....31/VJ....34 Automotive MLCC Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications For more than 20 years Vishay Vitramon has supported the Automotive Industry with robust, highly reliable MLCCs that have made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in "Precious Metal Technology" (PMT/NME) with a wet build process. They are qualified according to AEC Q-200 with PPAP available on request. Applications for these devices include automotive "under the hood", safety and comfort electronics. Their termination finish is 100 % tin plate matte and AgPd which is used with silver epoxy bonding. A Polymer (flexible) termination with 100 % tin plate matte finish is under full qualification and expected to be released early 2008. C0G (NP0) DIELECTRIC X7R DIELECTRIC GENERAL SPECIFICATIONS GENERAL SPECIFICATIONS Note: Electrical characteristics at + 25 C unless otherwise specified Note: Electrical characteristics at + 25 C unless otherwise specified Operating Temperature: - 55 C to + 150 C (above + 125 C characteristics 2.3) Operating Temperature: - 55 C to + 150 C (above + 125 C characteristics 2.3) Temperature Coefficient of Capacitance (TCC): 30 ppm/C from - 55 C to + 125 Capacitance Range: 100 pF to 1.0 F Dissipation Factor (DF): 0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF 0.1 % maximum at 1.0 Vrms and 1 MHz for values > 1000 pF Dissipation Factor (DF): 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz 25 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz Voltage Range: 25 Vdc to 3000 Vdc Aging Rate: 1 % maximum per decade Insulating Resistance: At + 25 C 100 000 M min or 1000 F whichever is less At + 125 C 10 000 M min or 100 F whichever is less Aging: 0 % maximum per decade Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA 200 Vdc: DWV at 250 % of rated voltage 500 Vdc: DWV at 200 % of rated voltage 630 Vdc/1000 Vdc: DWV at 150 % of rated voltage 3000 Vdc: DWV at 120 % of rated voltage www.vishay.com 76 Temperature Coefficient of Capacitance (TCC): X7R: 15 % from - 55 C to 125 C, with 0 Vdc applied X5R: 15 % from - 55 C to 85 C, with 0 Vdc applied (5) Voltage Range: 10 Vdc to 1000 Vdc Insulating Resistance: At + 25 C 100 000 M min. or 1000 F whichever is less At + 125 C 10 000 M min. or 100 F whichever is less Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 s period and the charge/discharge current does not exceed 50 mA 200 Vdc: DWV at 250 % of rated voltage 500 Vdc: DWV at 200 % of rated voltage 630 Vdc/1000 Vdc: DWV at 150 % of rated voltage For technical questions, contact: mlcc@vishay.com Document Number: 45040 Revision: 03-Apr-08 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon PART DESCRIPTION VJ0805 (2) Y 102 K CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE 0402 0603 0805 1206 1210 1812 A = NP0 (C0G) Y = X7R G = X5R (5) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An "R" indicates a decimal point. Examples: 4R7 = 4.7 pF 102 = 1000 pF B = 0.10 pF C = 0.25 pF D = 0.5 pF F=1% G=2% J=5% K = 10 % M = 20 % Note: NP0 (C0G): B, C, D < 10 pF F, G, J 10 pF X7R: J, K, M X A TERMINATION DC VOLTAGE RATING (1) X = Ni barrier 100 % tin plate matte finish B = Polymer 100 % tin plate matte finish (3) Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V T = 400V E = 500 V L = 630 