L4941 Very low drop 1A regulator Feature summary Low dropout voltage (450mV typ. at 1A) Very low quiescent current Thermal shutdown Short circuit protection Reverse polarity protection Description TO-220 The L4941 is a three terminal 5V positive regulators available in TO-220 and DPAK packages, making it useful in a wide range of industrial and consumer applications. Thanks to its very low input/output voltage drop, these devices are particularly suitable for battery powered equipments, reducing consumption and DPAK prolonging battery life. It employs internal current limiting, antisaturation circuit, thermal shut-down and safe area protection. Order code September 2006 Part number Package L4941BV TO-220 L4941BDT-TR DPAK Rev. 5 1/17 www.st.com 17 L4941 Contents 1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Test circuits 5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 7 Schematic application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 ............................................... 6 L4941 Block diagram 1 Block diagram Figure 1. Block diagram 3/17 Pin configuration L4941 2 Pin configuration Figure 2. Pin connections (top view) TO-220 4/17 DPAK L4941 Maximum ratings 3 Maximum ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VI Forward input voltage 30 V VIR Reverse input voltage (RO=100) -15 V IO Output current Internally Limited mA PD Power dissipation Internally Limited mW Tstg Storage temperature range -40 to +150 C Top Operating junction temperature range -40 to +150 C Note: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied Table 2. Thermal Data Symbol Parameter TO-220 DPAK Unit RthJC Thermal resistance junction-case 3 8 C/W RthJA Thermal resistance junction-ambient 50 100 C/W 5/17 Test circuits 4 Test circuits Figure 3. DC Parameters Figure 4. Load rejection Figure 5. Ripple rejection 6/17 L4941 L4941 Electrical characteristics 5 Electrical characteristics Table 3. Electrical characteristics (refer to test circuit, VI=7V, CI = 0.1F, CO = 22F, TJ = 25C, unless otherwise specified.) Symbol Parameter Test conditions Min. Typ. Max. Unit 4.8 5 5.2 V 16 V VO Output voltage IO = 5mA to 1A, VI = 6 to 14V VI Input voltage IO = 5 mA VO Line regulation VI = 6 to 16V, IO = 5 mA 5 20 mV VO IO = 5mA to 1A 8 20 mV Load regulation IO = 0.5A to 1A 5 15 mV IO = 5 mA, VI = 6V 4 8 mA IO = 1A, VI = 6V 20 40 mA 3 mA -10 mA Iq Quiescent current Iq Quiescent current change Vd Dropout voltage VO/T SVR IO = 5 mA, VI = 6 to 14V IO = 1A, VI = 6 to 14V IO = 0.5A 250 450 mV IO = 1A 450 700 mV Output voltage drift Supply voltage rejection f = 120Hz, IO = 1A 58 0.6 mV/C 68 dB VI = 14V 1.6 2.0 VI = 6V 1.8 2.2 Output impedance f = 1KHz, IO = 0.5A 30 m Output noise voltage B = 100Hz to 100KHz 30 V/VO Isc Short circuit current ZO eN A 7/17 Typical application L4941 6 Typical application Figure 6. Dropout voltage vs output current Figure 7. Dropout voltage vs temperature Figure 8. Output voltage vs temperature Figure 9. Quiescent current vs temperature Figure 10. Quiescent current vs input voltage Figure 11. Quiescent current vs output current 8/17 L4941 Typical application Figure 12. Short circuit current vs temperature Figure 13. Peak output current vs input/output differential voltage Figure 14. Low voltage behavior Figure 15. Supply voltage rejection vs frequency Figure 16. Supply voltage rejection vs output current Figure 17. Load dump characteristics 9/17 Typical application Figure 18. Line transient response Figure 20. Load transient response 10/17 L4941 Figure 19. Total power dissipation L4941 7 Schematic application Schematic application Figure 21. Distributed supply with On-card L4940 and L4941 low drop regulator Figure 22. Distributed Supply with On-card L4940 and L4941 low drop regulator ADVANTAGES OF THESE APPLICATION ARE: On card regulation with short-circuit and thermal protection on each output. Vary high total system efficiency due to the switching preregulation and very low-drop postregulation. 11/17 Package mechanical data 8 L4941 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 12/17 L4941 Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. MAX. MIN. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 D1 TYP inch 1.27 TYP. MAX. 0.050 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.203 G1 2.4 2.7 0.094 0.106 H2 10.0 10.40 0.393 L2 16.4 0.409 0.645 L4 13.0 14.0 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.2 6.6 0.244 0.260 L9 3.5 3.93 0.137 0.154 DIA. 3.75 3.85 0.147 0.151 P011C 13/17 Package mechanical data L4941 DPAK MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A A1 A2 B b4 2.2 0.9 0.03 0.64 5.2 2.4 1.1 0.23 0.9 5.4 0.086 0.035 0.001 0.025 0.204 0.094 0.043 0.009 0.035 0.212 C C2 D D1 E E1 0.45 0.48 6 0.6 0.6 6.2 0.017 0.019 0.236 0.023 0.023 0.244 6.6 0.252 e e1 H L (L1) L2 L4 R V2 5.1 6.4 0.200 4.7 0.185 2.28 0.090 4.4 9.35 1 4.6 10.1 0.173 0.368 0.039 2.8 0.8 0.6 0.181 0.397 0.110 0.031 1 0.023 0.2 0 0.260 0.039 0.008 8 0 8 0068772-F 14/17 L4941 Package mechanical data Tape & Reel DPAK-PPAK MECHANICAL DATA mm. inch DIM. MIN. TYP A MAX. MIN. TYP. 330 13.0 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 MAX. 0.504 0.512 22.4 0.519 0.882 Ao 6.80 6.90 7.00 0.268 0.272 0.2.76 Bo 10.40 10.50 10.60 0.409 0.413 0.417 Ko 2.55 2.65 2.75 0.100 0.104 0.105 Po 3.9 4.0 4.1 0.153 0.157 0.161 P 7.9 8.0 8.1 0.311 0.315 0.319 15/17 Revision history L4941 9 Revision history Table 4. Revision history Date Revision 21-Jun-2004 4 Document updating. 15-Sep-2006 5 Order Codes has been updated and new template. 16/17 Changes L4941 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17