V G = 1000 V H = 3000 V A C 31 MARKING PACKAGING PROCESS CODE 31 = Automotive 100 % tin plate matte finish A = Unmarked B = Marked Note: Marking is only available for 0805 and 1206 vendor ID and date code E = 7" reel/plastic tape C = 7" reel/paper tape M = 11 1/4"/13" reel/plastic tape P = 11 1/4"/13" reel/paper tape PART DESCRIPTION VJ0805 (2) Y 102 K CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE 0402 0603 0805 1206 1210 1812 A = NP0 (C0G) Y = X7R G = X5R (5) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An "R" indicates a decimal point. Examples: 102 = 1000 pF B = 0.10 pF C = 0.25 pF D = 0.5 pF F=1% G=2% J=5% K = 10 % M = 20 % Note: NP0 (C0G) B,C, D < 10 pF F, G, J, 10 pF X7R: J, K, M F A TERMINATION DC VOLTAGE RATING (1) F = AgPd Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V (4) T = 400 V (4) E = 500 V L = 630 V G = 1000 V H = 3000 V A T 34 MARKING PACKAGING PROCESS CODE 34 = Automotive AgPd finish A = Unmarked Note: Marking is not available E = 7" reel/plastic tape O = 7" reel/flamed paper tape M = 11 1/4"/13" reel/plastic tape I = 11 1/4"/13" reel/ flamed paper tape Note: "I" and "O" is used for "F" termination size 0402/0603/0805 Notes: (1) DC voltage rating should not be exceeded in application (2) Case size designator may be replaced by a four digit drawing number (3) Polymer termination under qualification. Expected 2008 (4) Per customer request. Contact: mlcc@vishay.com for availability (5) Selected values for X5R, see dielectric selection chart Document Number: 45040 Revision: 03-Apr-08 For technical questions, contact: mlcc@vishay.com www.vishay.com 77 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon C0G (NP0) DIELECTRIC STYLE EIA TYPE VOLTAGE (Vdc) VJ0402 0402 25 50 100 VJ0603 0603 50 100 200 VJ0805 0805 50 100 200 VJ1210 (1) 1210 VJ1206 1206 500 50 100 200 500/ 630 50 CAP. CAP. CODE 1R0 1.0 pF ** ** ** ** ** ** ** ** ** ** * * * * 1R2 1.2 pF ** ** ** ** ** ** ** ** ** ** * * * * 1R5 1.5 pF ** ** ** ** ** ** ** ** ** ** * * * * 1R8 1.8 pF ** ** ** ** ** ** ** ** ** ** * * * * 2R2 2.2 pF ** ** ** ** ** ** ** ** ** ** * * * * 2R7 2.7 pF ** ** ** ** ** ** ** ** ** ** * * * * 3R3 3.3 pF ** ** ** ** ** ** ** ** ** ** * * * * 3R9 3.9 pF ** ** ** ** ** ** ** ** ** ** * * * * 4R7 4.7 pF ** ** ** ** ** ** ** ** ** ** * * * * 5R6 5.6 pF ** ** ** ** ** ** ** ** ** ** * * * * 6R8 6.8 pF ** ** ** ** ** ** ** ** ** ** * * * * 8R2 8.2 pF ** ** ** ** ** ** ** ** ** ** * * * * 100 10 pF ** ** ** ** ** ** ** ** ** ** * * * * 120 12 pF ** ** ** ** ** ** ** ** ** ** * * * * 150 15 pF ** ** ** ** ** ** ** ** ** ** * * * * 180 18 pF ** ** ** ** ** ** ** ** ** ** * * * * 220 22 pF ++ ++ ++ ** ** ** ** ** ** ** * * * * 270 27 pF ++ ++ ++ ** ** ** ** ** ** ** * * * * 330 33 pF ++ ++ ++ ** ** ** ** ** ** ** * * * * 390 39 pF ++ ++ ++ ** ** ** ** ** ** ** * * * * 470 47 pF ++ ++ ++ ** ** ** ** ** ** ** * * * * 560 56 pF ++ ++ ++ ++ ++ ++ ** ** ** ** * * * * 680 68 pF ++ ++ ++ ++ ++ ++ ** ** ** ** * * * * 820 82 pF ++ ++ ++ ++ ++ ++ ** ** ** ** * * * * 101 100 pF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + + + 121 120 pF ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + + + 151 150 pF ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + + + 181 180 pF ++ ++ ++ ++ + ++ ++ ++ ++ + + + + + 221 220 pF ++ ++ + ++ ++ ++ + + + + + + 271 270 pF ++ ++ + ++ ++ ++ + + + + + + 331 330 pF ++ ++ ++ ++ ++ + + + + + + 391 390 pF ++ ++ ++ ++ ++ + + + + + + 471 470 pF ++ ++ ++ ++ + + + + + 561 560 pF ++ ++ ++ ++ + + + + + 681 680 pF ++ ++ ++ ++ + + + + + 821 820 pF ++ ++ ++ + + + + + 102 1000 pF ++ ++ ++ + + + + + 122 1200 pF ++ + + + + + 152 1500 pF ++ + + + + + 182 1800 pF + + + + + + 222 2200 pF + + + + + 272 2700 pF + + + + + 332 3300 pF + + + + + 392 3900 pF + + + + 472 4700 pF + + + 562 5600 pF + + + 682 6800 pF + + + 822 8200 pF + + + 103 0.010 F + + + 123 0.012 F + 153 0.015 F + 183 0.018 F + 223 0.022 F + 273 0.027 F 333 0.033 F 393 0.039 F 473 0.047 F 563 0.056 F Notes: ** Paper tape, * Plastic tape, ++ Paper tape, + Plastic tape, see table "Product drawings (in use)" (1) See soldering recommendations (2) 1812 - 1000 V/3000 V, please contact for availability: mlcc@vishay.com www.vishay.com 78 For technical questions, contact: mlcc@vishay.com 100 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + VJ1812 (1) (2) 1812 500/ 200 50 100 200 500/ 1000 3000 630 630 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Document Number: 45040 Revision: 03-Apr-08 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon X7R DIELECTRIC (2) STYLE EIA TYPE VOLTAGE (Vdc) CAP. CAP. CODE VJ0402 0402 VJ0603 0603 VJ0805 0805 VJ1210 (1) 1210 VJ1206 1206 VJ1812 (1) (2) 1812 500/ 500/ 16 25 50 100 16 25 50 100 200 10 16 25 50 100 200 500 16 25 50 100 200 16 25 50 100 200 50 100 200 500/ 1000 630 630 630 121 120 pF ** ** ** 151 150 pF ** ** ** 181 180 pF ** ** ** 221 220 pF ** ** ** 271 270 pF ** ** ** 331 330 pF ** ** ** ** ** ** ** 391 390 pF ** ** ** ** ** ** ** ** ** 471 470 pF ** ** ** ** ** ** ** ** ** ** ** ** ** 561 560 pF ** ** ** ** ** ** ** ** ** ** ** ** ** 681 680 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * 821 820 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * 102 1000 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * 122 1200 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * 152 1500 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * 182 1800 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * 222 2200 pF ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * 272 2700 pF ** ** ++ ** ** ** ** ** ** ** ** ** ** * * * * * 332 3300 pF ** ** ++ ** ** ** ** ** ** ** ** ** ** * * * * * 392 3900 pF ** ** ++ ** ** ** ** ** ** ** ** ** ** * * * * * 472 4700 pF ** ** ++ ** ** ** ** ** ** ** ** ** ** * * * * * 562 5600 pF ** ++ ** ** ** ** ** ** ** ** ** * * * * * 682 6800 pF ** ++ ** ** ** ** ** ** ** ** ** * * * * * 822 8200 pF ** ++ ** ** ** ** ** ** ** ** ** * * * * * 103 0.010 F ++ ++ ++ ** ** ** ** ** ** ** ** ** * * * * * 123 0.012 F ++ ++ ** ** ** ** ** ** ** ** * * * * * * 153 0.015 F ++ ++ ** ** ** ++ ** ** ** ** * * * * * * 183 0.018 F ++ ++ ** ** ** ++ ** ** ** ** * * * * * * 223 0.022 F ++ ** ** ** ++ ** ** ** ** * * * * * * 273 0.027 F ++ ** ** ** ++ ** ** ** ** * * * * * 333 0.033 F ++ ** ** ++ ++ ** ** ** * * * * * * 393 0.039 F ** ** ++ ++ ** ** ** * * * * * * 473 0.047 F ** ** ++ ** ** ** * * * * * * 563 0.056 F ** ++ ++ ** ** ** * * * * * * 683 0.068 F ** ++ ++ + + + + * * * * * 823 0.082 F ** ++ ++ + + + + * * * * + 104 0.10 F ++ ++ ++ + + + * * * + + 124 0.12 F + + + + + * * * + 154 0.15 F + + + + + * * + + 184 0.18 F + + * * + + 224 0.22 F + + + + + + 274 0.27 F + + + + + + 334 0.33 F + + + + + 394 0.39 F + + + + 474 0.47 F + + + + 564 0.56 F + + + 684 0.68 F + + + 824 0.82 F + + + 105 1.0 F + + + 125 1.2 F 155 1.5 F 185 1.8 F 225 2.2 F 275 2.7 F 335 3.3 F 395 3.9 F 475 4.7 F 565 5.6 F 685 6.5 F Notes: ** Paper tape, * Plastic tape, ++ Paper tape, + Plastic tape, see table "Product drawings (in use)" (1) Soldering recommendations (2) 1812 - 1000 V/3000 V, please contact for availability: mlcc@vishay.com Document Number: 45040 Revision: 03-Apr-08 For technical questions, contact: mlcc@vishay.com * * * * * * * * * * * * * * * * * * * * * * * * * * + * * * * * * * * * * * * * * * * + + + + + + + + + * * * * * * * * * * * * * * * * + + + + + + + + + * * * * * * * * * * * * * * * * + + + + + + + + + * * * * * * * * * * * * + + + + + + + + + * * * * * * * * * * * * * * * * * * + + + * * * * * * * * * * * * * * * * * * * * * + + + + * * * * * * * * * * * * * * * * * * * + + * * * * * * * * * * * * * * * * + + + + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * www.vishay.com 79 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon PRODUCT DRAWINGS (in use) X-TERMINATION CODE (100 % MATTE TIN) SIZE 0402 0603 0805 1206 1210 1812 (6) F - TERMINATION CODE (AgPd) CODE DRAWING NP0 DRAWING X7R DRAWING NP0 DRAWING X7R ** = Papertape 7175 9172 7175 9072 ++ = Papertape 7172 7172 7072 7072 ** = Papertape 7179 9155 7179 9097 ++ = Papertape 7155 7155 7097 7097 * = Plastictape 7179 9155 7179 9097 + = Plastictape 7155 7155 7097 7097 ** = Papertape 7188 9156 7188 9080 ++ = Papertape 7156 7156 7080 7080 * = Plastictape 7188 9156 7188 9080 + = Plastictape 7156 7156 7080 7080 * = Plastictape 7180 9157 7180 9081 + = Plastictape 7157 7157 7081 7081 * = Plastictape 7190 9158 7190 9099 + = Plastictape 7158 7158 7099 7099 * = Plastictape 7159/7979 7159/9979 7082/7979/9979 9082/7979/9979 + = Plastictape 7159/7979 7159/9159 7979/9979 7082/7979/9979 7082/9082 7979/9979 STANDARD PACKAGING QUANTITIES (1) (2) 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES TAPE SIZE PAPER TAPE PACKAGING CODE "C"/"O" (4) PLASTIC TAPE PACKAGING CODE "E" PAPER TAPE PACKAGING CODE "P"/"I" (4) PLASTIC TAPE PACKAGING CODE "M" 0402 8 mm 5000/10 000 N/a 10 000/30 000 (3) N/a 0603 8 mm 4000 N/a 10 000 N/a 0805 (5) 8 mm 3000 3000 10 000 10 000 1206 (5) 8 mm N/a 3000 N/a 10 000 1210 (5) 8 mm N/a 3000 N/a 10 000 1812 12 mm N/a 1000 N/a 5000 BODY SIZE Notes: (1) REFERENCE: EIA Standard RS 481 - "Taping of Surface Mount Components for Automatic Placement" (2) N/a = Not available (3) Quantity can vary with customer request (4) Flamed paper tape code "O" (7" reel) and "I" (11 1/4/13" reel) for AgPd terminated parts (termination code F) (5) Packaging "C/P" or "E/M" and quantity can depend from product thicknes (6) Drawing 7159/9159 per customer request. Please contact: mlcc@vishay.com www.vishay.com 80 For technical questions, contact: mlcc@vishay.com Document Number: 45040 Revision: 03-Apr-08 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon 1 - GENERAL CERTIFICATES # Quality Management System acc. to ISO/TS 16949 certified Yes # Quality Management System acc. to ISO9000, Rev. 2000 certified Yes # Environmental Certification acc. to ISO 14001 Yes 2 - TECHNICAL REQUIREMENTS Unless specified in component specification, these parameters are the minimum requirements for the components. 2.1 - OPERATING TEMPERATURE RANGE For standard applications TA: - 55 C to + 125 C see characteristics 2.3 For high temperature applications TA: - 55 C to + 150 C see characteristics 2.3 For ultra high temperature applications TA: - 55 C to + 175 C see characteristics 2.3 2.2 - STORAGE TEMPERATURE RANGE TA: - 55 C to + 150 C Comment: Only for the part without packaging 2.3 - CHARACTERISTICS TEST CONDITIONS/ REMARKS PARAMETER CERAMIC TYPE SYMBOL RATINGS Rated voltage in temperature range - 55 C to + 125 C NP0 (C0G), X7R UR 10 V - 500 V Derating at higher temperature NP0 (C0G), X7R N/a 10 V - 100 V + 150 C U 1/2 UR + 175 C U 1/4 UR Temperature coefficient in temperature range - 55 C to + 125 C NP0 (C0G), X7R C C 30 ppm/K 15 % if CR < 10 pF: C 120 ppm/K Temperature coefficient in temperature range - 55 C to + 150 C For typical data see graphs below NP0 (C0G), X7R C C 30 ppm/K + 15/- 30 % + 15/- 50 % - 55 C to + 150 C - 55 C to + 150 C - 55 C to + 175 C NP0 (C0G), X7R tan 0.0015 tan 0.06 Dissipation factor in temperature range - 55 C to + 175 C Document Number: 45040 Revision: 03-Apr-08 For technical questions, contact: mlcc@vishay.com www.vishay.com 81 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon 2.3.1 - C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS TYPICAL PARAMETER C0G (NP0) VOLTAGE COEFFICIENT OF CAPACITANCE - NP0 TYPICAL PARAMETER NP0 (C0G) TEMPERATURE DEPENDENCE OF CAPACITANCE 0.2 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 0.6 0.4 0.2 0.0 - 0.2 - 0.2 - 0.6 0.1 0.0 - 0.1 - 0.2 - 50 0 100 50 150 0 10 20 TEMPERATURE IN C INSULATION RESISTANCE IN M % CAP ACIT ANCE CHANGE 0.2 0.1 0.0 - 0. 1 - 0. 2 10 100 1000 50 60 70 80 90 100 TYPICAL PARAMETER C0G (NP0) ISOLATION RESISTANCE 107 106 105 104 10 000 20 40 60 80 100 120 140 TEMPERATURE IN C HOURS TYPICAL PARAMETER C0G (NP0) CHANGE OF CAPACITANCE WITH FREQUENCY - NP0 TYPICAL PARAMETER C0G (NP0) CHANGE OF CAPACITANCE WITH FREQUENCY +2 0.001 DISSIPATION FACTOR % CAPACITANCE CHANGE 40 DC VOLTS APPLIED TYPICAL PARAMETER C0G (NP0) AGING RATE - NP0 1 30 +1 0.0005 0 -1 0.00025 -2 1 kHz 10 kHz 100 kHz 1 MHz 1 kHz FREQUENCY www.vishay.com 82 For technical questions, contact: mlcc@vishay.com 10 kHz 100 kHz 1 MHz FREQUENCY Document Number: 45040 Revision: 03-Apr-08 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon 2.3.2. COG (NP0) DIELECTRIC - TYPICAL PARAMETERS TYPICAL PARAMETER C0G (NP0) DISSIPATION FACTOR VS. VOLTAGE DISSIPATION FACTOR 0.003 0.002 0.001 0.000 0 10 20 30 40 50 60 70 80 90 100 UN/V VOLTAGE X7R DIELECTRIC - TYPICAL PARAMETERS TYPICAL PARAMETER X7R TEMPERATURE COEFFICIENT OF CAPACITANCE TYPICAL PARAMETER X7R VOLTAGE COEFFICIENT OF CAPACITANCE - X7R 5 10 % CAPACITANE CHANGE % CAPACITANCE CHANGE 15 5 0 -5 X7R - 10 - 15 - 20 - 25 - 30 0 5 - 10 100 V RATED 25 V RATED - 15 50 V RATED - 20 - 25 - 30 - 75 - 50 - 25 0 20 50 75 100 125 150 175 0 10 20 30 40 50 60 70 80 90 TEMPERATURE C DC VOLTS APPLIED TYPICAL PARAMETER X7R VOLTAGE VS. TEMPERATURE MINIMUM ISOLATION RESISTANCE OF X7R CLASS 2 MULTILAYER CERAMIC CAPACITORS 100 INSULATION RESISTANCE IN F 10 000 % VOLTAGE 200 150 100 50 0 - 75 - 50 - 25 0 20 50 75 100 125 150 175 180 1000 100 10 20 40 TEMPERATURE C Document Number: 45040 Revision: 03-Apr-08 For technical questions, contact: mlcc@vishay.com 60 80 100 120 140 160 180 TEMPERATURE IN C www.vishay.com 83 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS TYPICAL PARAMETER X7R DISSIPATION FACTOR VS. VOLTAGE TYPICAL PARAMETER X7R DISSIPATION FACTOR VS. TEMPERATURE 0.020 6.0 5.0 4.5 DISSIPATION FACTOR % DISSIPATION FACTOR 5.5 4.0 3.5 3.0 2.5 X7R 2.0 1.5 1.0 0.5 0.0 0.016 0.012 50 V 0.008 100 V 0.004 - 75 - 50 - 25 0 25 50 7 5 100 125 150 175 0 10 20 30 TEMPERATURE C 60 70 80 90 100 UN/V- TYPICAL PARAMETER X7R CHANGE OF DISSIPATION FACTOR WITH FREQUENCY 1.0 20 % DISSIPATION FACTOR % CAPACITANCE CHANGE 50 VOLTAGE TYPICAL PARAMETER X7R AGING RATE - X7R 0.0 - 1. 0 - 2. 0 - 3. 0 15 10 5 0 - 4. 0 1 10 100 1000 10 000 1 kHz 10 kHz HOURS 100 kHz 1 MHz FREQUENCY TYPICAL PARAMETER X7R CHANGE OF CAPACITANCE WITH FREQUENCY DISSIPATION FACTOR - 10 TYPICAL PARAMETER X7R DISSIPATION FACTOR VS. VOLTAGE 0.020 0 % CAPACITANCE CHANGE 40 0.016 0.012 0.008 200 V 500/630 V 0.000 - 20 1 kHz 10 kHz 100 kHz 1 MHz 0 100 FREQUENCY www.vishay.com 84 For technical questions, contact: mlcc@vishay.com 200 300 400 500 600 VOLTAGE Document Number: 45040 Revision: 03-Apr-08 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon DIMENSIONS in millimeters SIZE LENGTH 0402 0603 0805 1206 1210 1812 1.0 + 0.1/- 0.5 1.6 0.12 2.0 0.2 3.2 0.25 3.2 0.25 4.50 0.25 0.50 0.1 0.8 0.12 1.25 0.2 1.6 0.25 2.5 0.25 3.20 0.25 0.60 0.97 1.40 1.70 1.94 2.18 WIDTH THICKNESS MAXIMUM Information for typical thickness per capacitor is available on request. 3.3. - LOT ACCEPTANCE TESTS Process tests available in classes (on request) CLASS ACTION A Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the selected component to the customer during the component specification discussions. B Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer. C Test with each shipment. Records are provided on a monthly basis. Customer special requirement; requirement should be determined in a specific component specification. The supplier shall submit the records in electronic format on a monthly basis. 3.3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY (BIATS) SAMPLE SIZE 200 HANDLING Mounted on PCB THERMAL SHOCK 1 x 280 C, no pre-heat, 5 to 10 s IR - TEST (IRATS) U = Ur, T = room temperature, verified BURN IN Equivalent to 12 h burn-in, 2 x Ur/125 C, verification time to failure Acceptance criteria: Zero defects (IRATS and BIATS). 3.3.2 BOARD FLEX SAMPLE SIZE 20 pcs/lot X7R Every lot COG At least three different part numbers of one component family matrix per quarter MAX DEFLECTION 8 mm (data to be reported, available on request) 3.3.3 Solderability/Resistance to Soldering Heat Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C. Test is done on a regular basis for samples taken randomly out of the line. Acceptance criteria: At least 95 % new solder and no detachment or leaching of terminations. Solder-ability is guaranteed at least for one year when stored in original package. Remark: For recommendation only for reflow soldering, see range information (on page 1). 4. ENVIRONMENTAL REQUIREMENTS A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available on request. Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the smallest volumes. The manufacturer/supplier confirms that the component during normal handling, storage and assembly, as well as during operation in the automobile, is non toxic. Document Number: 45040 Revision: 03-Apr-08 For technical questions, contact: mlcc@vishay.com www.vishay.com 85 VJ....31/VJ....34 Automotive MLCC Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications 5. INSPECTION CRITERIA 5.1 VISUAL INSPECTION - CRITERIA The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting appropriate to the specimen under test and the required quality level. Chipping The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component shall be less than 5 % of the surface of the MLCC. Delamination or Exposed Electrodes No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of the capacitor must be seen. Metallization For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, ...). Leaching shall not exceed 25 %. A B C Electrode Distance The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes. The minimum distance `d' is 400 m for all package sizes, except 0603. For the component package `0603' the minimum distance is 200 m. D www.vishay.com 86 For technical questions, contact: mlcc@vishay.com Document Number: 45040 Revision: 03-Apr-08 VJ....31/VJ....34 Automotive MLCC Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Vishay Vitramon 6. - BOARD FLEX/DEFINITION OF TEST CONDITIONS PCB PCB thickness = (1.6 0.1) mm Copper thickness = 35 m Material FR4 (EP-GC 02 according to DIN 40 802) LAYOUT/PAD DESIGN Dimensions in mm TYPE PAD SIZE LB 1.0 1.3 1.8 2.8 LL 2.2 3.4 4.5 4.5 0603 0805 1206 1210 LEL 0.75 1.2 1.2 1.3 LB LL = total length; LB = width of the pad; LEL = single pad length LEL LL SOLDERING INSTRUCTIONS Type of recommended solder; reflow: 63/37 SnPb (DIN 32513) wave: 63/37 THICKNESS, RECOMMENDED FOR SOLDER PASTE (reflow soldering) TYPE THICKNESS IN m 0603 150 to 200 0805 150 to 200 1206 150 to 200 1210 150 to 200 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING 300 TEMPERATURE (C) 250 200 150 100 50 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 TIME (s) Document Number: 45040 Revision: 03-Apr-08 For technical questions, contact: mlcc@vishay.com www.vishay.com 87 VJ....31/VJ....34 Automotive MLCC Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications MOUNTING, DIMENSIONS AND TESTING SMD under test MOUNTING 1.6 0.1 Printed board before test + + R=3 45 2 Support Solder 90 1 Width TESTING 20 Material: Aluminum Width = actual width of substrate + 5 mm on both sides Radius 1 to 2 10 0.1 Printed board during test + 1.5 0.1 + 0 all dimensions in mm PERFORMANCE OF THE TEST(S) Electrical Test according to component specification Mounting to PCB Storage at room temperature (min. 10 h) Board Flex Test Details X7R PCB to be deflected continuously, speed 1 mm/s ( 0.5 mm/s). COG PCB to be deflected in steps untill cracks or other damages are visible or can be measured. Dwell time between steps: 5 1 s Failure criteria X7R Piezoelectric sensor, no failure up to 2 mm COG C/C < 1 % or < 1 pF, no failure up to 3 mm BOTH Electrical test according to component specification www.vishay.com 88 For technical questions, contact: mlcc@vishay.com Document Number: 45040 Revision: 03-Apr-08 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1